Date: Wed, 02 Jun 2004 09:59:10 +0200 From: =?ISO-8859-1?Q?S=F8ren_Schmidt?= <sos@DeepCore.dk> To: conrads@cox.net Cc: freebsd-current@freebsd.org Subject: Re: atapi problems getting weirder and weirder Message-ID: <40BD88CE.5090607@DeepCore.dk> In-Reply-To: <XFMail.20040601172423.conrads@cox.net> References: <XFMail.20040601172423.conrads@cox.net>
next in thread | previous in thread | raw e-mail | index | archive | help
Conrad Sabatier wrote: > I had posted recently about a problem I was having with a CD-RW drive on > acd1 (ata1-slave). It does appear that this particular piece of hardware > has seen better days and is in need of replacement. > > However, after my latest upgrade (FreeBSD 5.2-CURRENT #1: Mon May 31 > 22:52:53 CDT 2004), things have gotten considerably stranger re: both of my > ATAPI devices: > > # atacontrol list > ATA channel 0: > Master: ad0 <Maxtor 94091U8/FA520S60> ATA/ATAPI revision 5 > Slave: ad1 <WDC WD800BB-32BSA0/12.08C12> ATA/ATAPI revision 5 > ATA channel 1: > Master: no device present > Slave: acd0 <R/RW 4x4x24/C12a> ATA/ATAPI revision 0 > > The ata1-master device (a COMPAQ DVD-ROM), which was working just fine > before, is now no longer being found at boot time, nor by using any > subsequent atacontrol commands, and as you can see, the broken slave device > is now being attached as acd0. Bizarre! > > I've rebooted/powered down, twiddled with the BIOS, enabled/disabled ACPI, > rebuilt the kernel with and without APIC, ATA_STATIC_ID, all to no avail. > This is just crazy! > > I'm quite sure there's nothing wrong with the master device. It was > working fine until this upgrade. I'm completely at a loss as to what's > going on or how to proceed. > > Any input will be much appreciated. What happens if you remove the faulty device ? -- -Søren
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?40BD88CE.5090607>