Date: Fri, 9 May 1997 16:01:21 -0500 (CDT) From: Paul Saab <spaul@more.net> To: freebsd-questions@FreeBSD.ORG Subject: HP NetServer 5/100 LS2 Message-ID: <199705092101.QAA14175@yogurt.apg.more.net>
next in thread | raw e-mail | index | archive | help
Hello,
I have a HP NetServer 5/100 LS2 which is running BSDi that I want
to convert to FreeBSD. I read the FAQ about the netserver and did
what it said and the boot disk still does not detect the SCSI
controllers. Has anyone tried installing FreeBSD on a machine like
this? Thanks.
Below is the bootup messages from BSDi if that helps any.
Paul Saab
spaul@more.net
---
BSDI BSD/OS 2.1 Kernel #0: Thu Mar 13 20:56:01 CST 1997
paul@spider.arach-net.com:/usr/src/sys/compile/GENERIC
cpu = Pentium (about 100 MHz) model 2, stepping 5
delay multiplier 2548
real mem = 67108864
avail mem = 64434176
buffer cache = 6545408
isa0 (root)
eisa0 at root
pci0 at root: configuration mechanism 1
pccons0 at isa0 iobase 0x60 irq 1: color, 8 screens
pcaux0 at isa0 iobase 0x60 irq 12
com0 at isa0 iobase 0x3f8 irq 4: buffered (16550AF)
com1 at isa0 iobase 0x2f8 irq 3: buffered (16550AF)
lp0 at isa0 iobase 0x378 irq 7
fdc0 at isa0 iobase 0x3f0 irq 6 drq 2: floppy controller
fd0 at fdc0 slave 0: 1.44M HD 3.5 floppy
npx0 at isa0 iobase 0xf0: math coprocessor
vga0 at isa0 iobase 0x3c0 maddr 0xa0000-0xaffff: VGA graphics
aic0 at pci0 irq 11 maddr 0xff9ff000-0xff9ff0ff
aic0: initiator id 7, parity enabled
aic0: delaying to permit certain devices to finish self-test
tg0 at aic0 target 1
sd0 at tg0 unit 0: disk: HP 2.13 GB 1st ### rev 1221 (SCSI-2) 4165272*512
tg0: disconnect enabled, synchronous at 10.0MB/s, max offset 8
tg1 at aic0 target 5
sr0 at tg1 unit 0: CD-ROM: TOSHIBA CD-ROM XM-5301TA rev 1895 (SCSI-2) removable
tg1: disconnect enabled, synchronous at 4.4MB/s, max offset 8
aic1 at pci0 irq 9 maddr 0xff9fe000-0xff9fe0ff
aic1: initiator id 7, parity enabled
aic1: delaying to permit certain devices to finish self-test
ne0 at isa0 iobase 0x340 irq 5: NE-2000, address 00:40:05:14:89:19
pe0 at isa0/lp0: Pocket Ethernet-2
xir0 at isa0/lp0: Pocket Ethernet-3
changing root device to sd0a
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199705092101.QAA14175>