Date: Fri, 30 Sep 2005 10:01:05 +0200 From: "Rehsack Jens \(ext\)" <jens.rehsack.ext@siemensvdo.com> To: "M. Warner Losh" <imp@bsdimp.com> Cc: jon@FreeBSD.org, current@FreeBSD.org Subject: RE: Problems with Acer Travelmate & PC-Card interface Message-ID: <CE3682EF98A64140B2BF376C39461E0A02F882@krbdf7ma.ww011.siemens.net>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
From: M. Warner Losh [mailto:imp@bsdimp.com]
Sent: Thursday, September 29, 2005 4:42 PM
To: Rehsack Jens (ext)
Cc: jon@FreeBSD.org; current@FreeBSD.org
Subject: Re: Problems with Acer Travelmate & PC-Card interface
In message:
<CE3682EF98A64140B2BF376C39461E0A02F817@krbdf7ma.ww011.siemens.net>
"Rehsack Jens \(ext\)" <jens.rehsack.ext@siemensvdo.com>
writes:
> : I've cut out the relevant lines from my kernel configuration and
attach
> : them.
> : I think, it's complete (for getting an ath(4) card via cardbus
> : running)...
>
> Not sure. It looks like it should be good.
Maybe it reassures that it work with the lines on my viao N505X ;)
> : > You'll need to turn on pccard debugging.
> :
> : How do I do this? In the sys/conf/NOTES there is nothing to find
'bout
> : pccard debugging, neither in pccard(4) nor in pccbb(4).
>
> Should be added.
>
> hw.pccard.cis_debug=1
> hw.pccard.debug=1
> hw.cbb.debug=1
> hw.cardbus.cis_debug=1
> hw.cardbus.debug=1
>
> should do the trick.
dmesg.boot is attached (having plugged the card on turning the machine
on). Adding after boot is more difficult because of the ACPI-Message
spamming.
> : > The bridge in your laptop is
> : > known to the driver (which surprises me!), but looks like it might
be
> : > TI6411-class (which should be in the tables, I'll double check).
> :
> : I don't think so. It's detected as a generic cardbus (yenta
compliant)
> : chipset. But if you want me to test sth. out - feel free to contact
me.
>
> OK. I'll investigate why it isn't picking things up.
Thank you very much.
Jens
[-- Attachment #2 --]
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-BETA5 #7: Wed Sep 28 19:29:12 UTC 2005
root@kermit.muppets.liwing.de:/usr/obj/usr/src/sys/KERMIT
WARNING: WITNESS option enabled, expect reduced performance.
WARNING: DIAGNOSTIC option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80790000.
ACPI APIC Table: <PTLTD APIC >
Calibrating clock(s) ... i8254 clock: 1193169 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1600008478 Hz
CPU: AMD Turion(tm) 64 Mobile Technology ML-28 (1600.01-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x20f42 Stepping = 2
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
Features2=0x1<SSE3>
AMD Features=0xe2500800<SYSCALL,NX,MMX+,<b25>,LM,3DNow+,3DNow>
L1 2MB data TLB: 8 entries, fully associative
L1 2MB instruction TLB: 8 entries, fully associative
L1 4KB data TLB: 32 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 2MB unified TLB: 0 entries, disabled/not present
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
real memory = 1072300032 (1022 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009afff, 630784 bytes (154 pages)
0x000000000088d000 - 0x000000003e069fff, 1031655424 bytes (251869 pages)
avail memory = 1025880064 (978 MB)
APIC: CPU 0 has ACPI ID 0
MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: Interrupt override: source 9, irq 21
ioapic0: intpin 9 disabled
ioapic0: intpin 21 trigger: level
ioapic0: intpin 21 polarity: low
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
ioapic0 <Version 2.1> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050010 LDR: 0x01000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
wlan: <802.11 Link Layer>
ath_rate: <Atsushi Onoe's rate control algorithm>
mem: <memory>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
io: <I/O>
ath_hal: 0.9.14.9 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413)
acpi0: <PTLTD RSDT> on motherboard
acpi0: Overriding SCI Interrupt from IRQ 9 to IRQ 21
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000a104
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=59501002)
AcpiOsDerivePciId: bus 0 dev 20 func 1
AcpiOsDerivePciId: bus 4 dev 0 func 0
