Date: Wed, 1 Jan 2003 14:18:15 +0300 From: "Kirill V. Grigoroff" <slugard@aport.ru> To: freebsd-mobile@FreeBSD.ORG Subject: problem using pcmcia modem on laptop Message-ID: <4965908861.20030101141815@aport.ru>
index | next in thread | raw e-mail
[-- Attachment #1 --]
Hello all!
I'm having a problem using my pcmcia modem that I have on my Xircon
card (Xircom CEM56 [16-bit Ethernet + 56k modem]). When I try to use
kppp with KDE (or ppp with console) it freezes when I try to query the
modem. I couldn't find any references to pcmcia modems in the
handbook, could someone point me in the right direction?
PS: Attached files is "dmesg" output and "pciconf -l" output.
--
Best regards,
Kirill mailto:slugard@aport.ru
[-- Attachment #2 --]
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.7-RELEASE #5: Tue Dec 31 14:22:05 MSK 2002
root@:/usr/src/sys/compile/SLUGGARD
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (908.32-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 251592704 (245696K bytes)
avail memory = 241270784 (235616K bytes)
Preloaded elf kernel "kernel" at 0xc0365000.
VESA: v2.0, 16384k memory, flags:0x0, mode table:0xc02f77a0 (1000040)
VESA: Trident CYBER 8820
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 8 entries at 0xc00f01b0
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <AcerLabs M5247 PCI-PCI(AGP Supported) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <Trident model 8820 VGA-compatible display device> at 0.0 irq 11
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xf7eff000-0xf7efffff irq 11 at device 2.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ums0: HP HP USB WHEEL MOUSE, rev 1.00/0.00, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
atapci0: <AcerLabs Aladdin ATA66 controller> port 0xeff0-0xefff at device 4.0 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pcm0: <Acer Labs M5451> port 0xed00-0xedff mem 0xf7efe000-0xf7efefff irq 11 at device 6.0 on pci0
isab0: <AcerLabs M1533 portable PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
alpm0: <AcerLabs M15x3 Power Management Unit> at device 8.0 on pci0
alpm0: driver is using old-style compatibility shims
pci0: <unknown card> (vendor=0x8086, dev=0x1059) at 10.0 irq 11
pci_cfgintr_linked: linked (1) to hard-routed irq 11
pci_cfgintr: 0:17 INTA routed to irq 11
pcic0: <Toshiba ToPIC100 PCI-CardBus Bridge> irq 11 at device 17.0 on pci0
pcic0: PCI Memory allocated: 0x88000000
pccard0: <PC Card 16-bit bus (classic)> on pcic0
pci_cfgintr_linked: linked (2) to hard-routed irq 11
pci_cfgintr: 0:17 INTB routed to irq 11
pcic1: <Toshiba ToPIC100 PCI-CardBus Bridge> irq 11 at device 17.1 on pci0
pcic1: PCI Memory allocated: 0x88001000
pccard1: <PC Card 16-bit bus (classic)> on pcic1
smbus0: <System Management Bus> on alsmb0
smb0: <SMBus general purpose I/O> on smbus0
orm0: <Option ROMs> at iomem 0xc0000-0xcbfff,0xe0000-0xeffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/15 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: <PNP0c01> can't assign resources
unknown: <PNP0000> can't assign resources
unknown: <PNP0303> can't assign resources
unknown: <PNP0f13> can't assign resources
unknown: <PNP0700> can't assign resources
unknown: <SMCf010> can't assign resources
unknown: <PNP0401> can't assign resources
unknown: <PNP0e03> can't assign resources
ad0: 28615MB <TOSHIBA MK3018GAS> [58140/16/63] at ata0-master UDMA66
acd0: CD-RW <TOSHIBA DVD-ROM SD-R2212> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s2a
pccard: card inserted, slot 0
pccard: card inserted, slot 0
xe0 at port 0x2e8-0x2ef iomem 0xd1000-0xd1fff irq 11 slot 0 on pccard0
xe0: Xircom CEM56, bonding version 0x55, 100Mbps capable, with modem
xe0: DingoID = 0x444b, RevisionID = 0x1, VendorID = 0
xe0: Ethernet address 00:10:a4:ed:fd:79
[-- Attachment #3 --]
chip0@pci0:0:0: class=0x060000 card=0x00000000 chip=0x164410b9 rev=0x01 hdr=0x00
pcib1@pci0:1:0: class=0x060400 card=0x00000000 chip=0x524710b9 rev=0x00 hdr=0x01
ohci0@pci0:2:0: class=0x0c0310 card=0x00041179 chip=0x523710b9 rev=0x03 hdr=0x00
atapci0@pci0:4:0: class=0x0101f0 card=0x00041179 chip=0x522910b9 rev=0xc3 hdr=0x00
pcm0@pci0:6:0: class=0x040100 card=0x00011179 chip=0x545110b9 rev=0x01 hdr=0x00
isab0@pci0:7:0: class=0x060100 card=0x00041179 chip=0x153310b9 rev=0x00 hdr=0x00
alpm0@pci0:8:0: class=0x068000 card=0x00011179 chip=0x710110b9 rev=0x00 hdr=0x00
none0@pci0:10:0: class=0x020000 card=0x00011179 chip=0x10598086 rev=0x10 hdr=0x00
pcic0@pci0:17:0: class=0x060700 card=0x00011179 chip=0x06171179 rev=0x32 hdr=0x02
pcic1@pci0:17:1: class=0x060700 card=0x00011179 chip=0x06171179 rev=0x32 hdr=0x02
none1@pci1:0:0: class=0x030000 card=0x00011179 chip=0x88201023 rev=0x82 hdr=0x00
home |
help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4965908861.20030101141815>