Date: Mon, 4 Mar 2002 17:39:19 -0600 (CST) From: Blake Freeburg <blakef@votris.mrdata.com> To: freebsd-questions@freebsd.org Subject: AC97 & ECS K7S5A (not found) Message-ID: <200203042339.g24NdJZX038548@votris.mrdata.com>
next in thread | raw e-mail | index | archive | help
Hello,
Just wondering if anyone has gotten this to work: The AC97 codec on the ECS Elitegroup K7S5A? (Using a 4.5-stable kernel)
Yes, I have 'option pcm' installed, but nothing shows up in dmesg...
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.5-STABLE #3: Mon Feb 18 20:39:46 CST 2002
root@davros.mrdata.com:/usr/obj/disk6/4.5-src/src/sys/MRDATA
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD Athlon(tm) Processor (896.19-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x642 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,
PSE36,MMX,FXSR>
AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!>
real memory = 805306368 (786432K bytes)
avail memory = 777928704 (759696K bytes)
Preloaded elf kernel "kernel" at 0xc04fe000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 8 entries at 0xc00f7780
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <PCI to PCI bridge (vendor=1039 device=0001)> at device 1.0 on pci0
pci1: <PCI bus> on pcib2
pci1: <NVidia model 0110 graphics accelerator> at 0.0 irq 0
isab0: <SiS 85c503 PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
ohci0: <SiS 5571 USB controller> mem 0xcfffa000-0xcfffafff irq 5 at device 2.2 on
pci0
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xcfffb000-0xcfffbfff irq 11 at device 2.3 on
pci0
usb1: OHCI version 1.0, legacy support
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
atapci0: <SiS 5591 ATA100 controller> port 0xff00-0xff0f at device 2.5 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x1039, dev=0x7012) at 2.7 irq 11
sis0: <SiS 900 10/100BaseTX> port 0xc000-0xc0ff mem 0xcfff5000-0xcfff5fff irq 11 a
t device 3.0 on pci0
sis0: Ethernet address: 00:07:95:1f:c5:d6
miibus0: <MII bus> on sis0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: <ADMtek AN985 10/100BaseTX> port 0xbc00-0xbcff mem 0xcfff4c00-0xcfff4fff irq
11 at device 11.0 on pci0
dc0: Ethernet address: 00:04:5a:53:80:2e
miibus1: <MII bus> on dc0
ukphy1: <Generic IEEE 802.3u media interface> on miibus1
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: <3Com 3c905-TX Fast Etherlink XL> port 0xb800-0xb83f irq 11 at device 13.0 on
pci0
xl0: Ethernet address: 00:60:97:26:50:7d
miibus2: <MII bus> on xl0
nsphy0: <DP83840 10/100 media interface> on miibus2
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atapci1: <Promise TX2 ATA133 controller> port 0xcc00-0xcc0f,0xd000-0xd003,0xd400-0
xd407,0xd800-0xd803,0xdc00-0xdc07 mem 0xcfffc000-0xcfffffff irq 5 at device 15.0 o
n pci0
ata2: at 0xdc00 on atapci1
ata3: at 0xd400 on atapci1
bktr0: <BrookTree 878> mem 0xcddfe000-0xcddfefff irq 11 at device 17.0 on pci0
bktr0: Hauppauge Model 38101 B210
bktr0: Hauppauge WinCast/TV, Philips NTSC tuner.
pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 17.1 irq 11
pcib1: <SiS 5591 host to AGP bridge> on motherboard
pci2: <PCI bus> on pcib1
orm0: <Option ROMs> at iomem 0xc0000-0xcc7ff,0xcc800-0xcefff,0xcf000-0xd6fff on is
a0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: failed to get data.
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: <PNP0000> can't assign resources
unknown: <PNP0303> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0400> can't assign resources
unknown: <PNP0700> can't assign resources
unknown: <PNP0f13> can't assign resources
IP packet filtering initialized, divert enabled, rule-based forwarding disabled, d
efault to deny, logging disabled
ad0: 19073MB <Maxtor 2B020H1> [38752/16/63] at ata0-master UDMA100
ad4: 19541MB <Maxtor 52049H4> [39703/16/63] at ata2-master UDMA100
ad5: 29311MB <Maxtor 53073U6> [59554/16/63] at ata2-slave UDMA66
ad6: 117246MB <Maxtor 4G120J6> [238216/16/63] at ata3-master UDMA133
ad7: 114473MB <WDC WD1200BB-00CAA0> [232581/16/63] at ata3-slave UDMA100
acd0: CD-RW <10X4X32> at ata1-master using PIO4
Mounting root from ufs:/dev/ad0s1a
Blake
--
... esse quam videri
blakef@mrdata.com :email
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200203042339.g24NdJZX038548>