Date: Mon, 17 Jul 2006 10:51:50 -0400 From: Mike Tancsa <mike@sentex.net> To: Johan =?iso-8859-1?Q?Str=F6m?= <johan@stromnet.org>, freebsd-stable@freebsd.org Subject: Re: ATA problems again ... Message-ID: <6.2.3.4.0.20060717104757.051cc068@64.7.153.2> In-Reply-To: <4AD53F0E-4CDA-4D20-82A4-A248FC541184@stromnet.org> References: <DAFCD4DC-D2D4-4574-ACBF-367D642D9729@stromnet.org> <8D08DDB6-6AC1-45B6-B2CE-08782F54968A@stromnet.org> <884C01BC-3E97-46EC-AA8B-E70C3931F3A4@stromnet.org> <36895211-2796-4213-B336-6279AB3AC3CB@stromnet.org> <20060713132357.Y61840@fledge.watson.org> <44B7EA39.4060509@quip.cz> <6.2.3.4.0.20060716185019.12a29240@64.7.153.2> <4AD53F0E-4CDA-4D20-82A4-A248FC541184@stromnet.org>
next in thread | previous in thread | raw e-mail | index | archive | help
At 05:59 AM 17/07/2006, Johan Str=F6m wrote:
>On 17 jul 2006, at 00.53, Mike Tancsa wrote:
>
>>At 03:02 PM 14/07/2006, Miroslav Lachman wrote:
>>
>>
>>>After reboot (command reboot), system boot up with both disks
>>>attached and start autosynchronization. I do not know, if this is
>>>hw or sw error, I got
>>
>>Install the smartmontools from
>>
>>/usr/ports/sysutils/smartmontools/
>>
>>and post the output of
>>smartctl -a /dev/ad8
>
>I tried this on my SATA disk ad6:
>=3D=3D=3D START OF INFORMATION SECTION =3D=3D=3D
>Model Family: Maxtor MaXLine III family
>Device Model: Maxtor 7L300S0
>Serial Number: L60CJKPH
>Firmware Version: BANC1G10
>User Capacity: 300,090,728,448 bytes
>Device is: In smartctl database [for details use: -P show]
>ATA Version is: 7
>ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0
>Local Time is: Mon Jul 17 11:54:35 2006 CEST
>SMART support is: Available - device has SMART capability.
>SMART support is: Enabled
>....
>SMART Error Log Version: 1
>No Errors Logged
>
>Any other output from smartctl that can help? Both my ad4 and ad6 are
>the same.
This at least rules out the disks being bad for=20
the most part. It still could be bad cables, but=20
if you changed those out than its=20
doubtful. Perhaps try updating to RELENG_6 ? If=20
its a gmirror issue, I think there have been a number of fixes.
---Mike=20
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6.2.3.4.0.20060717104757.051cc068>