Date: Fri, 2 Oct 2009 18:58:10 -0700 From: Ted Faber <faber@isi.edu> To: Sean Bruno <sean.bruno@dsl-only.net> Cc: freebsd-current@freebsd.org Subject: Re: FreeBSD8-RELENG (sources from this morning) deadlock Message-ID: <20091003015810.GA1661@zod.isi.edu> In-Reply-To: <1254522745.2549.6.camel@Lappy> References: <20090929041407.GA92280@zod.isi.edu> <20091002213116.GH88191@zod.isi.edu> <1254521690.2549.5.camel@Lappy> <20091002222753.GI88191@zod.isi.edu> <1254522745.2549.6.camel@Lappy>
next in thread | previous in thread | raw e-mail | index | archive | help
--3uo+9/B/ebqu+fSQ Content-Type: multipart/mixed; boundary="BOKacYhQ+x31HxR3" Content-Disposition: inline --BOKacYhQ+x31HxR3 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Fri, Oct 02, 2009 at 03:32:25PM -0700, Sean Bruno wrote: > No sweat. I'll hook up a test box at my house too. >=20 > What architecture(amd64, i386, sparc) are both of these machines? >=20 > Sean >=20 > On Fri, 2009-10-02 at 15:27 -0700, Ted Faber wrote: > > On Fri, Oct 02, 2009 at 03:14:50PM -0700, Sean Bruno wrote: > > >=20 > > > > I'm still deadlocked, but trying to get more info. I tried a firew= ire > > > > debugging session using dcons, but that failed for reasons unclear. > > > > dconschat seems to do the right thing: > > > >=20 > > > I'm a bit confused by the dmesg output of the machine. If I read it > > > right, firewire/fwohci isn't loaded in the dmesg output. =20 > > >=20 > > > Am I missing something? > >=20 > > Crap. That was the dmesg from the original message.=20 > >=20 > > There's a certain amount of switching of power supplies and other pain > > involved in trying to get this board running while not leaving the > > machine I'm replacing it with down for the count. In the confusion I > > grabbed the wrong dmesg. Here are the dmesg -v's from booting the two nodes. The cable is not between them during boot; it's kind of difficult to get to the consoles and boot the nodes at the same time given my HW setup.. The output from is in the dconschat output. The debugging goes from the musicbox machine to ylum. It is ylum that experiences the deadlock. --=20 Ted Faber http://www.isi.edu/~faber PGP: http://www.isi.edu/~faber/pubkeys.= asc Unexpected attachment on this mail? See http://www.isi.edu/~faber/FAQ.html#= SIG --BOKacYhQ+x31HxR3 Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="mb.dmesg.boot" Content-Transfer-Encoding: quoted-printable Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-RC1 #2: Thu Oct 1 20:02:02 PDT 2009 root@musicbox.lunabase.org:/usr/obj/usr/src/sys/GENERIC module_register: module re/miibus already exists! Module re/miibus failed to register: 17 module_register: module pci/re already exists! Module pci/re failed to register: 17 Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Atom(TM) CPU 230 @ 1.60GHz (1599.29-MHz 686-class CPU) Origin =3D "GenuineIntel" Id =3D 0x106c2 Stepping =3D 2 Features=3D0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG= E,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=3D0x40e31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM,<b22= >> AMD Features=3D0x20100000<NX,LM> AMD Features2=3D0x1<LAHF> TSC: P-state invariant real memory =3D 2147483648 (2048 MB) avail memory =3D 2081087488 (1984 MB) ACPI APIC Table: <INTEL D945GLF > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 1 core(s) x 2 HTT threads cpu0 (BSP): APIC ID: 0 cpu1 (AP/HT): APIC ID: 1 ioapic0: Changing APIC ID to 2 ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 acpi0: <INTEL D945GLF> on motherboard acpi0: [ITHREAD] acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_button0: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0x30e0-0x30e7 mem 0x90300000-0x9037f= fff,0x80000000-0x8fffffff,0x90380000-0x903bffff irq 16 at device 2.0 on pci0 agp0: <Intel 82945G (945G GMCH) SVGA controller> on vgapci0 agp0: detected 7932k stolen memory agp0: aperture size is 256M hdac0: <Intel 82801G High Definition Audio Controller> mem 0x903c0000-0x903= c3fff irq 22 at device 27.0 on pci0 hdac0: HDA Driver Revision: 20090624_0136 hdac0: [ITHREAD] pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0 pci1: <ACPI PCI bus> on pcib1 re0: <RealTek 8101E/8102E/8102EL PCIe 10/100baseTX> port 0x2000-0x20ff mem = 0x90200000-0x90200fff,0x90000000-0x9000ffff irq 16 at device 0.0 on pci1 re0: Using 1 MSI messages re0: Chip rev. 0x24800000 re0: MAC rev. 0x00000000 miibus0: <MII bus> on re0 rlphy0: <RTL8201L 10/100 media interface> PHY 1 on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto re0: Ethernet address: 00:1c:c0:6f:82:1a re0: [FILTER] pcib2: <ACPI PCI-PCI bridge> at device 28.2 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 28.3 on pci0 pci3: <ACPI PCI bus> on pcib3 uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0x3080-0x309f irq 23= at device 29.0 on pci0 uhci0: [ITHREAD] uhci0: LegSup =3D 0x0f10 usbus0: <Intel 82801G (ICH7) USB controller USB-A> on uhci0 uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0x3060-0x307f irq 19= at device 29.1 on pci0 uhci1: [ITHREAD] uhci1: LegSup =3D 0x0f10 usbus1: <Intel 82801G (ICH7) USB controller USB-B> on uhci1 uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0x3040-0x305f irq 18= at device 29.2 on pci0 uhci2: [ITHREAD] uhci2: LegSup =3D 0x0f10 usbus2: <Intel 82801G (ICH7) USB controller USB-C> on uhci2 uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0x3020-0x303f irq 16= at device 29.3 on pci0 uhci3: [ITHREAD] uhci3: LegSup =3D 0x0f10 usbus3: <Intel 82801G (ICH7) USB controller USB-D> on uhci3 ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0x903c4000-0x903c43f= f irq 23 at device 29.7 on pci0 ehci0: [ITHREAD] usbus4: EHCI version 1.0 usbus4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0 pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci4: <ACPI PCI bus> on pcib4 uhci4: <VIA 83C572 USB controller> port 0x1020-0x103f irq 21 at device 0.0 = on pci4 uhci4: [ITHREAD] usbus5: <VIA 83C572 USB controller> on uhci4 uhci5: <VIA 83C572 USB controller> port 0x1000-0x101f irq 22 at device 0.1 = on pci4 uhci5: [ITHREAD] usbus6: <VIA 83C572 USB controller> on uhci5 ehci1: <VIA VT6202 USB 2.0 controller> mem 0x90101000-0x901010ff irq 23 at = device 0.2 on pci4 ehci1: [ITHREAD] usbus7: EHCI version 1.0 usbus7: <VIA VT6202 USB 2.0 controller> on ehci1 fwohci0: <NEC uPD72873> mem 0x90100000-0x90100fff irq 21 at device 0.3 on p= ci4 fwohci0: [ITHREAD] fwohci0: OHCI version 1.10 (ROM=3D1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:00:4c:01:07:00:67:c4 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 dcons_crom0: <dcons configuration ROM> on firewire0 dcons_crom0: bus_addr 0xd74740 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:00:4c:00:67:c4 fwe0: Ethernet address: 02:00:4c:00:67:c4 fwip0: <IP over FireWire> on firewire0 fwip0: Firewire address: 00:00:4c:01:07:00:67:c4 @ 0xfffe00000000, S400, ma= xrec 2048 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: fwohci_intr_core: BUS reset fwohci0: fwohci_intr_core: node_id=3D0x00000001, SelfID Count=3D1, CYCLEMAS= TER mode isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177= ,0x376,0x30b0-0x30bf irq 18 at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata0: [ITHREAD] atapci1: <Intel ICH7 SATA300 controller> port 0x30c8-0x30cf,0x30ec-0x30ef,0= x30c0-0x30c7,0x30e8-0x30eb,0x30a0-0x30af irq 19 at device 31.2 on pci0 atapci1: [ITHREAD] ata2: <ATA channel 0> on atapci1 ata2: [ITHREAD] ata3: <ATA channel 1> on atapci1 ata3: [ITHREAD] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) atrtc0: <AT realtime clock> port 0x70-0x71,0x74-0x77 irq 8 on acpi0 ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppc0: [ITHREAD] ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 plip0: [ITHREAD] lpt0: <Printer> on ppbus0 lpt0: [ITHREAD] lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: [FILTER] uart0: console (9600,n,8,1) cpu0: <ACPI CPU> on acpi0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 cpu1: <ACPI CPU> on acpi0 p4tcc1: <CPU Frequency Thermal Control> on cpu1 pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xcb000-0xcbfff pnpid ORM0000 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] Timecounters tick every 1.000 msec firewire0: 2 nodes, maxhop <=3D 1 cable IRM irm(1) (me)=20 firewire0: bus manager 1=20 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 480Mbps High Speed USB v2.0 usbus5: 12Mbps Full Speed USB v1.0 usbus6: 12Mbps Full Speed USB v1.0 usbus7: 480Mbps High Speed USB v2.0 ad0: 476940MB <MAXTOR STM3500630A 3.AAE> at ata0-master UDMA100 ugen0.1: <Intel> at usbus0 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <Intel> at usbus2 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen3.1: <Intel> at usbus3 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen4.1: <Intel> at usbus4 uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4 ugen5.1: <VIA> at usbus5 uhub5: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 ugen6.1: <VIA> at usbus6 uhub6: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 ugen7.1: <VIA> at usbus7 uhub7: <VIA EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7 GEOM: ad0: geometry does not match label (1h,63s !=3D 16h,63s). hdac0: HDA Codec #2: Realtek ALC662 pcm0: <HDA Realtek ALC662 PCM #0 Analog> at cad 2 nid 1 on hdac0 pcm1: <HDA Realtek ALC662 PCM #1 Analog> at cad 2 nid 1 on hdac0 firewire0: New S400 device ID:00004c0100003bc7 uhub0: 2 ports with 2 removable, self powered uhub1: 2 ports with 2 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub5: 2 ports with 2 removable, self powered uhub6: 2 ports with 2 removable, self powered uhub7: 4 ports with 4 removable, self powered uhub4: 8 ports with 8 removable, self powered SMP: AP CPU #1 Launched! Trying to mount root from ufs:/dev/ad0a --BOKacYhQ+x31HxR3 Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg.boot" Content-Transfer-Encoding: quoted-printable Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 8.0-RC1 #2: Wed Sep 30 22:03:01 PDT 2009 root@ylum.lunabase.org:/usr/obj/usr/src/sys/DEBUG WARNING: WITNESS option enabled, expect reduced performance. WARNING: DIAGNOSTIC option enabled, expect reduced performance. Preloaded elf kernel "/boot/kernel/kernel" at 0xc1177000. Preloaded elf module "/boot/kernel/snd_via8233.ko" at 0xc11771d8. Preloaded elf module "/boot/kernel/sound.ko" at 0xc1177288. Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 3000121837 Hz CPU: AMD Athlon(tm) II X2 250 Processor (3000.12-MHz 686-class CPU) Origin =3D "AuthenticAMD" Id =3D 0x100f62 Stepping =3D 2 Features=3D0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG= E,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=3D0x802009<SSE3,MON,CX16,POPCNT> AMD Features=3D0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+= ,3DNow!> AMD Features2=3D0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OS= VW,IBS,SKINIT,WDT> TSC: P-state invariant Data TLB: 48 entries, fully associative Instruction TLB: 32 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associat= ive L2 internal cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 8-way associati= ve real memory =3D 8589934592 (8192 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001426000 - 0x00000000cc4cdfff, 3406462976 bytes (831656 pages) avail memory =3D 3404414976 (3246 MB) Table 'FACP' at 0xcffb0200 Table 'APIC' at 0xcffb0390 MADT: Found table at 0xcffb0390 MP Configuration Table version 1.4 found at 0xc00fc2b0 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 1: enabled SMP: Added CPU 0 (AP) MADT: Found CPU APIC ID 1 ACPI ID 2: enabled SMP: Added CPU 1 (AP) MADT: Found CPU APIC ID 130 ACPI ID 3: disabled MADT: Found CPU APIC ID 131 ACPI ID 4: disabled ACPI APIC Table: <051909 APIC2009> INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 APIC: CPU 0 has ACPI ID 1 APIC: CPU 1 has ACPI ID 2 bios32: Found BIOS32 Service Directory header at 0xc00f0000 bios32: Entry =3D 0xf0010 (c00f0010) Rev =3D 0 Len =3D 1 pcibios: PCI BIOS entry at 0xf0000+0x31 pnpbios: Found PnP BIOS data at 0xc00f4ea0 pnpbios: Entry =3D f0000:664a Rev =3D 1.0 Other BIOS signatures found: ULE: setup cpu 0 ULE: setup cpu 1 ACPI: RSDP 0xf9580 00014 (v0 ACPIAM) ACPI: RSDT 0xcffb0000 0003C (v1 051909 RSDT2009 20090519 MSFT 00000097) ACPI: FACP 0xcffb0200 00084 (v1 051909 FACP2009 20090519 MSFT 00000097) ACPI Warning: Optional field Pm2ControlBlock has zero address or length: = 0 0/1 20090521 tbfadt-655 ACPI: DSDT 0xcffb0440 0A5C4 (v1 1AAAA 1AAAA000 00000000 INTL 20051117) ACPI: FACS 0xcffbe000 00040 ACPI: APIC 0xcffb0390 0006C (v1 051909 APIC2009 20090519 MSFT 00000097) ACPI: MCFG 0xcffb0400 0003C (v1 051909 OEMMCFG 20090519 MSFT 00000097) ACPI: OEMB 0xcffbe040 00072 (v1 051909 OEMB2009 20090519 MSFT 00000097) ACPI: HPET 0xcffbaa10 00038 (v1 051909 OEMHPET 20090519 MSFT 00000097) ACPI: SSDT 0xcffbaa50 00458 (v1 A M I POWERNOW 00000001 AMD 00000001) MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0: intpin 9 polarity: low ioapic0 <Version 2.1> irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x0001000f pcm: 0x00010400 wlan: <802.11 Link Layer> snd_unit_init() u=3D0x00ff8000 [512] d=3D0x00007c00 [32] c=3D0x000003ff [10= 24] feeder_register: snd_unit=3D-1 snd_maxautovchans=3D16 latency=3D5 feeder_ra= te_min=3D1 feeder_rate_max=3D2016000 feeder_rate_round=3D25 random: <entropy source, Software, Yarrow> nfslock: pseudo-device kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> Pentium Pro MTRR support enabled io: <I/O> null: <null device, zero device> hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 npx0: INT 16 interface acpi0: <051909 RSDT2009> on motherboard PCIe: Memory Mapped configuration base @ 0xe0000000 pcibios: BIOS version 3.00 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] acpi0: Power Button (fixed) acpi0: wakeup code va 0xc6b4f000 pa 0x1000 AcpiOsDerivePciId: \\_SB_.PCI0.RS78.NB2_ -> bus 0 dev 0 func 0 AcpiOsDerivePciId: \\_SB_.PCI0.SATA.SACS -> bus 0 dev 17 func 0 acpi0: reservation of fee00000, 1000 (3) failed acpi0: reservation of ffb80000, 80000 (3) failed acpi0: reservation of fec10000, 20 (3) failed acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, cff00000 (3) failed ACPI HPET table warning: Sequence is non-zero (2) ACPI timer: 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 7 N 0 4 7 10 11 12 14 15 Validation 0 7 N 0 4 7 10 11 12 14 15 After Disable 0 255 N 0 4 7 10 11 12 14 15 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 4 7 10 11 12 14 15 Validation 0 10 N 0 4 7 10 11 12 14 15 After Disable 0 255 N 0 4 7 10 11 12 14 15 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 4 7 10 11 12 14 15 Validation 0 10 N 0 4 7 10 11 12 14 15 After Disable 0 255 N 0 4 7 10 11 12 14 15 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 4 7 10 11 12 14 15 Validation 0 11 N 0 4 7 10 11 12 14 15 After Disable 0 255 N 0 4 7 10 11 12 14 15 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 4 10 11 12 14 15 Validation 0 255 N 0 4 10 11 12 14 15 After Disable 0 255 N 0 4 10 11 12 14 15 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 4 10 11 12 14 15 Validation 0 11 N 0 4 10 11 12 14 15 After Disable 0 255 N 0 4 10 11 12 14 15 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 4 N 0 4 10 11 12 14 15 Validation 0 4 N 0 4 10 11 12 14 15 After Disable 0 255 N 0 4 10 11 12 14 15 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 4 10 11 12 14 15 Validation 0 255 N 0 4 10 11 12 14 15 After Disable 0 255 N 0 4 10 11 12 14 15 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acp= i0 acpi_hpet0: vend: 0x4353 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route Timecounter "HPET" frequency 14318180 Hz quality 900 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: domain=3D0, physical bus=3D0 found-> vendor=3D0x1022, dev=3D0x9600, revid=3D0x00 domain=3D0, bus=3D0, slot=3D0, func=3D0 