Date: Tue, 3 May 2005 22:20:46 -0400 From: "dave" <dmehler26@woh.rr.com> To: <freebsd-questions@freebsd.org> Subject: external usb2 drive enclosure on 5.3 Message-ID: <002501c5504f$e1fd75d0$0200a8c0@satellite>
next in thread | raw e-mail | index | archive | help
Hello, I've got a 5.3 box that i'd like to plug a usb2 drive enclosure in to. I'm concerned about 5.3's detection of my usb ports, they're all usb2 ports, yet some of them are showing up as only usb1. Here's my usb information: uhci0: <VIA 83C572 USB controller> port 0xde00-0xde1f irq 11 at device 16.0 on pci0 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <VIA 83C572 USB controller> port 0xdf00-0xdf1f irq 11 at device 16.1 on pci0 usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <VIA 83C572 USB controller> port 0xe000-0xe01f irq 11 at device 16.2 on pci0 usb2: <VIA 83C572 USB controller> on uhci2 usb2: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: <VIA 83C572 USB controller> port 0xe100-0xe11f irq 11 at device 16.3 on pci0 usb3: <VIA 83C572 USB controller> on uhci3 usb3: USB revision 1.0 uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: <VIA VT6202 USB 2.0 controller> mem 0xe8115000-0xe81150ff irq 10 at device 16.4 on pci0 ehci_pci_attach: companion usb0 ehci_pci_attach: companion usb1 ehci_pci_attach: companion usb2 ehci_pci_attach: companion usb3 usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: <VIA VT6202 USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: single transaction translator uhub4: 8 ports with 8 removable, self powered The enclosure itself is for a 20 gb 2.5 inch laptop hard drive, and it has two cables coming out of it, one for power the other data. I'm wondering if it matters which controller one should plug them into or if that doesn't matter at all? The enclosure was purchased from CompUSA and all i can say is that at least this one shows up, the sandisk one, was a no show. When i plug in the enclosure here's the output i get: (da0:umass-sim0:0:0:0): SCSI Status: Check Condition (da0:umass-sim0:0:0:0): MEDIUM ERROR info?:202020 asc:11,20 (da0:umass-sim0:0:0:0): Reserved ASC/ASCQ pair (da0:umass-sim0:0:0:0): Retrying Command (per Sense Data) (da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 0 0 0 0 0 0 1 0 (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI Status: Check Condition (da0:umass-sim0:0:0:0): MEDIUM ERROR info?:202020 asc:11,20 (da0:umass-sim0:0:0:0): Reserved ASC/ASCQ pair (da0:umass-sim0:0:0:0): Retrying Command (per Sense Data) (da0:umass-sim0:0:0:0): READ(10). CDB: 28 0 0 0 0 0 0 0 1 0 (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI Status: Check Condition (da0:umass-sim0:0:0:0): MEDIUM ERROR info?:202020 asc:11,20 That repeats. Any help appreciated. Thanks. Dave.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?002501c5504f$e1fd75d0$0200a8c0>