Date: Mon, 18 Dec 2000 22:31:56 -0800 From: Shon Elliott <masa@misproductions.com> To: Questions FreeBSD <freebsd-questions@FreeBSD.ORG> Subject: network card choked, dropping packets..?? Message-ID: <3A3F00DC.285C2833@misproductions.com>
next in thread | raw e-mail | index | archive | help
I get this in /var/log/messages
Dec 18 19:48:44 www /kernel: xl0: no memory for rx list -- packet
dropped!
What do I do to fix this problem? Also, the machine locks up when
booting the SMP kernel.
Keep in mind this is a dual pentium 3 800 system.
The machine has 256M of RAM. dmesg follows:
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD 4.2-STABLE #0: Sat Dec 9 21:30:44 PST 2000
root@www.x.com:/usr/obj/usr/src/sys/KERNELv1
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (801.83-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 536805376 (524224K bytes)
config> en sio0
config> po sio0 0x3f8
config> ir sio0 4
config> f sio0 0x10
config> q
avail memory = 519368704 (507196K bytes)
Preloaded elf kernel "kernel" at 0xc032e000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc032e09c.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0
on pci0
pci1: <PCI bus> on pcib2
isab0: <VIA 82C596B PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C596 ATA66 controller> port 0xc000-0xc00f at device 7.1
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 10 at device
7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
xl0: <3Com 3cSOHO100-TX OfficeConnect> port 0xc800-0xc87f mem
0xd6020000-0xd602007f irq 10 at device 15.0 on pci0
xl0: Ethernet address: 00:01:02:c6:28:dd
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atapci1: <Promise ATA100 controller> port
0xdc00-0xdc3f,0xd800-0xd803,0xd400-0xd407,0xd000-0xd003,0xcc00-0xcc07
mem 0xd6000000-0xd601ffff irq 11 at device 16.0 on pci0
ata2: at 0xcc00 on atapci1
ata3: at 0xd400 on atapci1
pci0: <ATI Mach64-GT graphics accelerator> at 17.0
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 drq 0 flags 0x10 on isa0
sio0: type 16550A, console
ad0: 29314MB <IBM-DTLA-307030> [59560/16/63] at ata0-master UDMA66
ad4: 29314MB <IBM-DTLA-307030> [59560/16/63] at ata2-master UDMA100
ad6: 29314MB <IBM-DTLA-307030> [59560/16/63] at ata3-master UDMA100
acd0: CDROM <ATAPI CDROM> at ata1-master using UDMA33
Mounting root from ufs:/dev/ad0s1a
Shon
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3A3F00DC.285C2833>