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0006, statreg=3D0x2230, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x1022, dev=3D0x9602, revid=3D0x00 domain=3D0, bus=3D0, slot=3D1, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 cmdreg=3D0x0107, statreg=3D0x0230, cachelnsz=3D0 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x1a (6500 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x1022, dev=3D0x9606, revid=3D0x00 domain=3D0, bus=3D0, slot=3D6, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 cmdreg=3D0x0107, statreg=3D0x0010, cachelnsz=3D16 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x07 (1750 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D10 powerspec 3 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.6.INTA pcib0: slot 6 INTA hardwired to IRQ 18 found-> vendor=3D0x1022, dev=3D0x9607, revid=3D0x00 domain=3D0, bus=3D0, slot=3D7, func=3D0 class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 cmdreg=3D0x0107, statreg=3D0x0010, cachelnsz=3D16 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x07 (1750 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D11 powerspec 3 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.7.INTA pcib0: slot 7 INTA hardwired to IRQ 19 found-> vendor=3D0x1002, dev=3D0x4390, revid=3D0x00 domain=3D0, bus=3D0, slot=3D17, func=3D0 class=3D01-01-8f, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0107, statreg=3D0x0230, cachelnsz=3D16 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D4 powerspec 2 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0xa000, size 3, enabled map[14]: type I/O Port, range 32, base 0x9000, size 2, enabled map[18]: type I/O Port, range 32, base 0x8000, size 3, enabled map[1c]: type I/O Port, range 32, base 0x7000, size 2, enabled map[20]: type I/O Port, range 32, base 0x6000, size 4, enabled map[24]: type Memory, range 32, base 0xfe6ffc00, size 10, enabled pcib0: matched entry for 0.17.INTA pcib0: slot 17 INTA hardwired to IRQ 22 found-> vendor=3D0x1002, dev=3D0x4397, revid=3D0x00 domain=3D0, bus=3D0, slot=3D18, func=3D0 class=3D0c-03-10, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0102, statreg=3D0x02a0, cachelnsz=3D16 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D7 map[10]: type Memory, range 32, base 0xfe6fe000, size 12, enabled pcib0: matched entry for 0.18.INTA pcib0: slot 18 INTA hardwired to IRQ 16 found-> vendor=3D0x1002, dev=3D0x4398, revid=3D0x00 domain=3D0, bus=3D0, slot=3D18, func=3D1 class=3D0c-03-10, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0117, statreg=3D0x02a0, cachelnsz=3D16 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D7 map[10]: type Memory, range 32, base 0xfe6fd000, size 12, enabled pcib0: matched entry for 0.18.INTA pcib0: slot 18 INTA hardwired to IRQ 16 found-> vendor=3D0x1002, dev=3D0x4396, revid=3D0x00 domain=3D0, bus=3D0, slot=3D18, func=3D2 class=3D0c-03-20, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0102, statreg=3D0x02b0, cachelnsz=3D16 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfe6ff800, size 8, enabled pcib0: matched entry for 0.18.INTB pcib0: slot 18 INTB hardwired to IRQ 17 found-> vendor=3D0x1002, dev=3D0x4397, revid=3D0x00 domain=3D0, bus=3D0, slot=3D19, func=3D0 class=3D0c-03-10, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0102, statreg=3D0x02a0, cachelnsz=3D16 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D10 map[10]: type Memory, range 32, base 0xfe6fc000, size 12, enabled pcib0: matched entry for 0.19.INTA pcib0: slot 19 INTA hardwired to IRQ 18 found-> vendor=3D0x1002, dev=3D0x4398, revid=3D0x00 domain=3D0, bus=3D0, slot=3D19, func=3D1 class=3D0c-03-10, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0117, statreg=3D0x02a0, cachelnsz=3D16 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D10 map[10]: type Memory, range 32, base 0xfe6fb000, size 12, enabled pcib0: matched entry for 0.19.INTA pcib0: slot 19 INTA hardwired to IRQ 18 found-> vendor=3D0x1002, dev=3D0x4396, revid=3D0x00 domain=3D0, bus=3D0, slot=3D19, func=3D2 class=3D0c-03-20, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0102, statreg=3D0x02b0, cachelnsz=3D16 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfe6ff400, size 8, enabled pcib0: matched entry for 0.19.INTB pcib0: slot 19 INTB hardwired to IRQ 19 found-> vendor=3D0x1002, dev=3D0x4385, revid=3D0x3a domain=3D0, bus=3D0, slot=3D20, func=3D0 class=3D0c-05-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0403, statreg=3D0x0230, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x1002, dev=3D0x439c, revid=3D0x00 domain=3D0, bus=3D0, slot=3D20, func=3D1 class=3D01-01-8a, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0005, statreg=3D0x0230, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D255 MSI supports 2 messages map[20]: type I/O Port, range 32, base 0xff00, size 4, enabled found-> vendor=3D0x1002, dev=3D0x4383, revid=3D0x00 domain=3D0, bus=3D0, slot=3D20, func=3D2 class=3D04-03-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0006, statreg=3D0x0410, cachelnsz=3D16 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D7 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 64, base 0xfe6f4000, size 14, enabled pcib0: matched entry for 0.20.INTA pcib0: slot 20 INTA hardwired to IRQ 16 