Date: Fri, 10 Nov 2000 06:26:04 -0500 From: Jamil Taylor <jamil_taylor@pobox.com> To: stable@FREEBSD.ORG Subject: CDROM Issues with Stable Message-ID: <3A0BDB4C.37BAE939@pobox.com>
next in thread | raw e-mail | index | archive | help
I've noticed people losing access to their CD-ROM with stable. Well, I
just upgraded from 4.1.1 Stable to 4.2 Beta, and lost my ATAPI CD-ROM as
well. In checking dmesg output, it appears the USB controller is using
the same IRQ that the IDE controller uses. Perhaps this has something to
do with the problem?
TIA
uname -rsm
FreeBSD 4.2-BETA i386
dmesg
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.2-BETA #1: Thu Nov 9 23:39:36 EST 2000
jamil@netaxs.com:/usr/src/sys/compile/STANDARD
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD Athlon(tm) Processor (952.16-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x622 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory = 536870912 (524288K bytes)
config> di bt0
config> di aic0
config> di aha0
config> di adv0
config> q
avail memory = 517492736 (505364K bytes)
Preloaded elf kernel "kernel" at 0xc042a000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc042a09c.
Preloaded elf module "splash_bmp.ko" at 0xc042a0ec.
Preloaded splash_image_data "/boot/splash.bmp" at 0xc042a190.
Preloaded elf module "vesa.ko" at 0xc042a1e0.
VESA: v2.0, 32768k memory, flags:0x1, mode table:0xc00c6a0b (c0006a0b)
VESA: Matrox Graphics Inc.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <PCI to PCI bridge (vendor=1106 device=8391)> at device 1.0 on
pci0
pci1: <PCI bus> on pcib2
pci1: <Matrox MGA G400 AGP graphics accelerator> at 0.0 irq 11
isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA66 controller> port 0xc000-0xc00f at device 7.1
on pci0
uhci0: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 14 at device
7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1: Texas Instruments UT-USB41 hub, class 9/0, rev 1.10/1.10, addr 2
uhub1: 4 ports with 4 removable, bus powered
uhid0: Microsoft Microsoft SideWinder Precision Pro (USB), rev
1.00/1.00, addr 3, iclass 3/0
ums0: AIPTEK APT-6000U, rev 1.00/1.00, addr 4, iclass 3/1
ums0: 7 buttons
ugen0: 3Com 3Com HomeConnect USB Camera , rev 1.00/1.06, addr 5
ahc0: <Adaptec 2930CU SCSI adapter> port 0xcc00-0xccff mem
0xdb004000-0xdb004fff irq 11 at device 8.0 on pci0
aic7860: Single Channel A, SCSI Id=7, 3/255 SCBs
sym0: <1010-33> port 0xd000-0xd0ff mem
0xdb000000-0xdb001fff,0xdb006000-0xdb0063ff irq 10 at device 9.0 on pci0
sym0: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym0: handling phase mismatch from SCRIPTS.
sym0: SCAN AT BOOT disabled for targets 3 4 5 8 9 10 11 12 13 14 15.
sym0: SCAN FOR LUNS disabled for targets 0 1 2 3 4 5 6 8 9 10 11 12 13
14 15.
sym1: <1010-33> port 0xd400-0xd4ff mem
0xdb002000-0xdb003fff,0xdb005000-0xdb0053ff irq 10 at device 9.1 on pci0
sym1: Symbios NVRAM, ID 7, Fast-80, SE, parity checking
sym1: open drain IRQ line driver, using on-chip SRAM
sym1: using LOAD/STORE-based firmware.
sym1: handling phase mismatch from SCRIPTS.
sym1: SCAN AT BOOT disabled for targets 0 1 2 3 6 8 9 10 11 12 13 14 15.
sym1: SCAN FOR LUNS disabled for targets 0 1 2 3 4 5 6 8 9 10 11 12 13
14 15.
pcm0: <Creative EMU10K1> port 0xd800-0xd81f irq 5 at device 10.0 on pci0
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xe000-0xe07f mem
0xdb007000-0xdb00707f irq 14 at device 11.0 on pci0
xl0: Ethernet address: 00:01:02:3c:58:8c
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bktr0: <BrookTree 878> mem 0xdb008000-0xdb008fff irq 14 at device 12.0
on pci0
bktr0: Hauppauge Model 61381 D423
bktr0: Detected a MSP3430G-A4 at 0x80
bktr0: Hauppauge WinCast/TV, Philips FR1236 NTSC FM tuner, msp3400c
stereo, remote control.
pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 12.1 irq 14
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device ID 4
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: IEEE1284 device found /NIBBLE/ECP
Probing for PnP devices on ppbus0:
ppbus0: <HEWLETT-PACKARD HP 2000C> PCL,MLC,PML
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
Waiting 9 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
(noperiph:sym1:0:-1:-1): SCSI BUS reset delivered.
sa0 at sym0 bus 0 target 6 lun 0
sa0: <SEAGATE DAT 06240-XXX 8110> Removable Sequential Access SCSI-3
device
sa0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit)
pass0 at ahc0 bus 0 target 3 lun 0
pass0: <HP C7670A 3925> Fixed Processor SCSI-2 device
pass0: 3.300MB/s transfers
Mounting root from ufs:/dev/da0s3a
da0 at sym0 bus 0 target 0 lun 0
da0: <SEAGATE ST318404LW 0006> Fixed Direct Access SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz, offset 62, 16bit), Tagged
Queueing Enabled
da0: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
da2 at sym0 bus 0 target 2 lun 0
da2: <SEAGATE ST318404LW 0006> Fixed Direct Access SCSI-3 device
da2: 160.000MB/s transfers (80.000MHz, offset 62, 16bit), Tagged
Queueing Enabled
da2: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
da1 at sym0 bus 0 target 1 lun 0
da1: <SEAGATE ST318404LW 0006> Fixed Direct Access SCSI-3 device
da1: 160.000MB/s transfers (80.000MHz, offset 62, 16bit), Tagged
Queueing Enabled
da1: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
da3 at sym1 bus 0 target 5 lun 0
da3: <FUJITSU MCD3130SS 0020> Removable Optical SCSI-2 device
da3: 10.000MB/s transfers (10.000MHz, offset 15)
da3: 217MB (446325 512 byte sectors: 64H 32S/T 217C)
cd0 at sym1 bus 0 target 4 lun 0
cd0: <YAMAHA CRW8424S 1.0j> Removable CD-ROM SCSI-2 device
cd0: 20.000MB/s transfers (20.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
- tray closed
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3A0BDB4C.37BAE939>