Date: Tue, 15 Jun 2004 19:20:56 -0400 From: "Michael Roberts" <tpen0010@hotmail.com> To: freebsd-current@freebsd.org Subject: bfe0 with/without acpi -- "watchdog timeout" error Message-ID: <Sea1-F659WFHpwSPE0u0004e968@hotmail.com>
next in thread | raw e-mail | index | archive | help
hi,
i've run into a problem with -current, which wasn't there with 5.2 stable.
when i boot the system with acpi enabled, the bfe0 ethernet device loads up
and works for a short period of time, after which it gives the error
"watchdog timeout -- resetting".
after scanning the mailing lists, i saw that other people had had problems
with acpi.. but for me, disabling acpi is what works. with acpi disabled,
bfe0 does not reset, and i can use the interface just fine (sic i am able to
send this message... :)
so -- what do i do to get both acpi and bfe0 running at the same time? i've
attached my dmesg's -- with and without acpi enabled. also, uname.
thanks for any help.
mike
ps. otherwise freebsd is working perfectly on my inspiron 8600! there were
a few things i had to play with to get the soundcard, wireless, videocard,
etc., working, but it wasn't so bad. if someone wants me to write a mini
howto, i'd be glad.
~# uname -a
FreeBSD 5.2-CURRENT FreeBSD 5.2-CURRENT #0: Mon Jun 14 15:07:00 EDT 2004
root:/usr/obj/usr/src/sys/POPTKERNEL i386
DMESG WITH ACPI
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #0: Mon Jun 14 15:07:00 EDT 2004
root@trace.cable.rcn.com:/usr/obj/usr/src/sys/POPTKERNEL
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0c69000.
Preloaded elf module "/boot/kernel/snd_driver.ko" at 0xc0c691cc.
Preloaded elf module "/boot/kernel/snd_vibes.ko" at 0xc0c6927c.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc0c6932c.
Preloaded elf module "/boot/kernel/snd_via82c686.ko" at 0xc0c693d8.
Preloaded elf module "/boot/kernel/snd_via8233.ko" at 0xc0c6948c.
Preloaded elf module "/boot/kernel/snd_t4dwave.ko" at 0xc0c6953c.
Preloaded elf module "/boot/kernel/snd_solo.ko" at 0xc0c695ec.
Preloaded elf module "/boot/kernel/snd_sbc.ko" at 0xc0c6969c.
Preloaded elf module "/boot/kernel/snd_sb16.ko" at 0xc0c69748.
Preloaded elf module "/boot/kernel/snd_sb8.ko" at 0xc0c697f8.
Preloaded elf module "/boot/kernel/snd_neomagic.ko" at 0xc0c698a4.
Preloaded elf module "/boot/kernel/snd_mss.ko" at 0xc0c69958.
Preloaded elf module "/boot/kernel/snd_maestro3.ko" at 0xc0c69a04.
Preloaded elf module "/boot/kernel/snd_maestro.ko" at 0xc0c69ab8.
Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc0c69b68.
Preloaded elf module "/boot/kernel/snd_fm801.ko" at 0xc0c69c14.
Preloaded elf module "/boot/kernel/snd_ess.ko" at 0xc0c69cc4.
Preloaded elf module "/boot/kernel/snd_es137x.ko" at 0xc0c69d70.
Preloaded elf module "/boot/kernel/snd_emu10k1.ko" at 0xc0c69e20.
Preloaded elf module "/boot/kernel/snd_ds1.ko" at 0xc0c69ed0.
Preloaded elf module "/boot/kernel/snd_csa.ko" at 0xc0c69f7c.
Preloaded elf module "/boot/kernel/snd_cs4281.ko" at 0xc0c6a028.
Preloaded elf module "/boot/kernel/snd_cmi.ko" at 0xc0c6a0d8.
Preloaded elf module "/boot/kernel/snd_als4000.ko" at 0xc0c6a184.
Preloaded elf module "/boot/kernel/snd_ad1816.ko" at 0xc0c6a234.