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> irq 0 on acpi0
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 10 11
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 10 11
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 10 11
pci_link1: <ACPI PCI Link LNKB> irq 0 on acpi0
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 10 11
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 10 11
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 10 11
pci_link2: <ACPI PCI Link LNKC> irq 0 on acpi0
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 10 11
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 10 11
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 10 11
pci_link3: <ACPI PCI Link LNKD> irq 0 on acpi0
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 10 11
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 10 11
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 10 11
pci_link4: <ACPI PCI Link LNKE> irq 0 on acpi0
pci_link4: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 10 11
pci_link4: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 10 11
pci_link4: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 10 11
pci_link5: <ACPI PCI Link LNKF> irq 0 on acpi0
pci_link5: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 10 11
pci_link5: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 10 11
pci_link5: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 10 11
pci_link6: <ACPI PCI Link LNKG> irq 0 on acpi0
pci_link6: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 10 11
pci_link6: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 10 11
pci_link6: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 10 11
pci_link7: <ACPI PCI Link LNKH> irq 0 on acpi0
pci_link7: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 10 11
pci_link7: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 10 11
pci_link7: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 10 11
AcpiOsDerivePciId: bus 0 dev 0 func 0
acpi_ec0: <Embedded Controller: GPE 0x3> port 0x62,0x66 on acpi0
acpi_ec0: info: new max delay is 11000 us
ACPI timer: 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x1002, dev=0x5950, revid=0x01
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2220, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1002, dev=0x5a34, revid=0x00
bus=0, slot=2, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1002, dev=0x5a38, revid=0x00
bus=0, slot=6, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0000, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1002, dev=0x5a39, revid=0x00
bus=0, slot=7, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1002, dev=0x4374, revid=0x00
bus=0, slot=19, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
MSI supports 1 message
map[10]: type 1, range 32, base c0000000, size 12, enabled
pcib0: matched entry for 0.19.INTA
pcib0: slot 19 INTA hardwired to IRQ 19
found-> vendor=0x1002, dev=0x4375, revid=0x00
bus=0, slot=19, func=1
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
MSI supports 1 message
map[10]: type 1, range 32, base c0001000, size 12, enabled
pcib0: matched entry for 0.19.INTA
pcib0: slot 19 INTA hardwired to IRQ 19
found-> vendor=0x1002, dev=0x4373, revid=0x00
bus=0, slot=19, func=2
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0013, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 1 message
map[10]: type 1, range 32, base c0002000, size 12, enabled
pcib0: matched entry for 0.19.INTA
pcib0: slot 19 INTA hardwired to IRQ 19
found-> vendor=0x1002, dev=0x4372, revid=0x11
bus=0, slot=20, func=0
class=0c-05-00, hdrtype=0x00, mfdev=1
cmdreg=0x0003, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 4, range 32, base 00008400, size 4, enabled
map[14]: type 1, range 32, base c0003000, size 10, enabled
found-> vendor=0x1002, dev=0x4376, revid=0x00
bus=0, slot=20, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
MSI supports 1 message
map[20]: type 4, range 32, base 00008410, size 4, enabled
pcib0: matched entry for 0.20.INTA
pcib0: slot 20 INTA hardwired to IRQ 16
