Date: Tue, 13 May 2008 13:10:03 GMT From: Mel <mel.xyzzy@rachie.is-a-geek.net> To: freebsd-bugs@FreeBSD.org Subject: Re: kern/122572: [install] FreeBSD 7.0 doesn't install on Dell PowerEdge SC1435 Message-ID: <200805131310.m4DDA3uu000385@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR kern/122572; it has been noted by GNATS. From: Mel <mel.xyzzy@rachie.is-a-geek.net> To: bug-followup@freebsd.org, felipe@neuwald.biz Cc: Subject: Re: kern/122572: [install] FreeBSD 7.0 doesn't install on Dell PowerEdge SC1435 Date: Tue, 13 May 2008 15:05:25 +0200 Below is the verbose boot under 6.3-p1. ACPI aml is at: http://freebsd.pastebin.org/35656 There's a second bootable slice waiting to be formatted for 7-stable, if someone wants to pick it up. I don't know for how long the machine is available for non-production work. Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.3-RELEASE-p2 #0: Fri May 9 00:52:47 AKDT 2008 mdev@smell:/home/mdev/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80b31000. Calibrating clock(s) ... i8254 clock: 1193199 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1800073149 Hz CPU: Dual-Core AMD Opteron(tm) Processor 2210 (1800.07-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x40f13 Stepping = 3 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x2001<SSE3,CX16> AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!> AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8> Cores per package: 2 L1 2MB data TLB: 8 entries, fully associative L1 2MB instruction TLB: 8 entries, fully associative L1 4KB data TLB: 32 entries, fully associative L1 4KB instruction TLB: 32 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 2MB unified TLB: 0 entries, disabled/not present L2 4KB data TLB: 512 entries, 4-way associative L2 4KB instruction TLB: 512 entries, 4-way associative L2 unified cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative real memory = 2146402304 (2046 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009ffff, 651264 bytes (159 pages) 0x0000000000c2e000 - 0x000000007c2affff, 2070421504 bytes (505474 pages) avail memory = 2060357632 (1964 MB) ACPI APIC Table: <DELL PE_SC3 > APIC: CPU 0 has ACPI ID 1 MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: Changing APIC ID to 2 ioapic0: Routing external 8259A's -> intpin 0 MADT: Found IO APIC ID 3, Interrupt 32 at 0xfec01000 ioapic1: Changing APIC ID to 3 ioapic1: WARNING: intbase 32 != expected base 16 MADT: Found IO APIC ID 4, Interrupt 64 at 0xfec02000 ioapic2: Changing APIC ID to 4 ioapic2: WARNING: intbase 64 != expected base 48 lapic0: Routing NMI -> LINT1 lapic0: LINT1 trigger: edge lapic0: LINT1 polarity: high lapic1: Routing NMI -> LINT1 lapic1: LINT1 trigger: edge lapic1: LINT1 polarity: high MADT: Ignoring local NMI routed to ACPI CPU 3 MADT: Ignoring local NMI routed to ACPI CPU 4 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Forcing active-low polarity and level trigger for SCI ioapic0: intpin 9 polarity: low ioapic0: intpin 9 trigger: level ioapic0 <Version 1.1> irqs 0-15 on motherboard ioapic1 <Version 1.1> irqs 32-47 on motherboard ioapic2 <Version 1.1> irqs 64-79 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x0001000f pcm: 0x00010000 ath_rate: version 1.2 <SampleRate bit-rate selection algorithm> wlan: <802.11 Link Layer> null: <null device, zero device> random: <entropy source, Software, Yarrow> nfslock: pseudo-device kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> io: <I/O> ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) hptrr: HPT RocketRAID controller driver v1.1 (May 9 2008 00:52:29) rr232x: RocketRAID 232x controller driver v1.02 (May 9 2008 00:52:31) acpi0: <DELL PE_SC3> on motherboard ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48 acpi0: [MPSAFE] acpi0: Power Button (fixed) AcpiOsDerivePciId: \\_SB_.PCI0.PCIR.CNFG -> bus 0 dev 24 func 1 ACPI timer: 0/3 0/3 0/3 0/3 0/4 0/3 0/3 0/4 0/4 0/3 -> 0 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 6 N 0 3 4 5 6 7 10 11 Validation 0 6 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 3 4 5 6 7 10 11 Validation 0 5 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 6 N 0 3 4 5 6 7 10 11 Validation 0 6 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 