Date: Tue, 9 Jul 1996 21:11:52 +1000 (EST) From: michael butler <imb@asstdc.com.au> To: nate@mt.sri.com (Nate Williams) Cc: imb@scgt.oz.au, current@freebsd.org Subject: Re: Thinkpad 560 + -current Message-ID: <199607091111.VAA00328@walkabout.asstdc.com.au> In-Reply-To: <199607081705.LAA13563@rocky.mt.sri.com> from Nate Williams at "Jul 8, 96 11:05:19 am"
next in thread | previous in thread | raw e-mail | index | archive | help
> Hot diggity dog! Glad to hear it. The if_ep driver is generally
> 'better' than the if_zp driver since I've been the only one bringing
> over bug-fixes to the if_zp driver, and I haven't been very dedicated to
> the task. In any case, if_zp will be gone by the time 2.2 is released
> when we have the ability to install via the PC-CARD stuff.
It "feels" much more solid too .. I've now done substantial ftp and NFS
traffic across it and it's not complained or fallen over.
A couple of outstanding concerns .. whilst "lsdev" lists the driver (and
calls the card a 3C509 :-)) snmpd doesn't seem to be happy about it and
dumps core. The actual message is ..
pid 312 (snmpd), uid 0: exited on signal 8
.. when I try an snmpbulkwalk (this is UCD-SNMP).
Back onto the apm stuff .. with APM_DEBUG defined, I get ..
FreeBSD 2.2-CURRENT #0: Tue Jul 9 18:15:52 EST 1996
root@walkabout.asstdc.com.au:/usr/src/sys/compile/WALKABOUT
Calibrating clock(s) relative to mc146818A clock...
i586 clock: 99725720 Hz, i8254 clock: 1193300 Hz
CPU: Pentium (99.71-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x570 Stepping=0
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 16777216 (16384K bytes)
avail memory = 14823424 (14476K bytes)
PC-Card Cirrus Logic PD672X (5 mem & 2 I/O windows)
Add hook "Cirrus Logic PD672X"
Add hook "Cirrus Logic PD672X"
pcic: controller irq 3
Add hook "Cirrus Logic PD672X"
Add hook "Cirrus Logic PD672X"
Probing for devices on PCI bus 0:
chip0 <generic PCI bridge (vendor=8086 device=1235 subclass=0)> rev 1 on pci0:0
chip1 <generic PCI bridge (vendor=8086 device=1234 subclass=128)> rev 2 on pci0:1
vga0 <VGA-compatible display device> rev 211 int a irq ?? on pci0:3
chip2 <generic PCI bridge (vendor=1013 device=1100 subclass=5)> rev 226 int a irq ?? on pci0:19
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
Add hook "system keyboard"
pccard driver ed added
ed0 not found at 0x280
pccard driver sio added
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 not found at 0x2f8
lpt0 at 0x3bc-0x3c3 irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
psm0 at 0x60-0x63 irq 12 on motherboard
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
wdc0 at 0x1f0-0x1f7 irq 14 flags 0x80ff on isa
wdc0: unit 0 (wd0): <IBM-DSOA-20810>, 32-bit, multi-block-16
wd0: 775MB (1587600 sectors), 1575 cyls, 16 heads, 63 S/T, 512 B/S
pccard driver ep added
ep0 not found at 0x300
ze: slot 0: no card in slot
ze: slot 1: no card in slot
ze0 not found at 0x300
zp: slot 0: no card in slot
zp: slot 1: no card in slot
zp0 not found at 0x300
npx0 on motherboard
npx0: INT 16 interface
apm0 on isa
apm: APM BIOS version 0101
apm: Code32 0xf00f85b0, Code16 0xf00f0000, Data 0xf009fc00
apm: Code entry 0x00000000, Idling CPU disabled, Management enabled
apm: CS_limit=ffff, DS_limit=400
apm: Engaged control enabled
apm: found APM BIOS version 1.1
apm: Slow Idling CPU disabled
Add hook "default suspend"
Add hook "default resume"
called apm_event_enable()
Card inserted, slot 0
ep0: utp/bnc[*UTP*] address 00:20:af:fa:df:f5
.. but when I run "apmconf -e", it prints "called apm_event_enable()" and
panics. It will do so with or without PCMCIA cards inserted,
michael
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199607091111.VAA00328>