found-> vendor=3D0x1002, dev=3D0x439d, revid=3D0x00 domain=3D0, bus=3D0, slot=3D20, func=3D3 class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x000f, statreg=3D0x0220, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x1002, dev=3D0x4384, revid=3D0x00 domain=3D0, bus=3D0, slot=3D20, func=3D4 class=3D06-04-01, hdrtype=3D0x01, mfdev=3D1 cmdreg=3D0x0107, statreg=3D0x02a0, cachelnsz=3D0 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x07 (1750 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x1002, dev=3D0x4399, revid=3D0x00 domain=3D0, bus=3D0, slot=3D20, func=3D5 class=3D0c-03-10, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0102, statreg=3D0x02a0, cachelnsz=3D16 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Dc, irq=3D10 map[10]: type Memory, range 32, base 0xfe6fa000, size 12, enabled pcib0: matched entry for 0.20.INTC pcib0: slot 20 INTC hardwired to IRQ 18 found-> vendor=3D0x1022, dev=3D0x1200, revid=3D0x00 domain=3D0, bus=3D0, slot=3D24, func=3D0 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0000, statreg=3D0x0010, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x1022, dev=3D0x1201, revid=3D0x00 domain=3D0, bus=3D0, slot=3D24, func=3D1 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0000, statreg=3D0x0000, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x1022, dev=3D0x1202, revid=3D0x00 domain=3D0, bus=3D0, slot=3D24, func=3D2 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0000, statreg=3D0x0000, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x1022, dev=3D0x1203, revid=3D0x00 domain=3D0, bus=3D0, slot=3D24, func=3D3 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0000, statreg=3D0x0010, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) found-> vendor=3D0x1022, dev=3D0x1204, revid=3D0x00 domain=3D0, bus=3D0, slot=3D24, func=3D4 class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0000, statreg=3D0x0000, cachelnsz=3D0 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xb000-0xbfff pcib1: memory decode 0xfe700000-0xfe8fffff pcib1: prefetched decode 0xd0000000-0xdfffffff pci1: <ACPI PCI bus> on pcib1 pci1: domain=3D0, physical bus=3D1 found-> vendor=3D0x1002, dev=3D0x9614, revid=3D0x00 domain=3D0, bus=3D1, slot=3D5, func=3D0 class=3D03-00-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0107, statreg=3D0x4010, cachelnsz=3D16 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D10 powerspec 3 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Prefetchable Memory, range 32, base 0xd0000000, size 28, ena= bled pcib1: requested memory range 0xd0000000-0xdfffffff: good map[14]: type I/O Port, range 32, base 0xb000, size 8, enabled pcib1: requested I/O range 0xb000-0xb0ff: in range map[18]: type Memory, range 32, base 0xfe8f0000, size 16, enabled pcib1: requested memory range 0xfe8f0000-0xfe8fffff: good map[24]: type Memory, range 32, base 0xfe700000, size 20, enabled pcib1: requested memory range 0xfe700000-0xfe7fffff: good pcib1: matched entry for 1.5.INTA pcib1: slot 5 INTA hardwired to IRQ 18 found-> vendor=3D0x1002, dev=3D0x960f, revid=3D0x00 domain=3D0, bus=3D1, slot=3D5, func=3D1 class=3D04-03-00, hdrtype=3D0x00, mfdev=3D1 cmdreg=3D0x0107, statreg=3D0x4010, cachelnsz=3D16 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Db, irq=3D11 powerspec 3 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xfe8e8000, size 14, enabled pcib1: requested memory range 0xfe8e8000-0xfe8ebfff: good pcib1: matched entry for 1.5.INTB pcib1: slot 5 INTB hardwired to IRQ 19 vgapci0: <VGA-compatible display> port 0xb000-0xb0ff mem 0xd0000000-0xdffff= fff,0xfe8f0000-0xfe8fffff,0xfe700000-0xfe7fffff irq 18 at device 5.0 on pci1 pci1: <multimedia, HDA> at device 5.1 (no driver attached) pcib2: <ACPI PCI-PCI bridge> irq 18 at device 6.0 on pci0 pcib2: domain 0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xc000-0xcfff pcib2: memory decode 0xfe900000-0xfe9fffff pcib2: prefetched decode 0xfdf00000-0xfdffffff pcib2: could not get PCI interrupt routing table for \\_SB_.PCI0.PCE6 - AE_= NOT_FOUND pci2: <ACPI PCI bus> on pcib2 pci2: domain=3D0, physical bus=3D2 found-> vendor=3D0x10ec, dev=3D0x8168, revid=3D0x02 domain=3D0, bus=3D2, slot=3D0, func=3D0 class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0107, statreg=3D0x0010, cachelnsz=3D16 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D10 powerspec 3 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit MSI-X supports 2 messages in map 0x20 map[10]: type I/O Port, range 32, base 0xc800, size 8, enabled pcib2: requested I/O range 0xc800-0xc8ff: in range map[18]: type Memory, range 64, base 0xfe9ff000, size 12, enabled pcib2: requested memory range 0xfe9ff000-0xfe9fffff: good map[20]: type Prefetchable Memory, range 64, base 0xfdff0000, size 16, ena= bled pcib2: requested memory range 0xfdff0000-0xfdffffff: good pcib0: matched entry for 0.6.INTA pcib0: slot 6 INTA hardwired to IRQ 18 pcib2: slot 0 INTA is routed to irq 18 re0: <RealTek 8168/8168B/8168C/8168CP/8168D/8168DP/8111B/8111C/8111CP/8111D= P PCIe Gigabit Ethernet> port 0xc800-0xc8ff mem 0xfe9ff000-0xfe9fffff,0xfdf= f0000-0xfdffffff irq 18 at device 0.0 on pci2 re0: Reserved 0x1000 bytes for rid 0x18 type 3 at 0xfe9ff000 re0: MSI count : 1 re0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 256 to