3 4 5 6 7 10 11 Validation 0 5 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 5 6 7 10 11 Validation 0 10 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link8: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link9: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link10: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link11: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link12: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 5 6 7 10 11 Validation 0 10 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link13: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link14: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link15: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link16: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link17: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link18: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link19: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link20: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link21: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link22: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link23: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link24: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link25: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link26: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link27: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link28: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link29: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link30: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link31: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 Validation 0 255 N 0 3 4 5 6 7 10 11 After Disable 0 255 N 0 3 4 5 6 7 10 11 pci_link32: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 10 11 12 14 Validation 0 11 N 0 3 4 5 6 7 10 11 12 14 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 pci_link33: Index IRQ Rtd Ref IRQs Initial Probe 0 6 N 0 3 4 5 6 7 10 11 12 14 Validation 0 6 N 0 3 4 5 6 7 10 11 12 14 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 acpi_hpet0: vend: 0x1166 rev: 0x1 num: 9 hz: 14318180 opts: leg_route count_size Timecounter "HPET" frequency 14318180 Hz quality 900 cpu0: <ACPI CPU> on acpi0 cpu0: switching to generic Cx mode pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ACPI: Found matching pin for 0.3.INTA at func 0: 11 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 found-> vendor=0x1166, dev=0x0036, revid=0x00 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0205, revid=0x00 bus=0, slot=2, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0147, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0214, revid=0x00 bus=0, slot=2, func=1 class=01-01-8a, hdrtype=0x00, mfdev=1 cmdreg=0x0155, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 000008c0, size 4, enabled found-> vendor=0x1166, dev=0x0234, revid=0x00 bus=0, slot=2, func=2 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0147, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0223, revid=0x01 bus=0, slot=3, func=0 class=0c-03-10, hdrtype=0x00, mfdev=1 cmdreg=0x0157, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base efbed000, size 12, enabled map[14]: type 4, range 32, base 0000d000, size 8, enabled pcib0: matched entry for 0.3.INTA (src \\_SB_.LK01:0) ioapic0: Changing trigger for pin 11 to level ioapic0: Changing polarity for pin 11 to low pcib0: slot 3 INTA routed to irq 11 via \\_SB_.LK01 found-> vendor=0x1166, dev=0x0223, revid=0x01 bus=0, slot=3, func=1 class=0c-03-10, hdrtype=0x00, mfdev=0 cmdreg=0x0157, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base efbee000, size 12, enabled map[14]: type 4, range 32, base 0000d400, size 8, enabled pcib0: matched entry for 0.3.INTA (src \\_SB_.LK01:0) pcib0: slot 3 INTA routed to irq 11 via \\_SB_.LK01 found-> vendor=0x1166, dev=0x0223, revid=0x01 bus=0, slot=3, func=2 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0157, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base efbef000, size 12, enabled map[14]: type 4, range 32, base 0000d800, size 8, enabled pcib0: matched entry for 0.3.INTA (src \\_SB_.LK01:0) pcib0: slot 3 INTA routed