Date: Mon, 9 Nov 2015 22:40:38 +0700 From: Eugene Grosbein <eugen@grosbein.net> To: Adrian Chadd <adrian@freebsd.org> Cc: "freebsd-mips@freebsd.org" <freebsd-mips@freebsd.org> Subject: Re: CPU underload Message-ID: <5640BE76.4000804@grosbein.net> In-Reply-To: <CAJ-Vmon=GwJhUaoS=AH5iOzEAdUUEcCz9%2BW6jdPq3h1TyXZ_3A@mail.gmail.com> References: <56348063.3090508@grosbein.net> <563500FC.8020201@grosbein.net> <CAJ-Vmo=EpmG6OJxq_v_mqKMF48h_B3K7vKqnnaKAi3x1s-uaWQ@mail.gmail.com> <5635148B.2070307@grosbein.net> <CAJ-VmomzkG8ZB0h1Qc=Oeny2ZOzQg1UirUprM_gmMy64F5ZRYw@mail.gmail.com> <56351AA6.80903@grosbein.net> <CAJ-VmomLen5p7ELejU7QtC5CO2j8hydb_CvdOqQsfaaMAtmdkA@mail.gmail.com> <563523CA.3040207@grosbein.net> <CAJ-Vmonpd8R5C%2BNvhOGFD1okkkit990DV8c4Dm%2BLmpZ2uFfVkA@mail.gmail.com> <56367686.4090801@grosbein.net> <CAJ-VmomtJ9eKfAJYfn4e2S1xWN8-YHo0M0KH-9V=VjNBf6vVVA@mail.gmail.com> <563707A0.3040700@grosbein.net> <CANCZdfrB0hkjmTU-9NzimBv=X_h-=bF0D2azBxg=9B=kmitv7Q@mail.gmail.com> <56370E1D.3040801@grosbein.net> <CAJ-Vmo=0vOAq8db_GeLWmdXr7xJdzUh44ZZJrQ9vVdpvzT9hiQ@mail.gmail.com> <563F5630.2000407@grosbein.net> <CAJ-Vmon8_kHeg3FOzK6T8amzF=-0ia0-Hb1ve2zZoEdgxrHO8g@mail.gmail.com> <563F938B.3070707@grosbein.net> <CAJ-Vmon=GwJhUaoS=AH5iOzEAdUUEcCz9%2BW6jdPq3h1TyXZ_3A@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 09.11.2015 02:23, Adrian Chadd wrote: >>> Which MIPS kernel config doesn't have USB_HOST_ALIGN=64 ? >> >> sys/mips/conf/AR934X_BASE has USB_HOST_ALIGN=32 > ok, what's the l1 cache size reported at boot up? > > I think I may just bump them all to 64. That is TL-WDR3600, here is start of boot log: U-Boot 1.1.4 (Jun 5 2015 - 14:14:34) U-boot DB120 DRAM: 128 MB id read 0x100000ff flash size 8MB, sector count = 128 Flash: 8 MB Using default environment PCIe Reset OK!!!!!! In: serial Out: serial Err: serial Net: ag934x_enet_initialize... No valid address in Flash. Using fixed address wasp reset mask:c03300 WASP ----> S17 PHY * : cfg1 0x7 cfg2 0x7114 eth0: ba:be:fa:ce:08:41 athrs17_reg_init: complete eth0 up eth0 Autobooting in 1 seconds ## Booting image at 9f020000 ... Uncompressing Kernel Image ... OK Starting kernel ... CPU platform: Atheros AR9344 rev 2 CPU Frequency=560 MHz CPU DDR Frequency=450 MHz CPU platform: Atheros AR9344 rev 2 CPU Frequency=560 MHz CPU DDR Frequency=450 MHz CPU AHB Frequency=225 MHz platform frequency: 560 MHz CPU reference clock: 40 MHz CPU MDIO clock: 100 MHz arguments: a0 = 00000007 a1 = a7f8ffb0 a2 = 08000000 a3 = 00000008 Cmd line:argv is invalid Environment: envp is invalid Cache info: picache_stride = 4096 picache_loopcount = 16 pdcache_stride = 4096 pdcache_loopcount = 8 cpu0: MIPS Technologies processor v76.151 MMU: Standard TLB, 32 entries L1 i-cache: 4 ways of 512 sets, 32 bytes per line L1 d-cache: 4 ways of 256 sets, 32 bytes per line Config1=0xbee3519e<PerfCount,WatchRegs,MIPS16,EJTAG> Config3=0x2c20 Physical memory chunk(s): 0x47c000 - 0x7ffffff, 129515520 bytes (31620 pages) Maxmem is 0x8000000
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5640BE76.4000804>