Date: Thu, 9 Jan 2003 17:35:47 -0500 (EST) From: "Kevin S. Brackett" <ksb@platypusgroup.com> To: mobile@freebsd.org Subject: netgear MA311 not wanting to work with ibook. Message-ID: <20030109172836.B40641@tsunami.platypusgroup.com>
next in thread | raw e-mail | index | archive | help
The card from dmesg:
wi0: <Intersil Prism2.5> mem 0xef001000-0xef001fff irq 3 at device 9.0 on
pci0
wi0: 802.11 address: 00:09:5b:12:09:8f
wi0: using RF:PRISM2.5 MAC:ISL3874A(Mini-PCI)
wi0: Intersil Firmware: Primary 1.00.07, Station 1.03.06
This is what i'm using to get it going:
/sbin/sysctl net.link.ether.bridge=1
/sbin/sysctl net.link.ether.bridge_cfg="wi0 xl0"
/sbin/sysctl net.inet.ip.forwarding=1
/sbin/ifconfig wi0 ssid ABYSS mediaopt hostap debug up
ifconfig:
xl0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
options=3<RXCSUM,TXCSUM>
inet 192.168.0.1 netmask 0xffffff00 broadcast 192.168.0.255
inet6 fe80::201:2ff:fe29:411d%xl0 prefixlen 64 scopeid 0x1
ether 00:01:02:29:41:1d
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
wi0: flags=8947<UP,BROADCAST,DEBUG,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu
1500
inet6 fe80::209:5bff:fe12:98f%wi0 prefixlen 64 scopeid 0x2
ether 00:09:5b:12:09:8f
media: IEEE 802.11 Wireless Ethernet autoselect <hostap> (DS/2Mbps
<host
ap>)
status: associated
ssid ABYSS 1:ABYSS
stationname "FreeBSD WaveLAN/IEEE node"
channel 3 authmode OPEN powersavemode OFF powersavesleep 100
wepmode OFF weptxkey 1
Debugging information:
wihap_shutdown: sc=0xc3e8c000 whi=0xc3e8d06c
wihap_init: sc=0xc3e8c000 whi=0xc3e8d06c
wihap_shutdown: sc=0xc3e8c000 whi=0xc3e8d06c
wihap_init: sc=0xc3e8c000 whi=0xc3e8d06c
wi_start: dropping unassoc dst 00:60:b0:a2:9a:27
wihap_mgmt_input: len=6 MGMT: auth:
wihap_auth_req: station 00:30:65:0a:8a:b7 algo=0x0 seq=0x1
wihap_auth_req: new station
wihap_auth_req: returns status=0x0
wihap_mgmt_input: len=17 MGMT: assoc req:
wihap_assoc_req: from station 00:30:65:0a:8a:b7
wihap_assoc_req: returns status=0x0
Using 5.0-CURRENT from a few weeks ago; here's something odd... i have the
ibook set to use DHCP, and the hostap gateway is running isc-dhcpd, and
the ibook is getting the DHCP information and the ibooks signal bar is
about 90% full.
any ideas?
TIA
- kevin
PS: please CC: replies :)
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030109172836.B40641>