Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 24 Jun 2003 17:01:55 -0700
From:      Shawn Ramsey <shawn@cpl.net>
To:        Karl Pielorz <kpielorz@tdx.co.uk>
Cc:        freebsd-questions@freebsd.org
Subject:   Re: Network Performace
Message-ID:  <20030624170155.A46097@cpl.net>
In-Reply-To: <512328439.1056443294@Study.tdx.com>; from kpielorz@tdx.co.uk on Tue, Jun 24, 2003 at 08:28:14AM %2B0100
References:  <009701c339ed$b89daf40$85dd75d8@shawn> <512328439.1056443294@Study.tdx.com>

next in thread | previous in thread | raw e-mail | index | archive | help

> > with unused USB and onboard NIC which is also not used. Should I be able
> > to push more than 100Mb sec with such a system? It is not doing anything
> > else, no NAT, one IPFW rule. OS is FreeBSD 4.7-RELEASE.
> 
> All depends how big the packets are etc. - 90% interrupt time is fairly 
> typical of x86/PC kit shoveling lots of small packets.
> 
> Try looking into FreeBSD's "polling" mode - i.e. interrupt free Network 
> cards. If your shifting a lot of small packets (such as online gaming stuff 
> etc.) - you may find your milage pretty limited using standard PC kit - as 
> the x86 architecture wasn't really designed for shifting lots of small 
> packets around [as I've seen many a time in the past :(]

This router is routing 99% NNTP traffic, so I wouldn't think small packet
size would be it. I tried polling, and its greatly increased the amount of
"idle CPU", and Interupt is around 20% now... But something is still very
wrong performance wise. It has helped, but I still can't push in/out nearly
100Mb/sec. (100Mb in, 100Mb out I mean). A simple FTP transfer locally
through the routers gigabit interface causes our internet performance to
plummet. I've disabled all the onboard stuff that was sharing IRQs with PCI
cards, but I didn't figure that was an issue, didn't make a difference either way.
Would the fact the gigabit is on the same PCI bus have any bearing? I would
expect to at least get 100BT performance even so, but I don't have any
experience with gigabit ethernet...



 



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030624170155.A46097>