Date: Wed, 27 Aug 2003 16:28:11 -0400 (EDT) From: Adam K Kirchhoff <adamk@voicenet.com> To: Lee Damon <nomad@castle.org> Cc: current@freebsd.org Subject: Re: recent 5.1-CURRENT kernel panics on acd0 probe/attach, IBM T30 laptop Message-ID: <Pine.LNX.4.33L2.0308271615560.14769-100000@thorn.ashke.com> In-Reply-To: <200308271755.h7RHt5nx043212@castle.org>
next in thread | previous in thread | raw e-mail | index | archive | help
I'm seeing the same thing on my desktop box. I thought that atapicam might solve my DVD playback problems so I recompiled the kernel with the atapicam device and this was the result: CPU: Intel Pentium III (1002.28-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x68a Stepping = 10 Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE> real memory = 536805376 (511 MB) avail memory = 515506176 (491 MB) Programming 24 pins in IOAPIC #0 IOAPIC #0 intpin 2 -> irq 0 FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x00178011, at 0xfec00000 bktr_mem: memory holder loaded Pentium Pro MTRR support enabled npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <VIA694 AWRDACPI> on motherboard pcibios: BIOS version 2.10 Using $PIR table, 8 entries at 0xc00fdd20 acpi0: power button is handled as a fixed feature programming model. Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_cpu1: <CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0x6000-0x607f,0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 IOAPIC #0 intpin 11 -> irq 2 IOAPIC #0 intpin 10 -> irq 5 IOAPIC #0 intpin 5 -> irq 10 agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem 0xf0000000-0xf7ffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 drm0: <ATI Radeon QL R200 8500 LE> port 0xc000-0xc0ff mem 0xf9000000-0xf900ffff,0xe0000000-0xefffffff irq 10 at device 0.0 on pci1 info: [drm] AGP at 0xf0000000 128MB info: [drm] Initialized radeon 1.9.0 20020828 on minor 0 isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C686B UDMA100 controller> port 0xd000-0xd00f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <serial bus, USB> at device 7.2 (no driver attached) pci0: <serial bus, USB> at device 7.3 (no driver attached) pci0: <bridge, PCI-unknown> at device 7.4 (no driver attached) fxp0: <Intel 82559 Pro/100 Ethernet> port 0xdc00-0xdc3f mem 0xfb000000-0xfb0fffff,0xfb101000-0xfb101fff irq 5 at device 8.0 on pci0 fxp0: Ethernet address 00:d0:b7:90:6c:3e miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ahc0: <Adaptec 19160B Ultra160 SCSI adapter> port 0xe000-0xe0ff mem 0xfb100000-0xfb100fff irq 2 at device 9.0 on pci0 aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs pci0: <serial bus, FireWire> at device 10.0 (no driver attached) bktr0: <BrookTree 878> mem 0xfb103000-0xfb103fff irq 10 at device 11.0 on pci0 bktr0: Hauppauge Model 44801 D126 bktr0: Hauppauge WinCast/TV, Philips NTSC tuner. pci0: <multimedia> at device 11.1 (no driver attached) pci0: <multimedia, audio> at device 12.0 (no driver attached) pci0: <input device> at device 12.1 (no driver attached) fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A, console sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ppc0 port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model MouseMan+, device ID 0 orm0: <Option ROMs> at iomem 0xd0000-0xd3fff,0xc0000-0xccfff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 APIC_IO: Testing 8254 interrupt delivery APIC_IO: routing 8254 via IOAPIC #0 intpin 2 Timecounters tick every 10.000 msec acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0% ad0: 39083MB <Maxtor 5T040H4> [79408/16/63] at ata0-master UDMA100 acd0: DVDROM <Pioneer DVD-ROM ATAPIModel DVD-120> at ata0-slave PIO4 ad2: 117246MB <Maxtor 6Y120L0> [238216/16/63] at ata1-master UDMA100 Waiting 3 seconds for SCSI devices to settle Fatal trap 12: page fault while in kernel mode cpuid = 0; lapic.id = 00000000 fault virtual address = 0x0 fault code = supervisor write, page not present instruction pointer = 0x8:0xc017d4ae stack pointer = 0x10:0xd7142abc frame pointer = 0x10:0xd7142ac8 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 19 (swi3: cambio) trap number = 12 panic: page fault cpuid = 0; lapic.id = 00000000 syncing disks, buffers remaining... done Uptime: 3s acd0: FAILURE - FLUSHCACHE status=51<READY,DSC,ERROR> error=4<ABORTED> Shutting down ACPI Automatic reboot in 15 seconds - press a key on the console to abort --> Press a key on the console to reboot, --> or switch off the system now. Rebooting... On Wed, 27 Aug 2003, Lee Damon wrote: > : || tylendel.castle.org [10] ; uname -a > FreeBSD tylendel.castle.org 5.1-CURRENT FreeBSD 5.1-CURRENT #38: Wed Aug 27 09:05:21 PDT 2003 root@tylendel.castle.org:/users/FreeBSD-5.0/obj/users/FreeBSD-5.0/src/sys/TYLENDEL i386 > > The kernel I compiled on 20 AUG recognizes acd0 and loggs the following: > > Aug 27 08:24:10 tylendel kernel: acd0: CD-RW <UJDA720 DVD/CDRW> at ata1-master U > DMA33 > Aug 27 08:24:10 tylendel kernel: cd0 at ata1 bus 0 target 0 lun 0 > Aug 27 08:24:10 tylendel kernel: cd0: <MATSHITA UJDA720 DVD/CDRW 1.03> Removable > CD-ROM SCSI-0 device > Aug 27 08:24:10 tylendel kernel: cd0: 33.000MB/s transfers > Aug 27 08:24:10 tylendel kernel: cd0: Attempt to query device size failed: NOT R > EADY, Medium not present - tray closed > > However, kernels compiled since Monday's SUP get as far as the initial > discovery of the acd0 device and then panic with: > > fatal trap 12: page fault while in kernel mode > fault virtual address = 0x0 > fault code = supervisor write, page not present > instruction pointer = 0x8 :0xc015ca8e > stack pointer = 0x10 :0xdd79aaac > frame pointer = 0x10 :0xdd79aab8 > code segment = base 0x0, limit 0xfffff, type 0x1b > = DPL 0, pres 1, def 32 1, gran 1 > processor eflags = interrupt enabled, resume, IOPL=0 > current process = 19 (swi 3: cambio) > kernel: type 12 trap, code=0 > Stopped at free_hcb+0x2e: mov1 %eax,0(xedx) > > When I remove the DVD/CDRW from the system it boots. > > Kernel configuration is the one from R. Kevin Oberman with firewire > turned on. >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.LNX.4.33L2.0308271615560.14769-100000>