found-> vendor=0x1002, dev=0x4377, revid=0x00
bus=0, slot=20, func=3
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1002, dev=0x4371, revid=0x00
bus=0, slot=20, func=4
class=06-04-01, hdrtype=0x01, mfdev=1
cmdreg=0x0007, statreg=0x02a0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1002, dev=0x4370, revid=0x02
bus=0, slot=20, func=5
class=04-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0430, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
MSI supports 1 message
map[10]: type 1, range 32, base c0003400, size 8, enabled
pcib0: matched entry for 0.20.INTB
pcib0: slot 20 INTB hardwired to IRQ 17
found-> vendor=0x1002, dev=0x4378, revid=0x02
bus=0, slot=20, func=6
class=07-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0430, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
MSI supports 1 message
map[10]: type 1, range 32, base c0003800, size 8, enabled
pcib0: matched entry for 0.20.INTB
pcib0: slot 20 INTB hardwired to IRQ 17
found-> vendor=0x1022, dev=0x1100, revid=0x00
bus=0, slot=24, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
bus=0, slot=24, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
bus=0, slot=24, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
bus=0, slot=24, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x9000-0x9fff
pcib1: memory decode 0xc0100000-0xc01fffff
pcib1: prefetched decode 0xc8000000-0xcfffffff
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x1002, dev=0x5653, revid=0x00
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 3, range 32, base c8000000, size 27, enabled
pcib1: (null) requested memory range 0xc8000000-0xcfffffff: good
map[14]: type 4, range 32, base 00009000, size 8, enabled
pcib1: (null) requested I/O range 0x9000-0x90ff: in range
map[18]: type 1, range 32, base c0100000, size 16, enabled
pcib1: (null) requested memory range 0xc0100000-0xc010ffff: good
pcib1: matched entry for 1.0.INTA
pcib1: slot 0 INTA hardwired to IRQ 18
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pcib2: secondary bus 9
pcib2: subordinate bus 9
pcib2: I/O decode 0x0-0x0
pcib2: memory decode 0x0-0x0
pcib2: prefetched decode 0x0-0x0
pci9: <ACPI PCI bus> on pcib2
pci9: physical bus=9
pcib3: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pcib3: secondary bus 4
pcib3: subordinate bus 5
pcib3: I/O decode 0x0-0x0
pcib3: memory decode 0x0-0x0
pcib3: prefetched decode 0x0-0x0
pci4: <ACPI PCI bus> on pcib3
pci4: physical bus=4
ohci0: <OHCI (generic) USB controller> mem 0xc0000000-0xc0000fff irq 19 at device 19.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xc0000000
ohci0: (New OHCI DeviceId=0x43741002)
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1002) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xc0001000-0xc0001fff irq 19 at device 19.1 on pci0
ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xc0001000
ohci1: (New OHCI DeviceId=0x43751002)
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: (0x1002) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xc0002000-0xc0002fff irq 19 at device 19.2 on pci0
ehci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xc0002000
ehci0: (New EHCI DeviceId=0x43731002)
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 4 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: (0x1002) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 8 ports with 8 removable, self powered
usb2: handing over low speed device on port 2 to usb0
uhub2: port 2, device disappeared after reset
usb2: handing over full speed device on port 3 to usb0
uhub2: port 3, device disappeared after reset
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci0: <GENERIC ATA controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x8410-0x841f irq 16 at device 20.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x8410
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: [MPSAFE]
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pcib4: secondary bus 6
pcib4: subordinate bus 6
pcib4: I/O decode 0xa000-0xafff
pcib4: memory decode 0xc0200000-0xc02fffff
pcib4: prefetched decode 0xfff00000-0xfffff
pcib4: Subtractively decoded bridge.
