Date: Thu, 26 Sep 2002 16:15:57 -0400 From: Yanek Korff <yanek@cigital.com> To: 'John Baldwin' <jhb@FreeBSD.org> Cc: "'freebsd-scsi@freebsd.org'" <freebsd-scsi@freebsd.org>, "'freebsd-hardware@freebsd.org'" <freebsd-hardware@freebsd.org> Subject: RE: SCSI controller & NIC problem - irq11 Message-ID: <51CC94132526754995E79DCF28C0C34D09BE1A@exchange.cigital.com>
next in thread | raw e-mail | index | archive | help
> If the card is in a PCI slot then pciconf will say something unless
> there is a drastic hardware error. It would be a 'none'
> device though.
Humph. I'll have to kick the machine around then. It's just -not detected-
Will give more info after I go to the colo this eve...
BTW, if you're curious, here are the none devices:
none0@pci0:0:1: class=0xff0000 card=0x34198086 chip=0x25418086 rev=0x02
hdr=0x00
vendor = 'Intel Corporation'
device = 'E7500 System Controller (MCH, Hub Interface A)'
none1@pci0:31:3: class=0x0c0500 card=0x34198086 chip=0x24838086
rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801CA/CAM (ICH3-S/ICH3-M) SMBus Controller'
class = serial bus
subclass = SMBus
none2@pci1:28:0: class=0x080020 card=0x34198086 chip=0x14618086
rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82870P2 I/OxAPIC Interrupt Controller'
class = base peripheral
subclass = interrupt controller
none3@pci1:30:0: class=0x080020 card=0x34198086 chip=0x14618086
rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82870P2 I/OxAPIC Interrupt Controller'
class = base peripheral
subclass = interrupt controller
none4@pci3:1:0: class=0x010000 card=0x78308086 chip=0x00211000 rev=0x01
hdr=0x00
vendor = 'LSI Logic (Was: Symbios Logic, NCR)'
device = 'LSI53C1000/1000R/1010R/1010-66 PCI to Ultra160 SCSI
Controller'
class = mass storage
subclass = SCSI
none5@pci4:3:0: class=0x030000 card=0x34198086 chip=0x47521002 rev=0x27
hdr=0x00
vendor = 'ATI Technologies'
device = 'Rage XL PCI'
class = display
subclass = VGA
Thanks for the feedback so far.
-Yanek.
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?51CC94132526754995E79DCF28C0C34D09BE1A>