Preloaded elf module "/boot/modules/nvidia.ko" at 0xc0c6a2e4.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc0c6a390.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0c6a43c.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 2.00GHz (1993.54-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6d6 Stepping = 6
Features=0xafe9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,C
LFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
real memory = 536535040 (511 MB)
avail memory = 511053824 (487 MB)
random: <entropy source, Software, Yarrow>
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL CPi R > on motherboard
acpi0: [GIANT-LOCKED]
pcibios: BIOS version 2.10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU (4 Cx states)> port 0x530-0x537 on acpi0
acpi_tz0: <Thermal Zone> port 0x530-0x537 on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_cmbat1: <Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 29 INTA is routed to irq 11
pcib0: slot 29 INTB is routed to irq 10
pcib0: slot 29 INTC is routed to irq 10
pcib0: slot 29 INTD is routed to irq 5
pcib0: slot 31 INTB is routed to irq 5
pcib0: slot 31 INTB is routed to irq 5
agp0: <Intel 82855 host to AGP bridge> mem 0xe0000000-0xe7ffffff at device
0.0 o
n pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib1: slot 0 INTA is routed to irq 11
nvidia0: <GeForce FX Go5200> mem 0xd0000000-0xdfffffff,0xfc000000-0xfcffffff
irq
11 at device 0.0 on pci1
nvidia0: [GIANT-LOCKED]
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xbf80-0xbf9f irq 11
at
device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xbf40-0xbf5f irq 10
at
device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xbf20-0xbf3f irq 10
at
device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib2: slot 0 INTA is routed to irq 10
pcib2: slot 1 INTA is routed to irq 10
pcib2: slot 3 INTA is routed to irq 5
bfe0: <Broadcom BCM4401 Fast Ethernet> mem 0xfaffe000-0xfaffffff irq 10 at
devic
e 0.0 on pci2
miibus0: <MII bus> on bfe0
bmtphy0: <BCM4401 10/100baseTX PHY> on miibus0
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bfe0: Ethernet address: 00:0f:1f:15:e6:b5
bfe0: [GIANT-LOCKED]
cbb0: <TI4510 PCI-CardBus Bridge> at device 1.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib2: slot 1 INTA is routed to irq 10
fwohci0: vendor=104c, dev=8029
fwohci0: <1394 Open Host Controller Interface> mem
0xfaff8000-0xfaffbfff,0xfaffd
800-0xfaffdfff irq 10 at device 1.1 on pci2
fwohci0: [GIANT-LOCKED]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 32:4f:c0:00:34:ec:78:81
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 32:4f:c0:ec:78:81
fwe0: Ethernet address: 32:4f:c0:ec:78:81
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci2: <network> at device 3.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port
0xbfa0-0xbfaf,0x376,0x170-0x177,0x
3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pcm0: <Intel ICH4 (82801DB)> port 0xbc40-0xbc7f,0xb800-0xb8ff mem
0xf4fff400-0xf
4fff4ff,0xf4fff800-0xf4fff9ff irq 5 at device 31.5 on pci0
pcm0: [GIANT-LOCKED]
pcm0: <SigmaTel STAC9750/51 AC97 Codec>
pci0: <simple comms> at device 31.6 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model GlidePoint, device ID 0
orm0: <Option ROMs> at iomem 0xcf800-0xcffff,0xc0000-0xcf7ff on isa0
pmtimer0 on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1993541593 Hz quality 800
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
cpu0: Performance states changed
ad0: 57231MB <TOSHIBA MK6021GAS> [116280/16/63] at ata0-master UDMA100
acd0: CDRW <_NEC DVD+RW ND-6100A> at ata1-master UDMA33
cd0 at ata1 bus 0 target 0 lun 0
cd0: <_NEC DVD+RW ND-6100A 104D> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: cd present [134358 x 2048 byte records]
Mounting root from ufs:/dev/ad0s4a
Warning: pid 634 used static ldt allocation.
See the i386_set_ldt man page for more info
bfe0: watchdog timeout -- resetting
bfe0: watchdog timeout -- resetting
bfe0: watchdog timeout -- resetting
bfe0: watchdog timeout -- resetting
DMESG WITHOUT ACPI
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #0: Mon Jun 14 15:07:00 EDT 2004
root@trace.cable.rcn.com:/usr/obj/usr/src/sys/POPTKERNEL
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0c1c000.
Preloaded elf module "/boot/kernel/snd_driver.ko" at 0xc0c1c1cc.
Preloaded elf module "/boot/kernel/snd_vibes.ko" at 0xc0c1c27c.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc0c1c32c.
Preloaded elf module "/boot/kernel/snd_via82c686.ko" at 0xc0c1c3d8.
Preloaded elf module "/boot/kernel/snd_via8233.ko" at 0xc0c1c48c.
Preloaded elf module "/boot/kernel/snd_t4dwave.ko" at 0xc0c1c53c.
Preloaded elf module "/boot/kernel/snd_solo.ko" at 0xc0c1c5ec.
Preloaded elf module "/boot/kernel/snd_sbc.ko" at 0xc0c1c69c.
Preloaded elf module "/boot/kernel/snd_sb16.ko" at 0xc0c1c748.
Preloaded elf module "/boot/kernel/snd_sb8.ko" at 0xc0c1c7f8.
Preloaded elf module "/boot/kernel/snd_neomagic.ko" at 0xc0c1c8a4.
Preloaded elf module "/boot/kernel/snd_mss.ko" at 0xc0c1c958.
Preloaded elf module "/boot/kernel/snd_maestro3.ko" at 0xc0c1ca04.
Preloaded elf module "/boot/kernel/snd_maestro.ko" at 0xc0c1cab8.
Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc0c1cb68.
Preloaded elf module "/boot/kernel/snd_fm801.ko" at 0xc0c1cc14.