pci6: <ACPI PCI bus> on pcib4
pci6: physical bus=6
found-> vendor=0x14e4, dev=0x4318, revid=0x02
bus=6, slot=5, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
map[10]: type 1, range 32, base c0204000, size 13, enabled
pcib4: (null) requested memory range 0xc0204000-0xc0205fff: good
pcib4: matched entry for 6.5.INTA
pcib4: slot 5 INTA hardwired to IRQ 21
found-> vendor=0x104c, dev=0x8031, revid=0x00
bus=6, slot=6, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns)
intpin=a, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 00000000, size 12, enabled
found-> vendor=0x104c, dev=0x8032, revid=0x00
bus=6, slot=6, func=2
class=0c-00-10, hdrtype=0x00, mfdev=1
cmdreg=0x0016, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
intpin=c, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base c0208000, size 11, enabled
pcib4: (null) requested memory range 0xc0208000-0xc02087ff: good
map[14]: type 1, range 32, base c0200000, size 14, enabled
pcib4: (null) requested memory range 0xc0200000-0xc0203fff: good
pcib4: matched entry for 6.6.INTC
pcib4: slot 6 INTC hardwired to IRQ 22
found-> vendor=0x104c, dev=0x8033, revid=0x00
bus=6, slot=6, func=3
class=01-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base c0206000, size 13, enabled
pcib4: (null) requested memory range 0xc0206000-0xc0207fff: good
pcib4: matched entry for 6.6.INTA
pcib4: slot 6 INTA hardwired to IRQ 20
found-> vendor=0x104c, dev=0x8034, revid=0x00
bus=6, slot=6, func=4
class=08-05-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base c0209000, size 8, enabled
pcib4: (null) requested memory range 0xc0209000-0xc02090ff: good
map[14]: type 1, range 32, base c0208c00, size 8, enabled
pcib4: (null) requested memory range 0xc0208c00-0xc0208cff: good
map[18]: type 1, range 32, base c0208800, size 8, enabled
pcib4: (null) requested memory range 0xc0208800-0xc02088ff: good
pcib4: matched entry for 6.6.INTA
pcib4: slot 6 INTA hardwired to IRQ 20
found-> vendor=0x10ec, dev=0x8169, revid=0x10
bus=6, slot=7, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000a000, size 8, enabled
pcib4: (null) requested I/O range 0xa000-0xa0ff: in range
map[14]: type 1, range 32, base c0209400, size 8, enabled
pcib4: (null) requested memory range 0xc0209400-0xc02094ff: good
pcib4: matched entry for 6.7.INTA
pcib4: slot 7 INTA hardwired to IRQ 23
pci6: <network> at device 5.0 (no driver attached)
cbb0: <PCI-CardBus Bridge> at device 6.0 on pci6
pcib4: cbb0 requested memory range 0xc0200000-0xc02fffff: good
cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xc020a000
cbb0: Found memory at c020a000
cbb0: Secondary bus is 0
cbb0: Setting primary bus to 6
cbb0: Secondary bus set to 7 subbus 8
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib4: matched entry for 6.6.INTA
pcib4: slot 6 INTA hardwired to IRQ 20
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
0x00: 0x8031104c 0x02100007 0x06070000 0x00824010
0x10: 0xc020a000 0x020000a0 0x20080706 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x07400114
0x40: 0x00801025 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x0844f061 0x02920019 0x001f0000 0x010a1b22
0x90: 0x606402c0 0x00000000 0x00000000 0x00000000
0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
fwohci0: vendor=104c, dev=8032
fwohci0: vendor=104c, dev=8032
fwohci0: <1394 Open Host Controller Interface> mem 0xc0208000-0xc02087ff,0xc0200000-0xc0203fff irq 22 at device 6.2 on pci6
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xc0208000
fwohci0: [MPSAFE]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 12:34:56:78:12:34:56:78
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci6: <mass storage> at device 6.3 (no driver attached)
pci6: <base peripheral> at device 6.4 (no driver attached)
re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xa000
pcib4: re0 requested I/O range 0xa000-0xa0ff: in range
pcib4: re0 requested I/O range 0xa000-0xa0ff: in range
pcib4: re0 requested I/O range 0xa000-0xa0ff: in range
pcib4: re0 requested I/O range 0xa000-0xa0ff: in range
pcib4: re0 requested I/O range 0xa000-0xa0ff: in range
re0: <RealTek 8169SB Single-chip Gigabit Ethernet> port 0xa000-0xa0ff mem 0xc0209400-0xc02094ff irq 23 at device 7.0 on pci6
pcib4: re0 requested I/O range 0xa000-0xa0ff: in range
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S media interface> on miibus0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
re0: bpf attached
re0: Ethernet address: 00:0a:e4:e1:00:fa
re0: [MPSAFE]
pci0: <multimedia, audio> at device 20.5 (no driver attached)
pci0: <simple comms, generic modem> at device 20.6 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
acpi_tz2: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x1d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
sio0: configured irq 3 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0 0 0 0
sio0 port 0x2f8-0x2ff irq 3 drq 3 flags 0x10 on acpi0
sio0: type 16550A
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
atkbdc: atkbdc0 already exists; skipping it
sio: sio0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xdc000-0xdffff on isa0
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1 failed to probe at port 0x2f8 irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
isa_probe_children: probing PnP devices
uhub3: vendor 0x046a product 0x0003, class 9/1, rev 1.00/6.04, addr 2
uhub3: 5 ports with 4 removable, bus powered
ukbd0: vendor 0x046a product 0x0001, rev 1.00/6.04, addr 3, iclass 3/1
kbd: new array size 4
kbd1 at ukbd0
kbd1: ukbd0, generic (0), config:0x0, flags:0x1d0000
ums0: Logitech USB Mouse, rev 1.10/6.20, addr 2, iclass 3/1
ums0: 4 buttons and Z dir.
