Date: Wed, 3 May 2000 21:43:46 -0400 (EDT) From: Jim Weeks <jim@siteplus.net> To: freebsd-isp@freebsd.org Subject: Dead seagate drive Message-ID: <Pine.BSF.4.21.0005032113180.86718-100000@discover.siteplus.net>
next in thread | raw e-mail | index | archive | help
I have a problem with a ST39140W Seagate SCSI drive. I have two of these attached to a BT-958 Mylex adapter and after a power outage one of them wouldn't come back up. I am getting a device not configured error when trying to mount. A copy of dmesg shows that the drive is recognized which in this case is da1, but mount spits out the error not configured. kernel: da0 at bt0 bus 0 target 0 lun 0 kernel: da0: Fixed Direct Access SCSI-2 device kernel: da0: 20.000MB/s transfers (10.000MHz, offset 15, 16bit), Tagged Queueing Enabled kernel: da0: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C) kernel: da1 at bt0 bus 0 target 1 lun 0 kernel: da1: Fixed Direct Access SCSI-2 device kernel: da1: 20.000MB/s transfers (10.000MHz, offset 15, 16bit), Tagged Queueing Enabled kernel: da1: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C) /stand/sysinstall also sees the drive, but when I try to configure through the partition manager there is no data listed in the configuration screen. I have also remade the device through MAKEDEV. Of course I think this probably is redundant since kernel sees the device, but is unable to mount. I am thinking at this point that the drive is just dead. Any other advice would be appreciated. Thanks, Jim Weeks To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-isp" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0005032113180.86718-100000>