to irq 11 via \\_SB_.LK01 found-> vendor=0x1002, dev=0x515e, revid=0x02 bus=0, slot=4, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0187, statreg=0x0290, cachelnsz=16 (dwords) lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 3, range 32, base e0000000, size 27, enabled map[14]: type 4, range 32, base 0000dc00, size 8, enabled map[18]: type 1, range 32, base efbf0000, size 16, enabled pcib0: matched entry for 0.4.INTA pcib0: slot 4 INTA hardwired to IRQ 44 found-> vendor=0x1166, dev=0x0140, revid=0xa2 bus=0, slot=7, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) intpin=a, irq=6 powerspec 3 supports D0 D3 current D0 MSI supports 2 messages, 64 bit pcib0: matched entry for 0.7.INTA pcib0: slot 7 INTA hardwired to IRQ 32 found-> vendor=0x1166, dev=0x0142, revid=0xa2 bus=0, slot=8, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 3 supports D0 D3 current D0 MSI supports 2 messages, 64 bit pcib0: matched entry for 0.8.INTA pcib0: slot 8 INTA hardwired to IRQ 33 found-> vendor=0x1166, dev=0x0144, revid=0xa2 bus=0, slot=9, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 3 supports D0 D3 current D0 MSI supports 2 messages, 64 bit pcib0: matched entry for 0.9.INTA pcib0: slot 9 INTA hardwired to IRQ 37 found-> vendor=0x1166, dev=0x0142, revid=0xa2 bus=0, slot=10, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) intpin=a, irq=6 powerspec 3 supports D0 D3 current D0 MSI supports 2 messages, 64 bit pcib0: matched entry for 0.10.INTA pcib0: slot 10 INTA hardwired to IRQ 35 found-> vendor=0x1166, dev=0x0144, revid=0xa2 bus=0, slot=11, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 3 supports D0 D3 current D0 MSI supports 2 messages, 64 bit pcib0: matched entry for 0.11.INTA pcib0: slot 11 INTA hardwired to IRQ 36 found-> vendor=0x1022, dev=0x1100, revid=0x00 bus=0, slot=24, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1101, revid=0x00 bus=0, slot=24, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1102, revid=0x00 bus=0, slot=24, func=2 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1022, dev=0x1103, revid=0x00 bus=0, slot=24, func=3 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 3 pcib1: subordinate bus 4 pcib1: I/O decode 0xe000-0xefff pcib1: memory decode 0xefc00000-0xefdfffff pcib1: prefetched decode 0xfff00000-0xfffff ACPI: Found matching pin for 3.14.INTA at func 0: 6 pci3: <ACPI PCI bus> on pcib1 pci3: physical bus=3 found-> vendor=0x1166, dev=0x0104, revid=0xc0 bus=3, slot=13, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0157, statreg=0x0230, cachelnsz=64 (dwords) lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x024b, revid=0x00 bus=3, slot=14, func=0 class=01-01-8f, hdrtype=0x00, mfdev=0 cmdreg=0x0147, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=6 powerspec 2 supports D0 D3 current D0 MSI supports 1 message map[10]: type 4, range 32, base 0000ecb0, size 3, enabled pcib1: requested I/O range 0xecb0-0xecb7: in range map[14]: type 4, range 32, base 0000eca0, size 2, enabled pcib1: requested I/O range 0xeca0-0xeca3: in range map[18]: type 4, range 32, base 0000ecb8, size 3, enabled pcib1: requested I/O range 0xecb8-0xecbf: in range map[1c]: type 4, range 32, base 0000eca4, size 2, enabled pcib1: requested I/O range 0xeca4-0xeca7: in range map[20]: type 4, range 32, base 0000ece0, size 4, enabled pcib1: requested I/O range 0xece0-0xecef: in range map[24]: type 1, range 32, base efdfe000, size 13, enabled pcib1: requested memory range 0xefdfe000-0xefdfffff: good pcib1: matched entry for 3.14.INTA (src \\_SB_.LK07:0) ioapic0: Changing trigger for pin 6 to level ioapic0: Changing polarity for pin 6 to low pcib1: slot 14 INTA routed to irq 6 via \\_SB_.LK07 pcib2: <ACPI PCI-PCI bridge> at device 13.0 on pci3 pcib2: secondary bus 4 pcib2: subordinate bus 4 pcib2: I/O decode 0xf000-0xfff pcib2: memory decode 0xfff00000-0xfffff pcib2: prefetched decode 0xfff00000-0xfffff pci4: <ACPI PCI bus> on pcib2 pci4: physical bus=4 atapci0: <ServerWorks HT1000 SATA150 controller> port 0xecb0-0xecb7,0xeca0-0xeca3,0xecb8-0xecbf,0xeca4-0xeca7,0xece0-0xecef mem 0xefdfe000-0xefdfffff irq 6 at device 14.0 on pci3 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xece0 ioapic0: routing intpin 