Device configuration finished.
linprocfs registered
procfs registered
lapic: Divisor 2, Frequency 100000546 hz
Timecounter "TSC" frequency 1600008478 Hz quality 800
Timecounters tick every 1.000 msec
Linux ELF exec handler installed
lo0: bpf attached
Expensive timeout(9) function: 0xffffffff802b6b50(0) 0.003471949 s
battery0: battery initialization start
acpi_acad0: acline initialization start
Status is 0x30000820
cbb0: card inserted: event=0x00000000, state=30000820
cbb0: cbb_power: 3V
cbb0: cbb_power: 0V
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
atapicam: atapicam0 already exists; skipping it
ad0: 76319MB <Seagate ST9808210A 3.01> at ata0-master UDMA33
ad0: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad0
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=80 wire
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
acd0: <TSSTcorpCD/DVDW TS-L632B/TI30> DVDR drive at ata1 as master
acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
acd0: Audio: play, 16 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-ROM unknown
Expensive timeout(9) function: 0xffffffff8029b1c0(0xffffff003da70980) 0.003865854 s
(probe0:ata1:0:0:0): error 6
(probe0:ata1:0:0:0): Unretryable Error
(probe1:sbp0:0:0:0): error 22
(probe1:sbp0:0:0:0): Unretryable Error
(probe2:sbp0:0:1:0): error 22
(probe2:sbp0:0:1:0): Unretryable Error
(probe3:sbp0:0:2:0): error 22
(probe3:sbp0:0:2:0): Unretryable Error
(probe4:sbp0:0:3:0): error 22
(probe4:sbp0:0:3:0): Unretryable Error
(probe7:sbp0:0:6:0): error 22
(probe7:sbp0:0:6:0): Unretryable Error
(probe5:sbp0:0:4:0): error 22
(probe5:sbp0:0:4:0): Unretryable Error
(probe6:sbp0:0:5:0): error 22
(probe6:sbp0:0:5:0): Unretryable Error
pass0 at ata1 bus 0 target 0 lun 0
pass0: <TSSTcorp CD/DVDW TS-L632B TI30> Removable CD-ROM SCSI-0 device
pass0: Serial Number [
pass0: 33.000MB/s transfers
GEOM: new disk cd0
ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0
ioapic0: routing intpin 3 (ISA IRQ 3) to cluster 0
ioapic0: routing intpin 12 (ISA IRQ 12) to cluster 0
ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0
ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0
ioapic0: routing intpin 19 (PCI IRQ 19) to cluster 0
ioapic0: routing intpin 20 (PCI IRQ 20) to cluster 0
ioapic0: routing intpin 21 (PCI IRQ 21) to cluster 0
ioapic0: routing intpin 22 (PCI IRQ 22) to cluster 0
ioapic0: routing intpin 23 (PCI IRQ 23) to cluster 0
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
cd0 at ata1 bus 0 target 0 lun 0
cd0: <TSSTcorp CD/DVDW TS-L632B TI30> Removable CD-ROM SCSI-0 device
cd0: Serial Number [
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
Trying to mount root from ufs:/dev/ad0s1a
start_init: trying /sbin/init
WARNING: /home was not properly dismounted
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
Expensive timeout(9) function: 0xffffffff8041ea00(0xffffffff806bbf40) 0.008978794 s
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CE3682EF98A64140B2BF376C39461E0A02F882>