Date: Mon, 1 Dec 2008 00:36:21 +0100 From: "Oliver Pinter" <oliver.pntr@gmail.com> To: freebsd-current@freebsd.org Subject: freebsd current @ 20081201 Message-ID: <6101e8c40811301536g7229841cx741cafcfcce4df69@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
LOR error on amd64
[-- Attachment #2 --]
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-CURRENT #1: Sun Nov 30 23:51:03 CET 2008
root@oliverp.teteny.bme.hu:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Quad CPU Q9300 @ 2.50GHz (2499.73-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x10677 Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x8e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
Cores per package: 4
usable memory = 4278812672 (4080 MB)
avail memory = 4115570688 (3924 MB)
ACPI APIC Table: <A_M_I_ OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.10.5.10 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133, RF2425, RF2417)
acpi0: <A_M_I_ OEMXSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, cff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem 0xd0000000-0xdfffffff,0xfe9e0000-0xfe9effff irq 16 at device 0.0 on pci1
hdac0: <ATI (Unknown) High Definition Audio Controller> mem 0xfe9fc000-0xfe9fffff irq 17 at device 0.1 on pci1
hdac0: HDA Driver Revision: 20081123_0118
hdac0: [ITHREAD]
uhci0: <UHCI (generic) USB controller> port 0xb800-0xb81f irq 16 at device 26.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xb880-0xb89f irq 21 at device 26.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xbc00-0xbc1f irq 18 at device 26.2 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe8ffc00-0xfe8fffff irq 18 at device 26.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <EHCI (generic) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 6 ports with 6 removable, self powered
hdac1: <Intel 82801J High Definition Audio Controller> mem 0xfe8f8000-0xfe8fbfff irq 22 at device 27.0 on pci0
hdac1: HDA Driver Revision: 20081123_0118
hdac1: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci3: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pci2: <ACPI PCI bus> on pcib3
mskc0: <Marvell Yukon 88E8056 Gigabit Ethernet> port 0xd800-0xd8ff mem 0xfeafc000-0xfeafffff irq 17 at device 0.0 on pci2
msk0: <Marvell Technology Group Ltd. Yukon EC Ultra Id 0xb4 Rev 0x03> on mskc0
msk0: Ethernet address: 00:22:15:12:61:50
miibus0: <MII bus> on msk0
e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
mskc0: [FILTER]
uhci3: <UHCI (generic) USB controller> port 0xb080-0xb09f irq 23 at device 29.0 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: <UHCI (generic) USB controller> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <UHCI (generic) USB controller> port 0xb400-0xb41f irq 19 at device 29.1 on pci0
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <UHCI (generic) USB controller> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
uhci5: <UHCI (generic) USB controller> port 0xb480-0xb49f irq 18 at device 29.2 on pci0
uhci5: [GIANT-LOCKED]
uhci5: [ITHREAD]
usb6: <UHCI (generic) USB controller> on uhci5
usb6: USB revision 1.0
uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
uhub6: 2 ports with 2 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe8ff800-0xfe8ffbff irq 23 at device 29.7 on pci0
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb7: EHCI version 1.0
usb7: companion controllers, 2 ports each: usb4 usb5 usb6
usb7: <EHCI (generic) USB 2.0 controller> on ehci1
usb7: USB revision 2.0
uhub7: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7
uhub7: 6 ports with 6 removable, self powered
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
skc0: <Marvell Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfebfc000-0xfebfffff irq 18 at device 2.0 on pci4
skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9)
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: Ethernet address: 00:22:15:15:17:43
miibus1: <MII bus> on sk0
e1000phy1: <Marvell 88E1011 Gigabit PHY> PHY 0 on miibus1
e1000phy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
skc0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel AHCI controller> port 0xac00-0xac07,0xa880-0xa883,0xa800-0xa807,0xa480-0xa483,0xa400-0xa41f mem 0xfe8fe800-0xfe8fefff irq 19 at device 31.2 on pci0
atapci0: [ITHREAD]
atapci0: AHCI Version 01.20 controller with 6 ports PM supported
ata2: <ATA channel 0> on atapci0
ata2: executing CLO failed
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: executing CLO failed
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: executing CLO failed
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci0
ata5: [ITHREAD]
ata6: <ATA channel 4> on atapci0
ata6: [ITHREAD]
ata7: <ATA channel 5> on atapci0
ata7: executing CLO failed
ata7: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 61a472106004721
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
cpu2: <ACPI CPU> on acpi0
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
cpu3: <ACPI CPU> on acpi0
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 61a472106004721
device_attach: est3 attach returned 6
p4tcc3: <CPU Frequency Thermal Control> on cpu3
orm0: <ISA Option ROM> at iomem 0xc0000-0xcf7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: cannot reserve I/O port range
ukbd0: <Logitech USB Receiver, class 0/0, rev 1.10/38.10, addr 2> on uhub4
kbd2 at ukbd0
ums0: <Logitech USB Receiver, class 0/0, rev 1.10/38.10, addr 2> on uhub4
ums0: 8 buttons and Z dir.
