Date: Fri, 10 Dec 2004 16:46:11 GMT From: Dmitry <devteev@it.ru> To: freebsd-gnats-submit@FreeBSD.org Subject: kern/74920: 3Com 3C509-Combo Etherlink III Message-ID: <200412101646.iBAGkBLh015889@www.freebsd.org> Resent-Message-ID: <200412101650.iBAGoPt7092397@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 74920
>Category: kern
>Synopsis: 3Com 3C509-Combo Etherlink III
>Confidential: no
>Severity: non-critical
>Priority: low
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Fri Dec 10 16:50:25 GMT 2004
>Closed-Date:
>Last-Modified:
>Originator: Dmitry
>Release: 5.3
>Organization:
IT
>Environment:
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-RELEASE #2: Thu Jan 4 04:04:02 CET 1996
root@:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium/P55C (233.86-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x543 Stepping = 3
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 67108864 (64 MB)
avail memory = 56082432 (53 MB)
Intel Pentium detected, installing workaround for F00F bug
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 WDMA2 controller> port 0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
uhci0: <Intel 82371SB (PIIX3) USB controller> port 0x6000-0x601f irq 11 at device 7.2 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82371SB (PIIX3) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
rl0: <RealTek 8139 10/100BaseTX> port 0x6100-0x61ff mem 0xe4001000-0xe40010ff irq 12 at device 17.0 on pci0
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 4c:00:10:53:7a:26
rl1: <RealTek 8139 10/100BaseTX> port 0x6200-0x62ff mem 0xe4000000-0xe40000ff irq 9 at device 18.0 on pci0
miibus1: <MII bus> on rl1
rlphy1: <RealTek internal media interface> on miibus1
rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl1: Ethernet address: 4c:00:10:53:97:a0
pci0: <display, VGA> at device 20.0 (no driver attached)
cpu0 on motherboard
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
pmtimer0 on isa0
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0400> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
Timecounter "TSC" frequency 233864549 Hz quality 800
Timecounters tick every 10.000 msec
ad0: 76319MB <WDC WD800JB-00JJA0/05.01C05> [155061/16/63] at ata0-master WDMA2
acd0: CDROM <TEAC CD-552E/VER 1.00> at ata1-slave WDMA2
Mounting root from ufs:/dev/ad0s1a
>Description:
At loading system when in ISA a socket the network card 3Com 3C509-Combo Etherlink III system is inserted is reloaded after the message:
ormo:<ISA Option ROM> at iomem 0xC0000-0xC7FFF on isa0 pmtimero on isa0
ep0:<3Com 3C509-Combo Etherlink III> at port 0x300-0x30f irq 10 on isa0
ep0: eeprom failed to come ready
ep0:ep-alloc() failed!(6)
panic: resource_list_release: resource entry is not busy
>How-To-Repeat:
boot system
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200412101646.iBAGkBLh015889>