Date: Thu, 21 Nov 2002 14:26:36 +0200 From: Vallo Kallaste <kalts@estpak.ee> To: Robert Watson <rwatson@freebsd.org> Cc: freebsd-current@freebsd.org Subject: Re: Weird ACPI related problem Message-ID: <20021121122636.GA1826@tiiu.internal> In-Reply-To: <Pine.NEB.3.96L.1021120122534.40737e-100000@fledge.watson.org> References: <20021120164124.GA2951@tiiu.internal> <Pine.NEB.3.96L.1021120122534.40737e-100000@fledge.watson.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, Nov 20, 2002 at 12:27:08PM -0500, Robert Watson <rwatson@freebsd.org>
wrote:
> Well, it's definitely not intended behavior :-). A few questions for you:
>
> (1) How much memory does this machine have? How much swap space is
> configured at the point where you get to the swapspace failure?
>
> (2) What exactly were the messages you pointed out in the bootup regardin
> the load of acpi.ko? Could you provide us with verbose dmesg output?
I've booted up with 0:fd(0,a)/boot/loader -hv by interacting with
boot2 I think, still there's no verbose boot messages, sorry. Here's
what I got, cut-n-paste from xterm. There is no swap configured at all
accordingly to swapinfo. The getty attaches to internal console, so
there's some commands and responses missing just before
'swap_pager_getswapspace: failed' line. Those are:
# swapinfo
Device 1K-blocks Used Avail Capacity Type
# cd /boot/kernel
# kldload acpi.ko
[now comes the..]
swap_pager_getswapspace: failed
Console: serial port
BIOS drive A: is disk0
BIOS drive B: is disk1
BIOS drive C: is disk2
BIOS 639kB/128256kB available memory
FreeBSD/i386 bootstrap loader, Revision 1.1
(root@ushi.jp.freebsd.org, Mon Nov 18 21:57:03 GMT 2002)
/kernel text=0x3e38e8 data=0x52cfc+0x818c8 syms=[0x4+0x4c7c0+0x4+0x5b140]
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/kernel]...
ACPI autoload failed - no such file or directory
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT-20021119-JPSNAP #0: Mon Nov 18 23:40:09 GMT 2002
root@ushi.jp.freebsd.org:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/kernel" at 0xc0662000.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 1699956616 Hz
CPU: Pentium 4 (1699.96-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf13 Stepping = 3
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
real memory = 132382720 (126 MB)
avail memory = 121856000 (116 MB)
Initializing GEOMetry subsystem
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using $PIR table, 9 entries at 0xc00f3d20
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82845 (i845 GMCH) SVGA controller> mem 0xffa80000-0xffafffff,0xf0000000-0xf7ffffff irq 11 at device 2.0 on pci0
agp0: detected 892k stolen memory
agp0: aperture size is 128M
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xe800-0xe81f irq 11 at device 29.0 on pci0
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xe880-0xe89f irq 9 at device 29.1 on pci0
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xec00-0xec1f irq 10 at device 29.2 on pci0
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pcib1: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0
pci1: <PCI bus> on pcib1
fxp0: <Intel Pro/100 Ethernet> port 0xdc00-0xdc3f mem 0xff8ff000-0xff8fffff irq 11 at device 8.0 on pci1
fxp0: Ethernet address 00:03:47:29:85:a5
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 ATA100 controller> port 0xffa0-0xffaf,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <multimedia, audio> at device 31.5 (no driver attached)
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0400> can't assign resources (port)
unknown: <PNP0c02> can't assign resources (port)
unknown: <PNP0303> can't assign resources (port)
Timecounters tick every 10.000 msec
ata1-slave: timeout waiting for interrupt
ata1-slave: ATAPI identify failed
ad0: 19541MB <Maxtor 2B020H1> [39703/16/63] at ata0-master UDMA100
acd0: CDROM <CD-540E> at ata1-master PIO4
Mounting root from cd9660:cd0a
setrootbyname failed
iso_mountroot: can't find rootvp
Root mount failed: 6
Mounting root from cd9660:acd0a
cd9660: RockRidge Extension
Enter full pathname of shell or RETURN for /bin/sh:
+---------------------------------------------------------------+
| You are now running from FreeBSD "fixit" media. |
| ------------------------------------------------------------- |
| When you're finished with this shell, please type exit. |
| The fixit media is mounted as /mnt2. |
| |
| You might want to symlink /mnt/etc/*pwd.db and /mnt/etc/group |
| to /etc after mounting a root filesystem from your disk. |
| tar(1) will not restore all permissions correctly otherwise! |
| |
| Note: you might use the arrow keys to browse through the |
| command history of this shell. |
+---------------------------------------------------------------+
Good Luck!
Fixit# exit
Entropy harvesting: interrupts ethernet point_to_point.
fstab: /etc/fstab:0: No such file or directory
Fast boot: skipping disk checks.
fstab: /etc/fstab:0: No such file or directory
fstab: /etc/fstab:0: No such file or directory
mount: /: unknown special file or file system
fstab: /etc/fstab:0: No such file or directory
rm: utmp: Read-only file system
cp: utmp: Read-only file system
/etc/rc.d/cleanvar: cannot create /var/run/clean_var: Read-only file system
Reloading rc.conf.
Doing initial network setup:
hostname.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
inet 127.0.0.1 netmask 0xff000000
Additional routing options:.
Mounting NFS file systems:fstab: /etc/fstab:0: No such file or directory
.
rm: utmp: Read-only file system
cp: utmp: Read-only file system
/etc/rc.d/cleanvar: cannot create /var/run/clean_var: Read-only file system
eval: cannot create /var/run/syslogd.sockets: Read-only file system
Starting syslogd.
syslogd: cannot create /var/run/log: Read-only file system
syslogd: child pid 172 exited with return code 1
eval: cannot create /var/run/dmesg.boot: Read-only file system
ELF ldconfig path: /usr/lib /usr/lib/compat
ldconfig: mkstemp(/var/run/ld-elf.so.hints.gNUyPf): Read-only file system
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout
ldconfig: /var/run/ld.so.hints.ZhJgJUglRq: Read-only file system
Starting local daemons:.
mktemp: mkstemp failed on /tmp/_motd.ltNSjC: Read-only file system
Updating motd.
eval: cannot create : No such file or directory
eval: cannot create : No such file or directory
usage: cmp [-l | -s | -x] [-z] file1 file2 [skip1 [skip2]]
usage: cp [-R [-H | -L | -P]] [-f | -i | -n] [-pv] src target
cp [-R [-H | -L | -P]] [-f | -i | -n] [-pv] src1 ... srcN directory
Configuring syscons: blanktime.
Initial i386 initialization:.
Additional ABI support:.
Local package initialization:.
Additional TCP options:.
/etc/rc.d/msgs: cannot create /var/msgs/bounds: Read-only file system
Reloading rc.conf.
Starting cron.
cron: can't open or create /var/run/cron.pid: Read-only file system
Starting background file system checks.
Thu Nov 21 14:15:21 GMT 2002
swap_pager_getswapspace: failed
--
Vallo Kallaste
kalts@estpak.ee
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20021121122636.GA1826>