local APIC 0 vector 49 re0: using IRQ 256 for MSI re0: Using 1 MSI messages re0: Chip rev. 0x3c000000 re0: MAC rev. 0x00400000 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0 rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000ba= seT-FDX, auto re0: bpf attached re0: Ethernet address: 00:25:11:41:af:03 re0: [MPSAFE] re0: [FILTER] pcib3: <ACPI PCI-PCI bridge> irq 19 at device 7.0 on pci0 pcib3: domain 0 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0xd000-0xefff pcib3: memory decode 0xfea00000-0xfeafffff pcib3: no prefetched decode pcib3: could not get PCI interrupt routing table for \\_SB_.PCI0.PCE7 - AE_= NOT_FOUND pci3: <ACPI PCI bus> on pcib3 pci3: domain=3D0, physical bus=3D3 found-> vendor=3D0x197b, dev=3D0x2361, revid=3D0x02 domain=3D0, bus=3D3, slot=3D0, func=3D0 class=3D01-06-01, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0107, statreg=3D0x0010, cachelnsz=3D16 (dwords) lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 ns) intpin=3Da, irq=3D11 powerspec 2 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0xe800, size 3, enabled pcib3: requested I/O range 0xe800-0xe807: in range map[14]: type I/O Port, range 32, base 0xe400, size 2, enabled pcib3: requested I/O range 0xe400-0xe403: in range map[18]: type I/O Port, range 32, base 0xe000, size 3, enabled pcib3: requested I/O range 0xe000-0xe007: in range map[1c]: type I/O Port, range 32, base 0xd800, size 2, enabled pcib3: requested I/O range 0xd800-0xd803: in range map[20]: type I/O Port, range 32, base 0xd400, size 4, enabled pcib3: requested I/O range 0xd400-0xd40f: in range map[24]: type Memory, range 32, base 0xfeafe000, size 13, enabled pcib3: requested memory range 0xfeafe000-0xfeafffff: good pcib0: matched entry for 0.7.INTA pcib0: slot 7 INTA hardwired to IRQ 19 pcib3: slot 0 INTA is routed to irq 19 atapci0: <JMicron JMB361 SATA300 controller> port 0xe800-0xe807,0xe400-0xe4= 03,0xe000-0xe007,0xd800-0xd803,0xd400-0xd40f mem 0xfeafe000-0xfeafffff irq = 19 at device 0.0 on pci3 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xd400 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 50 atapci0: [MPSAFE] atapci0: [ITHREAD] atapci0: Reserved 0x2000 bytes for rid 0x24 type 3 at 0xfeafe000 atapci0: AHCI called from vendor specific driver atapci0: AHCI v1.00 controller with 2 3Gbps ports, PM supported atapci0: Caps: 64bit NCQ AL CLO 3Gbps PM PMD 32cmd 2ports ata2: <ATA channel 0> on atapci0 ata2: AHCI reset... ata2: hardware reset ... ata2: SATA connect timeout status=3D00000000 ata2: AHCI reset done: phy reset found no device ata2: [MPSAFE] ata2: [ITHREAD] ata3: <ATA channel 1> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xe800 atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0xe400 ata3: reset tp1 mask=3D03 ostat0=3D60 ostat1=3D70 ata3: stat0=3D0x20 err=3D0x20 lsb=3D0x20 msb=3D0x20 ata3: stat1=3D0x30 err=3D0x30 lsb=3D0x30 msb=3D0x30 ata3: reset tp2 stat0=3D20 stat1=3D30 devices=3D0x0 ata3: [MPSAFE] ata3: [ITHREAD] atapci1: <ATI IXP700/800 SATA300 controller> port 0xa000-0xa007,0x9000-0x90= 03,0x8000-0x8007,0x7000-0x7003,0x6000-0x600f mem 0xfe6ffc00-0xfe6fffff irq = 22 at device 17.0 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x6000 atapci1: Reserved 0x400 bytes for rid 0x24 type 3 at 0xfe6ffc00 ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 0 vector 51 atapci1: [MPSAFE] atapci1: [ITHREAD] atapci1: AHCI v1.10 controller with 4 3Gbps ports, PM supported atapci1: Caps: 64bit NCQ SNTF MPS ALP AL CLO 3Gbps PM PMD SSC PSC 32cmd CCC= 4ports ata4: <ATA channel 0> on atapci1 ata4: AHCI reset... ata4: hardware reset ... ata4: SATA connect timeout status=3D00000000 ata4: AHCI reset done: phy reset found no device ata4: [MPSAFE] ata4: [ITHREAD] ata5: <ATA channel 1> on atapci1 ata5: AHCI reset... ata5: hardware reset ... ata5: SATA connect timeout status=3D00000000 ata5: AHCI reset done: phy reset found no device ata5: [MPSAFE] ata5: [ITHREAD] ata6: <ATA channel 2> on atapci1 ata6: AHCI reset... ata6: hardware reset ... ata6: SATA connect timeout status=3D00000000 ata6: AHCI reset done: phy reset found no device ata6: [MPSAFE] ata6: [ITHREAD] ata7: <ATA channel 3> on atapci1 ata7: AHCI reset... ata7: hardware reset ... ata7: SATA connect timeout status=3D00000000 ata7: AHCI reset done: phy reset found no device ata7: [MPSAFE] ata7: [ITHREAD] ohci0: <OHCI (generic) USB controller> mem 0xfe6fe000-0xfe6fefff irq 16 at = device 18.0 on pci0 ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe6fe000 ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 52 ohci0: [MPSAFE] ohci0: [ITHREAD] usbus0: <OHCI (generic) USB controller> on ohci0 ohci1: <OHCI (generic) USB controller> mem 0xfe6fd000-0xfe6fdfff irq 16 at = device 18.1 on pci0 ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe6fd000 ohci1: [MPSAFE] ohci1: [ITHREAD] usbus1: <OHCI (generic) USB controller> on ohci1 ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe6ff800-0xfe6ff8ff irq 17= at device 18.2 on pci0 ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfe6ff800 ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 53 ehci0: [MPSAFE] ehci0: [ITHREAD] usbus2: EHCI version 1.0 usbus2: <EHCI (generic) USB 2.0 controller> on ehci0 ohci2: <OHCI (generic) USB controller> mem 0xfe6fc000-0xfe6fcfff irq 