Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 17 Jan 2021 19:19:33 -0800
From:      Mark Millard <marklmi@yahoo.com>
To:        bob prohaska <fbsd@www.zefox.net>
Cc:        Current FreeBSD <freebsd-current@freebsd.org>, freebsd-arm@freebsd.org
Subject:   Re: Silent hang in buildworld, was Re: Invoking -v for clang during buildworld
Message-ID:  <60CCCDE8-E3D3-4920-9FC0-A945330F6830@yahoo.com>
In-Reply-To: <20210118015009.GA31353@www.zefox.net>
References:  <20210116043740.GA19523@www.zefox.net> <ED26508F-282D-439D-8A6A-65A136C76C84@yahoo.com> <20210116155538.GA24259@www.zefox.net> <F62027C8-0813-4E6F-934A-3088F966AF8C@yahoo.com> <20210116220334.GA26756@www.zefox.net> <C75D3D9C-4284-4BE3-B2CD-5DC6BBB60843@yahoo.com> <20210117174006.GA30728@www.zefox.net> <85889EAE-F579-4220-9185-944D9AA5075A@yahoo.com> <20210118015009.GA31353@www.zefox.net>

next in thread | previous in thread | raw e-mail | index | archive | help


On 2021-Jan-17, at 17:50, bob prohaska <fbsd at www.zefox.net> wrote:

> On Sun, Jan 17, 2021 at 12:30:51PM -0800, Mark Millard wrote:
>>=20
>>=20
>> On 2021-Jan-17, at 09:40, bob prohaska <fbsd at www.zefox.net> wrote:
>>=20
>>> On Sat, Jan 16, 2021 at 03:04:04PM -0800, Mark Millard wrote:
>>>>=20
>>>> Other than -j1 style builds (or equivalent), one pretty much
>>>> always needs to go looking around for a non-panic failure. It
>>>> is uncommon for all the material to be together in the build
>>>> log in such contexts.
>>>=20
>>> Running make cleandir twice and restarting -j4 buildworld brought
>>> the process full circle: A silent hang, no debugger response, no
>>> console warnings. That's what sent me down the rabbit hole of make
>>> without clean, which worked at least once...
>>=20
>> Unfortunately, such a hang tends to mean that log files and such
>> were not completely written out to media. We do not get to see
>> evidence of the actual failure time frame, just somewhat before.
>> (compiler/linker output and such can have the same issues of
>> ending up with incomplete updates.)
>>=20
>> So, pretty much my notes are unlikely to be strongly tied to
>> any solid evidence: more like alternatives to possibly explore
>> that could be far off the mark.
>>=20
>> It is not clear if you were using:
>>=20
>> LDFLAGS.lld+=3D -Wl,--threads=3D1
>>=20
>> or some such to limit the multi-thread linking and its memory.
> No, I wasn't trying to limit ld.lld thread number.

You might want to try a significant change in the memory use
just to see if it makes a difference or not --despite the
extra time. This could included limiting lld thread usage
and limiting to a smaller -jN .

>> I'll note that if -j4 gets 4 links running in parallel it used
>> to be each could have something like 5 threads active on a 4
>> core machine, so 20 or so threads. (I've not checked llvm11's
>> lld behavior. It might avoid such for defaults.)
>>=20
>> You have not reported any testing of -j2 or -j3 so far, just
>> -j4 . (Another way of limiting memory use, power use, temperature,
>> etc. .)
>>=20
> Not recently, simply because it's so slow to build. On my "production"
> armv7 machines running stable/12 I do use -j2. But, they get updated
> only a couple times per year, when there's a security issue.=20

See the earlier note about possibly deliberate test of
using less memory space. (And more later, below.)

>> You have not reported if your boot complained about the swap
>> space size or if you have adjusted related settings to make
>> non-default tradeoffs for swap amanagment for these specific
>> tests. I recommend not tailoring and using a swap size total
>> that is somewhat under what starts to complain when there is
>> no tailoring.
>>=20
> Both Pi2 and Pi3 have been complaining about too much swap
> since I first got them. Near as can be told it's never been
> a demonstrated problem, thus far. Now, as things like LLVM
> get bigger and bigger, it seems possible excess swap might
> cause, or obscure, other problems. For the Pi2 I picked 2
> GB from the old "2x physical RAM" rule.=20

I'd take those warnings as FreeSD reporting that the system is
expected to be in a mistuned configuration by "normal" criteria.
Doing the tuning to allow more swap has the documented tradeoffs:

  kern.maxswzone
. . .

