Date: Sun, 27 Aug 2000 22:28:34 -0400 (EDT) From: Systems Administrator <geniusj@ods.org> To: questions@freebsd.org Cc: current@freebsd.org Subject: Monitor dies and doesn't come back. Message-ID: <Pine.BSF.4.21.0008272224550.32974-100000@ods.org>
next in thread | raw e-mail | index | archive | help
I've been having a strange problem recently after installing a new
harddrive.. the harddrive works fine in other OS's, but in FreeBSD,
(seemingly after the HD install), the Monitor (CTX VL19") goes into
powersaving and you cant get it back without doing a cold reboot.. not
even a warm reboot will work. I am not sure exactly what is happening
here, perhaps something borked? I have a Western Digital Caviar 45GB drive
running at UDMA33.
dmesg output follows:
FreeBSD 5.0-CURRENT #1: Sat Aug 26 00:24:22 MDT 2000
geniusj@phreebsd.org:/usr2/src/sys/compile/FREEBSD
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 501138733 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (501.14-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x673 Stepping = 3
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PA
T,PSE36,MMX,FXSR,XMM>
real memory = 134217728 (131072K bytes)
avail memory = 127107072 (124128K bytes)
Preloaded elf kernel "kernel" at 0xc037e000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc037e09c.
Preloaded elf module "splash_bmp.ko" at 0xc037e0ec.
Preloaded elf module "vesa.ko" at 0xc037e190.
Preloaded splash_image_data "/boot/splash.bmp" at 0xc037e22c.
Preloaded elf module "snd_emu10k1.ko" at 0xc037e27c.
Preloaded elf module "snd_pcm.ko" at 0xc037e320.
Pentium Pro MTRR support enabled
VESA: v3.0, 16384k memory, flags:0x1, mode table:0xc02f43b7 (1000117)
VESA: 3dfx Interactive, Inc.
npx0: <math processor> on motherboard
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pci0: <Intel 82443BX (440 BX) host to PCI bridge> at 0.0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2 irq 5
pci0: <Intel 82371AB Power management controller> at 7.3
pcm0: <Creative EMU10K1> port 0xe400-0xe41f irq 10 at device 13.0 on pci0
pci0: <3Dfx Voodoo 3 graphics accelerator> at 15.0 irq 11
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ed0 at port 0x240-0x25f iomem 0xd8000-0xd9fff irq 3 on isa0
ed0: address 00:e0:29:16:cb:72, type SMC8416T (16 bit)
sc1: <System console> on isa0
sc1: MDA <16 virtual consoles, flags=0x0>
vga1: <Generic ISA VGA> at port 0x3b0-0x3bb iomem 0xb0000-0xb7fff on isa0
unknown: <PNP0303> can't assign resources
unknown: <PNP0f13> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0700> can't assign resources
IP packet filtering initialized, divert enabled, rule-based forwarding
enabled,
default to deny, logging limited to 100 packets/entry by default
IP Filter: v3.4.9 initialized. Default = pass all, Logging = enabled
ad0: 9671MB <WDC AC310100B> [19650/16/63] at ata0-master using UDMA33
ad1: 42934MB <WDC WD450AA-00BAA0> [87233/16/63] at ata0-slave using UDMA33
acd0: CD-RW <PLEXTOR CD-R PX-W8432T> at ata1-master using WDMA2
acd1: CDROM <FX001DE> at ata1-slave using PIO3
Mounting root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
Any help would be appreciated. Thanks! (Sorry, no panic, so that's all I
could get)
-JD-
----
Jason DiCioccio - IBM Global Services - djason@us.ibm.com - www.ibm.com
Systems Admin - Open Domain Server - geniusj@ods.org - www.ods.org
FreeBSD - The Power to Serve - - www.freebsd.org
----
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.21.0008272224550.32974-100000>