18 at = device 19.0 on pci0 ohci2: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe6fc000 ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 54 ohci2: [MPSAFE] ohci2: [ITHREAD] usbus3: <OHCI (generic) USB controller> on ohci2 ohci3: <OHCI (generic) USB controller> mem 0xfe6fb000-0xfe6fbfff irq 18 at = device 19.1 on pci0 ohci3: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe6fb000 ohci3: [MPSAFE] ohci3: [ITHREAD] usbus4: <OHCI (generic) USB controller> on ohci3 ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe6ff400-0xfe6ff4ff irq 19= at device 19.2 on pci0 ehci1: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfe6ff400 ehci1: [MPSAFE] ehci1: [ITHREAD] usbus5: EHCI version 1.0 usbus5: <EHCI (generic) USB 2.0 controller> on ehci1 pci0: <serial bus, SMBus> at device 20.0 (no driver attached) atapci2: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0= x177,0x376,0xff00-0xff0f at device 20.1 on pci0 atapci2: Reserved 0x10 bytes for rid 0x20 type 4 at 0xff00 ata0: <ATA channel 0> on atapci2 atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci2: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=3D03 ostat0=3D7f ostat1=3D7f ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata0: stat0=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata0: stat1=3D0x7f err=3D0xff lsb=3D0xff msb=3D0xff ata0: reset tp2 stat0=3Dff stat1=3Dff devices=3D0x0 ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 55 ata0: [MPSAFE] ata0: [ITHREAD] ata1: <ATA channel 1> on atapci2 atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci2: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D00 ata1: stat0=3D0x50 err=3D0x01 lsb=3D0x00 msb=3D0x00 ata1: stat1=3D0x00 err=3D0x01 lsb=3D0x00 msb=3D0x00 ata1: reset tp2 stat0=3D50 stat1=3D00 devices=3D0x1 ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 56 ata1: [MPSAFE] ata1: [ITHREAD] pci0: <multimedia, HDA> at device 20.2 (no driver attached) isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0 pcib4: domain 0 pcib4: secondary bus 4 pcib4: subordinate bus 4 pcib4: I/O decode 0xf000-0xfff pcib4: memory decode 0xfeb00000-0xfebfffff pcib4: no prefetched decode pcib4: Subtractively decoded bridge. pci4: <ACPI PCI bus> on pcib4 pci4: domain=3D0, physical bus=3D4 found-> vendor=3D0x1033, dev=3D0x00f2, revid=3D0x01 domain=3D0, bus=3D4, slot=3D6, func=3D0 class=3D0c-00-10, hdrtype=3D0x00, mfdev=3D0 cmdreg=3D0x0116, statreg=3D0x0290, cachelnsz=3D16 (dwords) lattimer=3D0x40 (1920 ns), mingnt=3D0x14 (5000 ns), maxlat=3D0x2c (11000 n= s) intpin=3Da, irq=3D11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type Memory, range 32, base 0xfebff000, size 12, enabled pcib4: requested memory range 0xfebff000-0xfebfffff: good pcib4: matched entry for 4.6.INTA pcib4: slot 6 INTA hardwired to IRQ 21 fwohci0: <NEC uPD72874> mem 0xfebff000-0xfebfffff irq 21 at device 6.0 on p= ci4 fwohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfebff000 ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 57 fwohci0: [MPSAFE] fwohci0: [ITHREAD] fwohci0: OHCI version 1.10 (ROM=3D1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:00:4c:01:00:00:3b:c7 fwohci0: Phy 1394a available S400, 3 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 dcons_crom0: <dcons configuration ROM> on firewire0 dcons_crom0: bus_addr 0xcc4b8000 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:00:4c:00:3b:c7 fwe0: bpf attached fwe0: Ethernet address: 02:00:4c:00:3b:c7 fwip0: <IP over FireWire> on firewire0 fwip0: bpf attached fwip0: Firewire address: 00:00:4c:01:00:00:3b:c7 @ 0xfffe00000000, S400, ma= xrec 2048 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: fwohci_intr_core: BUS reset fwohci0: fwohci_intr_core: node_id=3D0x00000001, SelfID Count=3D1, CYCLEMAS= TER mode ohci4: <OHCI (generic) USB controller> mem 0xfe6fa000-0xfe6fafff irq 18 at = device 20.5 on pci0 ohci4: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe6fa000 ohci4: [MPSAFE] ohci4: [ITHREAD] usbus6: <OHCI (generic) USB controller> on ohci4 acpi_button0: <Power Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 kbd0: atkbd0, generic (0), config:0x0, flags:0x3f0000 ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 58 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: unable to allocate IRQ psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 psm0: current command byte:0065 psm0: failed to reset the aux device. atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock (resolution 1000000us) cpu0: <ACPI CPU> on acpi0 cpu0: switching to generic Cx mode acpi_throttle0: <ACPI CPU Throttling> on cpu0 acpi_throttle0: P_CNT from P_BLK 0x810 hwpstate0: <Cool`n'Quiet 2.0> on cpu0 cpu1: <ACPI CPU> on acpi0 ahc_isa_probe 0: ioport 0xc00 alloc failed pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete ex_isa_identify() unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff isa_probe_children: disabling PnP devices pmtimer0 on isa0 ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it atrtc: atrtc0 already exists; skipping it sc: sc0 already exists; skipping it isa_probe_children: probing non-PnP devices sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 ppc0: parallel port not found. ppc0: <Parallel port> failed to probe at irq 7 on isa0 uart0: <ns8250> failed to probe at port 0x3f8-0x3ff irq 4 on isa0 uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0 isa_probe_children: probing PnP devices Device configuration finished. Reducing kern.maxvnodes 214309 -> 100000 procfs registered lapic: Divisor 2, Frequency 100004070 hz Timecounter "TSC" frequency 3000121837 Hz quality -100 Timecounters tick every 1.000 msec lo0: bpf attached hptrr: no controller detected. firewire0: 2 nodes, maxhop <=3D 1 cable IRM irm(1) (me)=20 firewire0: bus manager 1=20 ata0: Identifying devices: 00000000 ata0: New devices: 00000000 ata1: Identifying devices: 00000001 ata1: New devices: 00000001 usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 480Mbps High Speed USB v2.0 usbus3: 12Mbps Full Speed USB v1.