Date: Wed, 11 Feb 1998 12:55:18 +0100 (MET) From: Søren Schmidt <sos@FreeBSD.ORG> To: dburr@POBoxes.com (Donald Burr) Cc: freebsd-questions@FreeBSD.ORG, freebsd-hardware@FreeBSD.ORG Subject: Re: FreeBSD and Maxtor DiamondMax UltraDMA33 (Mode 2) drive? Message-ID: <199802111155.MAA25580@sos.freebsd.dk> In-Reply-To: <XFMail.980211020713.dburr@POBoxes.com> from Donald Burr at "Feb 11, 98 02:03:05 am"
next in thread | previous in thread | raw e-mail | index | archive | help
There should be no problems at all, in fact I run two Maxtor DiamondMax 4.3G drives in DMA mode, no problems. I'd say your disk is dying, I have allready had two 4.0G Maxtor die this way.... In reply to Donald Burr who wrote: > Is there any problems with using FreeBSD with UltraDMA 33 (UDMA mode 2) > EIDE disks? Or should they work fine? > > Specifically, are there any caveats about running FreeBSD on a Maxtor > DiamondMax 3.2 GB EIDE drive that's UltraDMA33 (Mode 2)? Or should it > work OK? > > wdc0 at 0x1f0-0x1f7 irq 14 flags 0x80ff on isa > wdc0: unit 0 (wd0): <Maxtor 83240D3>, 32-bit, multi-block-16 > wd0: 3090MB (6328665 sectors), 6697 cyls, 15 heads, 63 S/T, 512 B/S > > (My motherboard is supports UDMA; I see it print that out in the BIOS > messages) > > The reason why I ask is that I've started getting some strange errors > popping up. They always occur when the system is moderately to heavily > loaded (i.e. some swapping is going on). > > wd0a: soft error reading fsbn 17955 of 17952-17967 (wd0 bn 17955; cn 1 tn > 30 sn 0)wd0: status 58<rdy,seekdone,drq> error 10<no_id> > wd0a: soft error reading fsbn 12130 of 12128-12143 (wd0 bn 12130; cn 0 tn > 192 sn 34)wd0: status 58<rdy,seekdone,drq> error 10<no_id> > wd0: interrupt timeout: > wd0: status 50<rdy,seekdone> error 10<no_id> > wd0: interrupt timeout: > wd0: status 50<rdy,seekdone> error 0 > wd0s1b: soft error reading fsbn 17133 of 17120-17135 (wd0s1 bn 221933; cn > 13 tn > 207 sn 47)wd0: status 58<rdy,seekdone,drq> error 10<no_id> > wd0: interrupt timeout: > wd0: status 50<rdy,seekdone> error 10<no_id> > wd0s1b: soft error reading fsbn 35442 of 35440-35447 (wd0s1 bn 240242; cn > 14 tn > 243 sn 23)wd0: status 58<rdy,seekdone,drq> error 10<no_id> > wd0a: soft error reading fsbn 72147 of 72144-72159 (wd0 bn 72147; cn 4 tn > 125 sn > 12)wd0: status 58<rdy,seekdone,drq> error 10<no_id> > wd0s1b: soft error reading fsbn 20811 of 20808-20823 (wd0s1 bn 225611; cn > 14 tn > 11 sn 8)wd0: status 58<rdy,seekdone,drq> error 10<no_id> > > I have 32-bit transfers and multi-sector transfers turned on in my kernel > config file, btw (if that matters). > > Any ideas? Please cc: me by email if possible. Thanks! > > --- > Donald Burr <dburr@POBoxes.com> - Ask me for my PGP key | PGP: Your > WWW HomePage: http://DonaldBurr.base.org/ ICQ #1347455 | right to > Address: P.O. Box 91212, Santa Barbara, CA 93190-1212 | 'Net privacy. > Phone: (805) 957-9666 FAX: (800) 492-5954 | USE IT. -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Søren Schmidt (sos@FreeBSD.org) FreeBSD Core Team Even more code to hack -- will it ever end .. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199802111155.MAA25580>