Timecounters tick every 1.000 msec
ad4: 476940MB <Hitachi HDP725050GLA360 GM4OA52A> at ata2-master SATA300
ad6: 476940MB <Hitachi HDP725050GLA360 GM4OA52A> at ata3-master SATA300
ad8: 476940MB <Hitachi HDP725050GLA360 GM4OA52A> at ata4-master SATA300
acd0: DVDR <TSSTcorp CDDVDW SH-S203D/SB00> at ata7-master SATA150
hdac0: HDA Codec #0: ATI (Unknown)
pcm0: <HDA ATI (Unknown) PCM #0 Digital> at cad 0 nid 1 on hdac0
hdac1: HDA Codec #0: Analog Devices (Unknown)
pcm1: <HDA Analog Devices (Unknown) PCM #0 Analog> at cad 0 nid 1 on hdac1
pcm2: <HDA Analog Devices (Unknown) PCM #1 Analog> at cad 0 nid 1 on hdac1
pcm3: <HDA Analog Devices (Unknown) PCM #2 Digital> at cad 0 nid 1 on hdac1
pcm4: <HDA Analog Devices (Unknown) PCM #3 Digital> at cad 0 nid 1 on hdac1
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from ufs:/dev/ad6s1a
lock order reversal:
1st 0xffffff0001502070 user map (user map) @ /usr/src/sys/vm/vm_map.c:3115
2nd 0xffffff0005b1a7f8 ufs (ufs) @ /usr/src/sys/kern/vfs_subr.c:2079
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2a
_witness_debugger() at _witness_debugger+0x49
witness_checkorder() at witness_checkorder+0x7e6
__lockmgr_args() at __lockmgr_args+0xca6
ffs_lock() at ffs_lock+0x8c
VOP_LOCK1_APV() at VOP_LOCK1_APV+0x9b
_vn_lock() at _vn_lock+0x50
vget() at vget+0x81
vnode_pager_lock() at vnode_pager_lock+0x1d1
vm_fault() at vm_fault+0x22f
trap_pfault() at trap_pfault+0x103
trap() at trap+0x51c
calltrap() at calltrap+0x8
--- trap 0xc, rip = 0x40014f, rsp = 0x7fffffffee70, rbp = 0x7fffffffee90 ---
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based forwarding disabled, default to deny, logging disabled
lock order reversal:
1st 0xffffff0005e48048 filedesc structure (filedesc structure) @ /usr/src/sys/kern/kern_descrip.c:1076
2nd 0xffffff000983f098 ufs (ufs) @ /usr/src/sys/kern/vfs_subr.c:4065
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2a
_witness_debugger() at _witness_debugger+0x49
witness_checkorder() at witness_checkorder+0x7e6
__lockmgr_args() at __lockmgr_args+0xc59
ffs_lock() at ffs_lock+0x8c
VOP_LOCK1_APV() at VOP_LOCK1_APV+0x9b
_vn_lock() at _vn_lock+0x50
knlist_remove_kq() at knlist_remove_kq+0x71
knote_fdclose() at knote_fdclose+0x16a
kern_close() at kern_close+0xd1
syscall() at syscall+0x1bf
Xfast_syscall() at Xfast_syscall+0xab
--- syscall (6, FreeBSD ELF64, close), rip = 0x800e2adac, rsp = 0x7fffffffe748, rbp = 0x7fffffffe780 ---
lock order reversal:
1st 0xfffffffe9282c280 bufwait (bufwait) @ /usr/src/sys/kern/vfs_bio.c:2443
2nd 0xffffff0005f9bc00 dirhash (dirhash) @ /usr/src/sys/ufs/ufs/ufs_dirhash.c:263
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2a
_witness_debugger() at _witness_debugger+0x49
witness_checkorder() at witness_checkorder+0x7e6
_sx_xlock() at _sx_xlock+0x44
ufsdirhash_acquire() at ufsdirhash_acquire+0x29
ufsdirhash_add() at ufsdirhash_add+0x19
ufs_direnter() at ufs_direnter+0x87a
ufs_makeinode() at ufs_makeinode+0x334
VOP_CREATE_APV() at VOP_CREATE_APV+0x8d
vn_open_cred() at vn_open_cred+0x3d5
kern_openat() at kern_openat+0x159
syscall() at syscall+0x1bf
Xfast_syscall() at Xfast_syscall+0xab
--- syscall (5, FreeBSD ELF64, open), rip = 0x803caeecc, rsp = 0x7fffffffcc68, rbp = 0x805020cb3 ---
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6101e8c40811301536g7229841cx741cafcfcce4df69>