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 480Mbps High Speed USB v2.0 usbus6: 12Mbps Full Speed USB v1.0 ata1-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA100 cable=3D80 wire ad2: setting PIO4 on IXP700/800 chip ad2: setting UDMA100 on IXP700/800 chip ad2: 238475MB <Seagate ST3250620A 3.AAD> at ata1-master UDMA100 ad2: 488397168 sectors [484521C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad2 ugen0.1: <ATI> at usbus0 uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 ugen1.1: <ATI> at usbus1 uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 ugen2.1: <ATI> at usbus2 uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 ugen3.1: <ATI> at usbus3 uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 ugen4.1: <ATI> at usbus4 uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen5.1: <ATI> at usbus5 uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 ugen6.1: <ATI> at usbus6 uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 ad2: Silicon Image check3 failed ad2: Adaptec check1 failed ad2: LSI (v3) check1 failed ad2: LSI (v2) check1 failed ad2: FreeBSD check1 failed ata2: Identifying devices: 00000000 ata2: New devices: 00000000 ata3: Identifying devices: 00000000 ata3: New devices: 00000000 ata4: Identifying devices: 00000000 ata4: New devices: 00000000 ata5: Identifying devices: 00000000 ata5: New devices: 00000000 ata6: Identifying devices: 00000000 ata6: New devices: 00000000 ata7: Identifying devices: 00000000 ata7: New devices: 00000000 firewire0: New S400 device ID:00004c01070067c4 uhub6: 2 ports with 2 removable, self powered uhub0: 3 ports with 3 removable, self powered uhub1: 3 ports with 3 removable, self powered uhub3: 3 ports with 3 removable, self powered uhub4: 3 ports with 3 removable, self powered uhub2: 6 ports with 6 removable, self powered uhub5: 6 ports with 6 removable, self powered ugen4.2: <Unicomp> at usbus4 ukbd0: <HID Keyboard> on usbus4 kbd2 at ukbd0 kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000 (probe0:sbp0:0:0:0): error 22 (probe0:sbp0:0:0:0): Unretryable Error (probe1:sbp0:0:1:0): error 22 (probe1:sbp0:0:1:0): Unretryable Error (probe2:sbp0:0:2:0): error 22 (probe2:sbp0:0:2:0): Unretryable Error (probe3:sbp0:0:3:0): error 22 (probe3:sbp0:0:3:0): Unretryable Error (probe4:sbp0:0:4:0): error 22 (probe4:sbp0:0:4:0): Unretryable Error (probe5:sbp0:0:5:0): error 22 (probe5:sbp0:0:5:0): Unretryable Error (probe6:sbp0:0:6:0): error 22 (probe6:sbp0:0:6:0): Unretryable Error ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400 ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 1 vector 48 ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 1 vector 49 ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 1 vector 50 ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 1 vector 51 ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 1 vector 52 WARNING: WITNESS option enabled, expect reduced performance. WARNING: DIAGNOSTIC option enabled, expect reduced performance. Trying to mount root from ufs:/dev/label/root ct_to_ts([2009-10-03 01:24:50]) =3D 1254533090.000000000 start_init: trying /sbin/init Linux ELF exec handler installed linprocfs registered ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based forwar= ding disabled, default to deny, logging disabled Expensive timeout(9) function: 0xc0732770(0xc6f2a000) 0.004008889 s re0: link state changed to UP --BOKacYhQ+x31HxR3 Content-Type: text/plain; charset=utf-8 Content-Disposition: attachment; filename="dconschat.out" Content-Transfer-Encoding: quoted-printable musicbox:~$ sudo fwcontrol Password: 2 devices (info_len=3D2) node EUI64 status hostname 1 00-00-4c-01-07-00-67-c4 0 =20 0 00-00-4c-01-00-00-3b-c7 1 =20 musicbox:~$ sudo dconschat =E2=80=90br =E2=80=90G 12345 =E2=80=90t 00-00-4c= -01-00-00-3b-c7 dconschat: kvm_nlist: No such file or directory [dcons connected] --BOKacYhQ+x31HxR3 Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="gdb.out" musicbox:~$ sudo kgdb kernel Password: GNU gdb 6.1.1 [FreeBSD] Copyright 2004 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "i386-marcel-freebsd"...(no debugging symbols found)... (kgdb) target remote :12345 :12345: Connection refused. --BOKacYhQ+x31HxR3-- --3uo+9/B/ebqu+fSQ Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.13 (FreeBSD) iEYEARECAAYFAkrGr7IACgkQaUz3f+Zf+Xv16wCgpQpoLM70g5Up3OvCGHNAFV68 u/QAoLsBagRtH+Z5W8naAkVkOmxK4Wy5 =q0Gw -----END PGP SIGNATURE----- --3uo+9/B/ebqu+fSQ--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20091003015810.GA1661>