                Note that swap metadata can be fragmented, which means =
that
                the system can run out of space before it reaches the
                theoretical limit.  Therefore, care should be taken to =
not
                configure more swap than approximately half of the
                theoretical maximum.

(The above is what the warning is about. But then there is . . .)

                Running out of space for swap metadata can leave the =
system
                in an unrecoverable state.  Therefore, you should only
                change this parameter if you need to greatly extend the =
KVM
                reservation for other resources such as the buffer cache =
or
                kern.ipc.nmbclusters.  Modifies kernel option
                VM_SWZONE_SIZE_MAX.

(NOTE: That last paragraph is talking about *decreasing* kern.maxswzone
to get more room for non-swap-managment things in KVM. [Too bad the
wording says "change".] But increasing kern.maxswzone to allow more swap
leaves less space for the buffer cache or like, making for tradeoffs
being involved.)


>>> The residue of the top screen shows
>>>=20
>>> last pid: 63377;  load averages:  4.29,  4.18,  4.15                 =
        up 1+07:11:07  04:46:46
>>> 60 processes:  5 running, 55 sleeping
>>> CPU: 70.7% user,  0.0% nice, 26.5% system,  2.8% interrupt,  0.0% =
idle
>>> Mem: 631M Active, 4932K Inact, 92M Laundry, 166M Wired, 98M Buf, 18M =
Free
>>> Swap: 2048M Total, 119M Used, 1928M Free, 5% Inuse, 16K In, 3180K =
Out
>>> packet_write_wait: Connection to 50.1.20.26 port 22: Broken pipe
>>> bob@raspberrypi:~ $ ssh www.zefox.com    RES STATE    C   TIME    =
WCPU COMMAND
>>> ssh: connect to host www.zefox.com port 22: Connection timed =
out86.17% c++
>>> bob@raspberrypi:~ $ 1  99    0   277M   231M RUN      0   3:26  =
75.00% c++
>>> 63245 bob           1  99    0   219M   173M CPU0     0   2:10  =
73.12% c++
>>> 62690 bob           1  98    0   354M   234M RUN      3   9:42  =
47.06% c++
>>> 63377 bob           1  30    0  5856K  2808K nanslp   0   0:00   =
3.13% gstat
>>> 38283 bob           1  24    0  5208K   608K wait     2   2:00   =
0.61% sh
>>> 995 bob           1  20    0  6668K  1184K CPU3     3   8:46   0.47% =
top
>>> 990 bob           1  20    0    12M  1060K select   2   0:48   0.05% =
sshd
>>> ....
>>=20
>> This does not look like ld was in use as of the last top
>> display update's content. But the time between reasonable
>> display updates is fairly long relative to CPU activity
>> so it is only suggestive.
>>=20
>>> [apologies for typing over the remnants]
>>>=20
>>> I've put copies of the build and swap logs at
>>>=20
>>> http://www.zefox.net/~fbsd/rpi2/buildworld/
>>>=20
>>> The last vmstat entry (10 second repeat time) reports:
>>> procs     memory       page                      disks     faults    =
   cpu
>>> r b w     avm     fre  flt  re  pi  po    fr   sr da0 sd0   in   sy  =
 cs us sy id
>>> 4  0 14  969160   91960   685   2   2   1   707  304   0   0 11418   =
692  1273 45  5 50
>>>=20
>>> Does that point to the memory exhaustion suggested earlier in the =
thread?
>>> At this point /boot/loader.conf contains =
vm.pfault_oom_attempts=3D"-1", but=20
>>> that's a relic of long-ago attempts to use USB flash for root and =
swap.
>>> Might removing it stimulate more warning messages?
>>>=20
>>=20
>> vm.pfault_oom_attempts=3D"-1" should only be used in contexts where
>> running out of swap will not happen. Otherwise a deadlocked system
>> can result if it does run out of swap. (Run-out has more senses the
>> just the swap partition being fully used: other internal resources
>> for keeping track of the swap can run into its limits.) I've no
>> evidence that the -1 was actually a problem.
>>=20
>> I do not find any 1000+ ms/w or ms/r figures in swapscript.log .
>> I found 3 examples of a little under 405 (on sdda0*), 3 between
>> 340 and 345 (da0*), 4 in the 200s (da0*), under 60 in the 100s
>> (da0*). It does not look to me like the recorded part had problems
>> with the long latencies that you used to have happen.
>>=20
>> So I've not found any specific evidence about what led to the
>> hangup. So my earlier questions/suggestions are basically
>> arbitrary and I would not know what to do with any answers
>> to the questions.
>>=20
>> The only notes that are fairly solid are about the hangup leading
>> to there being some files that were likely incompletely updated
>> (logs, compiler output files, etc.).
>>=20
>=20
> The notion that log files might be truncated didn't didn't register=20
> until you brought it up.=20
>=20
> The obvious things to try seem to be:
> Disable vm.pfault_oom_attempts=3D"-1"
> Decrease swap partition size
> Try using WITH_META_MODE