6 (ISA IRQ 6) to vector 49 atapci0: [MPSAFE] ata2: <ATA channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xecb0 atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0xeca0 ata2: reset tp1 mask=03 ostat0=50 ostat1=00 ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata2: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata2: [MPSAFE] ata3: <ATA channel 1> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0xecb8 atapci0: Reserved 0x4 bytes for rid 0x1c type 4 at 0xeca4 ata3: reset tp1 mask=03 ostat0=7f ostat1=7f ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat0=0x7f err=0xff lsb=0xff msb=0xff ata3: stat1=0x7f err=0xff lsb=0xff msb=0xff ata3: reset tp2 stat0=ff stat1=ff devices=0x0 ata3: [MPSAFE] atapci1: <ServerWorks HT1000 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x8c0-0x8cf at device 2.1 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x8c0 ata0: <ATA channel 0> on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER> ioapic0: routing intpin 14 (ISA IRQ 14) to vector 50 ata0: [MPSAFE] ata1: <ATA channel 1> on atapci1 atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci1: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff ioapic0: routing intpin 15 (ISA IRQ 15) to vector 51 ata1: [MPSAFE] isab0: <PCI-ISA bridge> at device 2.2 on pci0 isa0: <ISA bus> on isab0 ohci0: <OHCI (generic) USB controller> port 0xd000-0xd0ff mem 0xefbed000-0xefbedfff irq 11 at device 3.0 on pci0 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xefbed000 ohci0: (New OHCI DeviceId=0x02231166) ioapic0: routing intpin 11 (ISA IRQ 11) to vector 52 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ohci1: <OHCI (generic) USB controller> port 0xd400-0xd4ff mem 0xefbee000-0xefbeefff irq 11 at device 3.1 on pci0 ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xefbee000 ohci1: (New OHCI DeviceId=0x02231166) ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: <OHCI (generic) USB controller> on ohci1 usb1: USB revision 1.0 uhub1: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> port 0xd800-0xd8ff mem 0xefbef000-0xefbeffff irq 11 at device 3.2 on pci0 ehci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xefbef000 ehci0: (New EHCI DeviceId=0x02231166) ehci0: [GIANT-LOCKED] usb2: EHCI version 1.0 usb2: companion controllers, 2 ports each: usb0 usb1 usb2: <EHCI (generic) USB 2.0 controller> on ehci0 usb2: USB revision 2.0 uhub2: (0x1166) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: 4 ports with 4 removable, self powered uhub3: vendor 0x413c product 0xa001, class 9/0, rev 2.00/0.00, addr 2 uhub3: multiple transaction translators uhub3: 2 ports with 2 removable, self powered pci0: <display, VGA> at device 4.0 (no driver attached) pcib3: <ACPI PCI-PCI bridge> irq 32 at device 7.0 on pci0 pcib3: secondary bus 5 pcib3: subordinate bus 5 pcib3: I/O decode 0xf000-0xfff pcib3: memory decode 0xfff00000-0xfffff pcib3: prefetched decode 0xfff00000-0xfffff pci5: <ACPI PCI bus> on pcib3 pci5: physical bus=5 pcib4: <ACPI PCI-PCI bridge> irq 33 at device 8.0 on pci0 pcib4: secondary bus 1 pcib4: subordinate bus 1 pcib4: I/O decode 0xf000-0xfff pcib4: memory decode 0xefe00000-0xefefffff pcib4: prefetched decode 0xfff00000-0xfffff pci1: <ACPI PCI bus> on pcib4 pci1: physical bus=1 found-> vendor=0x14e4, dev=0x1659, revid=0x21 bus=1, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 2 supports D0 D3 current D0 MSI supports 8 messages, 64 bit map[10]: type 1, range 64, base efef0000, size 16, enabled pcib4: requested memory range 0xefef0000-0xefefffff: good pcib4: matched entry for 1.0.INTA pcib4: slot 0 INTA hardwired to IRQ 33 bge0: <Broadcom BCM5750 C1, ASIC rev. 0x4201> mem 0xefef0000-0xefefffff irq 33 at device 0.0 on pci1 bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xefef0000 miibus0: <MII bus> on bge0 brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus0 brgphy0: OUI 0x000818, model 0x0018, rev. 0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge0: bpf attached bge0: Ethernet address: 00:1d:09:0a:3d:3b ioapic1: routing intpin 1 (PCI IRQ 33) to vector 53 bge0: [MPSAFE] pcib5: <ACPI PCI-PCI bridge> irq 37 at device 9.0 on pci0 pcib5: secondary bus 2 pcib5: subordinate bus 2 pcib5: I/O decode 0xf000-0xfff