Date: Mon, 5 Apr 2021 14:35:04 +0200 From: infoomatic <infoomatic@gmx.at> To: freebsd-virtualization@freebsd.org Subject: Re: bhyve iommu passthru ath0 Message-ID: <d89354c8-e86a-2e72-df37-a6ae10697a70@gmx.at> In-Reply-To: <275fb099-a036-05fc-bd1f-706e1d01ff98@gmx.at> References: <275fb099-a036-05fc-bd1f-706e1d01ff98@gmx.at>
next in thread | previous in thread | raw e-mail | index | archive | help
fyi: I gave 13.0-RC4 a try, but this did not work out neither... On 28.03.21 21:56, infoomatic wrote: > Hi all, > > I own a pcengines apu2e4 where bhyve passthru is working in general. > Passing through the i210AT NICs works fine. However, I bought a Compex > WLE200NX a/b/g/n miniPCI card which is based on the Qualcomm Atheros > AR9280 chip I also want to pass through. > > On the host I am running 12.2-RELEASE-p5. > > my loader.conf: > > hw.vmm.amdvi.enable=3D1 > vmm_load=3D"YES" > pptdevs=3D"1/0/0 3/0/0 4/0/0" > hw.vmm.iommu.enable=3D1 > > > pciconf -lv gives (relevant info; with igb0 used on the host): > > ppt0@pci0:1:0:0:=C2=A0=C2=A0=C2=A0 class=3D0x028000 card=3D0x3099168c ch= ip=3D0x002a168c > rev=3D0x01 hdr=3D0x00 > =C2=A0=C2=A0=C2=A0 vendor=C2=A0=C2=A0=C2=A0=C2=A0 =3D 'Qualcomm Atheros' > =C2=A0=C2=A0=C2=A0 device=C2=A0=C2=A0=C2=A0=C2=A0 =3D 'AR928X Wireless N= etwork Adapter (PCI-Express)' > =C2=A0=C2=A0=C2=A0 class=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 =3D network > igb0@pci0:2:0:0:=C2=A0=C2=A0=C2=A0 class=3D0x020000 card=3D0x00008086 ch= ip=3D0x157b8086 > rev=3D0x03 hdr=3D0x00 > =C2=A0=C2=A0=C2=A0 vendor=C2=A0=C2=A0=C2=A0=C2=A0 =3D 'Intel Corporation= ' > =C2=A0=C2=A0=C2=A0 device=C2=A0=C2=A0=C2=A0=C2=A0 =3D 'I210 Gigabit Netw= ork Connection' > =C2=A0=C2=A0=C2=A0 class=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 =3D network > =C2=A0=C2=A0=C2=A0 subclass=C2=A0=C2=A0 =3D ethernet > ppt1@pci0:3:0:0:=C2=A0=C2=A0=C2=A0 class=3D0x020000 card=3D0x00008086 ch= ip=3D0x157b8086 > rev=3D0x03 hdr=3D0x00 > =C2=A0=C2=A0=C2=A0 vendor=C2=A0=C2=A0=C2=A0=C2=A0 =3D 'Intel Corporation= ' > =C2=A0=C2=A0=C2=A0 device=C2=A0=C2=A0=C2=A0=C2=A0 =3D 'I210 Gigabit Netw= ork Connection' > =C2=A0=C2=A0=C2=A0 class=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 =3D network > =C2=A0=C2=A0=C2=A0 subclass=C2=A0=C2=A0 =3D ethernet > ppt2@pci0:4:0:0:=C2=A0=C2=A0=C2=A0 class=3D0x020000 card=3D0x00008086 ch= ip=3D0x157b8086 > rev=3D0x03 hdr=3D0x00 > =C2=A0=C2=A0=C2=A0 vendor=C2=A0=C2=A0=C2=A0=C2=A0 =3D 'Intel Corporation= ' > =C2=A0=C2=A0=C2=A0 device=C2=A0=C2=A0=C2=A0=C2=A0 =3D 'I210 Gigabit Netw= ork Connection' > =C2=A0=C2=A0=C2=A0 class=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 =3D network > =C2=A0=C2=A0=C2=A0 subclass=C2=A0=C2=A0 =3D ethernet > > > in my vm-bhyve config I have > passthru0=3D"1/0/0" > passthru1=3D"4/0/0" > > > which works nicely with the i210 adapter, but not with the wifi adapter. > The wifi adapter also works when not passing through and using it via > the host. In the VM (tried both the 12.2-RELEASE and 13.0-RC3), I have > tried to load/unload various modules (or e.g. tried > dev.ath.0.hal.force_full_reset=3D1), I do not get any connections, wifi > scans/lists do not work. Other configurations result in "ath0: Device > timeout" or in "wlan0: CTRL-EVENT-SCAN-FAILED ret=3D-1 retry=3D1". > > > Any ideas how to resolve that? > > > Regards, > > Robert > > _______________________________________________ > freebsd-virtualization@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-virtualization > To unsubscribe, send any mail to "freebsd-virtualization-unsubscribe@fre= ebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?d89354c8-e86a-2e72-df37-a6ae10697a70>