Preloaded elf module "/boot/kernel/snd_ess.ko" at 0xc0c1ccc4.
Preloaded elf module "/boot/kernel/snd_es137x.ko" at 0xc0c1cd70.
Preloaded elf module "/boot/kernel/snd_emu10k1.ko" at 0xc0c1ce20.
Preloaded elf module "/boot/kernel/snd_ds1.ko" at 0xc0c1ced0.
Preloaded elf module "/boot/kernel/snd_csa.ko" at 0xc0c1cf7c.
Preloaded elf module "/boot/kernel/snd_cs4281.ko" at 0xc0c1d028.
Preloaded elf module "/boot/kernel/snd_cmi.ko" at 0xc0c1d0d8.
Preloaded elf module "/boot/kernel/snd_als4000.ko" at 0xc0c1d184.
Preloaded elf module "/boot/kernel/snd_ad1816.ko" at 0xc0c1d234.
Preloaded elf module "/boot/modules/nvidia.ko" at 0xc0c1d2e4.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc0c1d390.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 2.00GHz (1993.54-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6d6 Stepping = 6
Features=0xafe9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,C
LFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
real memory = 536535040 (511 MB)
avail memory = 511062016 (487 MB)
random: <entropy source, Software, Yarrow>
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 9 Entries> on motherboard
$PIR: BIOS IRQ 11 for 0.29.INTB is not valid for link 0x63
$PIR: BIOS IRQ 11 for 2.1.INTA is not valid for link 0x63
pci0: <PCI bus> on pcib0
$PIR: 0:29 INTA routed to irq 11
$PIR: 0:29 INTC routed to irq 11
$PIR: 0:29 INTD routed to irq 11
$PIR: 0:31 INTB routed to irq 11
$PIR: 0:31 INTB routed to irq 11
agp0: <Intel 82855 host to AGP bridge> mem 0xe0000000-0xe7ffffff at device
0.0 o
n pci0
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
$PIR: 1:0 INTA routed to irq 11
nvidia0: <GeForce FX Go5200> mem 0xd0000000-0xdfffffff,0xfc000000-0xfcffffff
irq
11 at device 0.0 on pci1
nvidia0: [GIANT-LOCKED]
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xbf80-0xbf9f irq 11
at
device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xbf40-0xbf5f irq 11
at
device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xbf20-0xbf3f irq 11
at
device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib2: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
$PIR: 2:0 INTA routed to irq 11
$PIR: 2:3 INTA routed to irq 11
bfe0: <Broadcom BCM4401 Fast Ethernet> mem 0xfaffe000-0xfaffffff irq 11 at
devic
e 0.0 on pci2
miibus0: <MII bus> on bfe0
bmtphy0: <BCM4401 10/100baseTX PHY> on miibus0
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bfe0: Ethernet address: 00:0f:1f:15:e6:b5
bfe0: [GIANT-LOCKED]
cbb0: <TI4510 PCI-CardBus Bridge> irq 11 at device 1.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
fwohci0: vendor=104c, dev=8029
fwohci0: <1394 Open Host Controller Interface> mem
0xfaff8000-0xfaffbfff,0xfaffd
800-0xfaffdfff irq 11 at device 1.1 on pci2
fwohci0: [GIANT-LOCKED]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 32:4f:c0:00:34:ec:78:81
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 32:4f:c0:ec:78:81
fwe0: Ethernet address: 32:4f:c0:ec:78:81
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci2: <network> at device 3.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port
0xbfa0-0xbfaf,0x376,0x170-0x177,0x
3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pcm0: <Intel ICH4 (82801DB)> port 0xbc40-0xbc7f,0xb800-0xb8ff mem
0xf4fff400-0xf
4fff4ff,0xf4fff800-0xf4fff9ff irq 11 at device 31.5 on pci0
pcm0: [GIANT-LOCKED]
pcm0: <SigmaTel STAC9750/51 AC97 Codec>
pci0: <simple comms> at device 31.6 (no driver attached)
cpu0 on motherboard
orm0: <Option ROMs> at iomem 0xcf800-0xcffff,0xc0000-0xcf7ff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model GlidePoint, device ID 0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
ppc1: parallel port not found.
Timecounter "TSC" frequency 1993538047 Hz quality 800
Timecounters tick every 10.000 msec
ad0: 57231MB <TOSHIBA MK6021GAS> [116280/16/63] at ata0-master UDMA100
acd0: CDRW <_NEC DVD+RW ND-6100A> at ata1-master UDMA33
cd0 at ata1 bus 0 target 0 lun 0
cd0: <_NEC DVD+RW ND-6100A 104D> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: cd present [134358 x 2048 byte records]
Mounting root from ufs:/dev/ad0s4a
_________________________________________________________________
MSN 9 Dial-up Internet Access fights spam and pop-ups – now 3 months FREE!
http://join.msn.click-url.com/go/onm00200361ave/direct/01/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Sea1-F659WFHpwSPE0u0004e968>