pcib5: memory decode 0xeff00000-0xefffffff pcib5: prefetched decode 0xfff00000-0xfffff pci2: <ACPI PCI bus> on pcib5 pci2: physical bus=2 found-> vendor=0x14e4, dev=0x1659, revid=0x21 bus=2, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 8 messages, 64 bit map[10]: type 1, range 64, base efff0000, size 16, enabled pcib5: requested memory range 0xefff0000-0xefffffff: good pcib5: matched entry for 2.0.INTA pcib5: slot 0 INTA hardwired to IRQ 37 bge1: <Broadcom BCM5750 C1, ASIC rev. 0x4201> mem 0xefff0000-0xefffffff irq 37 at device 0.0 on pci2 bge1: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xefff0000 miibus1: <MII bus> on bge1 brgphy1: <BCM5750 10/100/1000baseTX PHY> on miibus1 brgphy1: OUI 0x000818, model 0x0018, rev. 0 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge1: bpf attached bge1: Ethernet address: 00:1d:09:0a:3d:3c ioapic1: routing intpin 5 (PCI IRQ 37) to vector 54 bge1: [MPSAFE] pcib6: <ACPI PCI-PCI bridge> irq 35 at device 10.0 on pci0 pcib6: secondary bus 6 pcib6: subordinate bus 6 pcib6: I/O decode 0xf000-0xfff pcib6: memory decode 0xfff00000-0xfffff pcib6: prefetched decode 0xfff00000-0xfffff pci6: <ACPI PCI bus> on pcib6 pci6: physical bus=6 pcib7: <ACPI PCI-PCI bridge> irq 36 at device 11.0 on pci0 pcib7: secondary bus 7 pcib7: subordinate bus 7 pcib7: I/O decode 0xf000-0xfff pcib7: memory decode 0xfff00000-0xfffff pcib7: prefetched decode 0xfff00000-0xfffff pci7: <ACPI PCI bus> on pcib7 pci7: physical bus=7 sio0: irq maps: 0x4a01 0x4a11 0x4a01 0x4a01 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A ioapic0: routing intpin 4 (ISA IRQ 4) to vector 55 sio1: irq maps: 0x4a01 0x4a09 0x4a01 0x4a01 sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ioapic0: routing intpin 3 (ISA IRQ 3) to vector 56 ahc_isa_probe 0: ioport 0xc00 alloc failed ahc_isa_probe 13: ioport 0xdc00 alloc failed ahc_isa_probe 14: ioport 0xec00 alloc failed ex_isa_identify() sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xc9000-0xc9fff,0xec000-0xeffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0xffffffff (1) atkbd: failed to reset the keyboard. kbd0 at atkbd0 kbd0: atkbd0, AT 84 (1), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to vector 57 atkbd0: [GIANT-LOCKED] psm0: current command byte:0065 psm0: failed to reset the aux device. fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 ppc0: cannot reserve I/O port range ppc0: <Parallel port> failed to probe at irq 7 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio2: not probed (disabled) sio3: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 isa_probe_children: probing PnP devices ums0: Dell Dell USB Mouse, rev 2.00/1.10, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. ukbd0: vendor 0x1267 product 0x0103, rev 1.10/1.01, addr 3, iclass 3/1 kbd2 at ukbd0 kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000 uhid0: vendor 0x1267 product 0x0103, rev 1.10/1.01, addr 3, iclass 3/1 Device configuration finished. Reducing kern.maxvnodes 132572 -> 100000 procfs registered linprocfs registered lapic: Divisor 2, Frequency 100004069 hz Timecounter "TSC" frequency 1800073149 Hz quality 800 Timecounters tick every 1.000 msec Linux ELF exec handler installed lo0: bpf attached hptrr: no controller detected. rr232x: no controller detected. ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire acd0: setting PIO4 on HT1000 chip acd0: setting UDMA33 on HT1000 chip acd0: <HL-DT-STDVD-ROM GDR-T10N/1.02> DVDROM drive at ata0 as master acd0: read 4134KB/s (4134KB/s), 2048KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet acd0: Writes: acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad4: setting PIO4 on HT1000 chip ad4: DMA limited to UDMA33, device found non-ATA66 cable ad4: setting UDMA33 on HT1000 chip ad4: 76293MB <WDC WD800JD-75MSA3 10.01E04> at ata2-master UDMA33 ad4: 156250000 sectors [155009C/16H/63S] 16 sectors/interrupt 1 depth queue ad4: Adaptec check1 failed ad4: LSI (v3) check1 failed ad4: LSI (v2) check1 failed ad4: FreeBSD check1 failedGEOM: new disk ad4 ATA PseudoRAID loaded Trying to mount root from ufs:/dev/ad4s1a start_init: trying /sbin/init -- Mel
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200805131310.m4DDA3uu000385>