Date: Wed, 22 Oct 2014 17:32:49 +0200 From: Kazik Chujwielki <dmilith@gmail.com> To: freebsd-current@freebsd.org Subject: Re: ZFS: i/o error - all block copies unavailable #2 Message-ID: <58828806-78BC-4113-88C6-F465BD19D915@gmail.com> In-Reply-To: <5447C9E0.3010903@freebsd.org> References: <B6E7646B-9A7D-43BF-B25A-5488D37B5CA5@gmail.com> <5447C9E0.3010903@freebsd.org>
index | next in thread | previous in thread | raw e-mail
> On 22 Oct 2014, at 17:14, Allan Jude <allanjude@freebsd.org> wrote: > > On 2014-10-22 10:33, Kazik Chujwielki wrote: >> … >> >> So, I tried with upgrading to 9.3, installing bootcode from 9.3, then I booted 10.0, installed boot code again.. nothing helps. >> >> Still ends on http://s.verknowsys.com/1a4f147cbb215da9b16eb61a7e9de9ed26470338.png <http://s.verknowsys.com/1a4f147cbb215da9b16eb61a7e9de9ed26470338.png>; >> >> I also tried scrubbing my pool, from ZFS point of view everything is just "fine”. No data errors.. it’s machine with ECC RAM, so corruption shouldn’t take place.. >> >> Do you have ANY ideas? >> >> thanks >> >> _______________________________________________ >> freebsd-current@freebsd.org mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-current >> To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org" >> > > Does the FreeBSD boot loader see any other disks? I've seen something > similar to this in a case where a machine had 12 drives and the boot > loader only saw the first 8 or something, so was missing too many blocks. > > -- > Allan Jude > it’s virtually one disk - mfid0 Under the hood it’s 36 drives in HW raid10 (LSI) HW raid10 matrix is detected before boot process (before all the LSI controller is booting).. but currently I’m in a big hole, blindly looking for anything at all that might help.. thanks Daniel (dmilith) Dettlaffhelp
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?58828806-78BC-4113-88C6-F465BD19D915>