Date: Tue, 13 Jan 2004 02:53:01 -0800 From: Brian Rogers <burpmaster@truffula.net> To: freebsd-multimedia@freebsd.org Subject: Brooktree video-in on GeForce 4? Message-ID: <4003CE0D.7090407@truffula.net>
next in thread | raw e-mail | index | archive | help
I have an MSI GeForce 4 Ti 4400 with dual VGA, TV-out, and TV-in. I
currently have the first two of the three features working, but I
haven't been able to get any capture devices detected. From my reading,
it looks like the brooktree chipset is used by almost everything that
has a TV-tuner or video in, but I can't be sure if that's what's in my
card. Does anybody know for sure what chip this card has, or how I can
find out?
Output of dmesg:
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #4: Mon Jan 12 17:18:36 PST 2004
brian@brian:/usr/obj/usr/src/sys/MYKERN
Preloaded elf kernel "/boot/kernel/kernel" at 0xc095e000.
Preloaded elf module "/boot/kernel/snd_emu10k1.ko" at 0xc095e244.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc095e2f4.
Preloaded elf module "/boot/kernel/nvidia.ko" at 0xc095e3a0.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc095e44c.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) XP 1800+ (1533.40-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x662 Stepping = 2
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!>
real memory = 1073676288 (1023 MB)
avail memory = 1041158144 (992 MB)
ACPI APIC Table: <AMIINT VIA_K7 >
ioapic0 <Version 0.3> irqs 0-23 on motherboard
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <AMIINT VIA_K7> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 11 entries at 0xc00f7f20
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib1: slot 0 INTA is routed to irq 16
nvidia0: <GeForce4 Ti 4400> mem
0xddc80000-0xddcfffff,0xd0000000-0xd7ffffff,0xde000000-0xdeffffff irq 16
at device 0.0 on pci1
dc0: <LC82C115 PNIC II 10/100BaseTX> port 0xe800-0xe8ff mem
0xdfffff00-0xdfffffff irq 17 at device 6.0 on pci0
dc0: Ethernet address: 00:a0:cc:33:8e:1b
miibus0: <MII bus> on dc0
dcphy0: <Intel 21143 NWAY media interface> on miibus0
dcphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcm0: <Creative EMU10K1> port 0xe400-0xe41f irq 17 at device 10.0 on pci0
pcm0: <Cirrus Logic CS4297A AC97 Codec>
uhci0: <VIA 83C572 USB controller> port 0xdc00-0xdc1f irq 21 at device
16.0 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub0: port error, restarting port 1
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.10, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
uhci1: <VIA 83C572 USB controller> port 0xe000-0xe01f irq 21 at device
16.1 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ugen0: Texas Instruments Incorporated TI-GRAPH LINK USB, rev 1.10/1.03,
addr 2
uhub1: port error, restarting port 2
uhub1: port error, giving up port 2
pci0: <serial bus, USB> at device 16.3 (no driver attached)
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8235 UDMA133 controller> port 0xfc00-0xfc0f at device 17.1
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
acpi_button1: <Sleep Button> on acpi0
fdc0: cmd 3 failed at out byte 1 of 3
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
fdc0: cmd 3 failed at out byte 1 of 3
orm0: <Option ROM> at iomem 0xc0000-0xce7ff on isa0
pmtimer0 on isa0
fdc0: cannot reserve I/O port range (6 ports)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1533396026 Hz quality 800
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 16 steps (100% to 6.2%), currently 100.0%
GEOM: create disk ad0 dp=0xc62c9460
ad0: 114473MB <WDC WD1200JB-00CRA0> [232581/16/63] at ata0-master UDMA100
GEOM: create disk ad1 dp=0xc6248e60
ad1: 114473MB <WDC WD1200JB-00CRA1> [232581/16/63] at ata0-slave UDMA100
GEOM: create disk ad2 dp=0xc6248d60
ad2: 78533MB <IC35L080AVVA07-0> [159560/16/63] at ata1-master UDMA100
acd0: CDRW <TDK DVDRW420N> at ata1-slave UDMA33
Mounting root from ufs:/dev/ad0s1a
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4003CE0D.7090407>