I'll note that you may well have already spent more time
not getting complete builds than doing one "use less memory"
test would have taken (linker thread count limits, smaller
-jN). To find fairly optimal settings for building on the
RPi2 V1.1, you may have to explore on both sides of the
optimal settings range, just to identify the optimal range
for the settings as being between known bounds.

Of course, for all I know, the "use less memory" tests might
also fail. If that happened, it would tend to stop spending
time testing configurations even less likely to finish
building.

> WITH_META_MODE  seems relatively easy; just add -DWITH_META_MODE to =
the make
> command line for buildworld and add filemon_load=3D"YES" to =
boot/loader.conf,
> but I wonder about the burdens it'll impose on CPU and disk =
space/throughput.=20
> There's nothing to lose at this stage, but I'm all ears if there's a =
better
> approach.

You could trade off some I/O by not generating swapscript.log
since it seems to not be of much help for the current issue.

I'll also note that META_MODE by default does not generate as
much stdout text but stores more across the various .meta files.
So, by default, buildworld.log (by itself) would be much
smaller. (So disabling recording of buildworld.log would not
make much of a difference.)

I'll remind of the things that are environment-only variables,
including WITH_META_MODE :

QUOTE
     The environment of make(1) for the build can be controlled via the
     SRC_ENV_CONF variable, which defaults to /etc/src-env.conf.  Some
     examples that may only be set in this file are WITH_DIRDEPS_BUILD, =
and
     WITH_META_MODE, and MAKEOBJDIRPREFIX as they are environment-only
     variables.
END QUOTE

"may only be set in this file" is false relative to setting the
enviromnent on the command line but true compared to the likes
of putting the text in /etc/src.conf or the like. My script for
building for armv7 in a armv7 context looks something like:

script =
~/sys_typescripts/typescript_make_armv7_nodebug_clang_bootstrap-armv7-host=
-$(date +%Y-%m-%d:%H:%M:%S) \
env __MAKE_CONF=3D"/root/src.configs/make.conf" SRCCONF=3D"/dev/null" =
SRC_ENV_CONF=3D"/root/src.configs/src.conf.armv7-clang-bootstrap.armv7-hos=
t" \
WITH_META_MODE=3Dyes \
MAKEOBJDIRPREFIX=3D"/usr/obj/armv7_clang/arm.armv7" \
make $*

(So I happened to not use -DWITH_META_MODE . The context is
/bin/sh based, by the way.)

There are contexts for which I control UBLR_LOADADDR via
an additional line in the above, such as:

WORLD_FLAGS=3D"${WORLD_FLAGS} UBLDR_LOADADDR=3D0x42000000" \

(But such is old material that I've not validated as
being needed in even remotely modern times.)


=3D=3D=3D
Mark Millard
marklmi at yahoo.com
( dsl-only.net went
away in early 2018-Mar)




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?60CCCDE8-E3D3-4920-9FC0-A945330F6830>