Date: Tue, 6 Nov 2007 18:47:57 +0200 From: "=?ISO-8859-5?B?zuDY2SCx4+DQ2g==?=" <jack.avenger@gmail.com> To: freebsd-arm@freebsd.org Subject: Can't boot FreeBSD-7.0 on KB920C Message-ID: <66aac5180711060847h5470b17em4c08939c60b2a918@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
Hi, I'm trying to boot FreeBSD-current of KB920C, but kernel can't detect SD
card. Here is boot log:
## Starting application at 0x20000000 ...
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-BETA1 #2: Thu Oct 25 23:23:04 EEST 2007
root@avengerBSD.voliacable.com:/usr/obj/arm/usr/src/sys/KB920X
CPU: ARM920T rev 0 (ARM9TDMI core)
DC enabled IC enabled WB enabled LABT
16KB/32B 64-way Instruction cache
16KB/32B 64-way write-back-locking-A Data cache
real memory = 67108864 (64 MB)
avail memory = 61952000 (59 MB)
atmelarm0: <AT91 device bus> on motherboard
at91_st0: <ST> mem 0xdffffd00-0xdffffdff irq 1 on atmelarm0
at91_st0: watchdog registered, timeout intervall max. 64 sec
at91_pio0: <PIOA> mem 0xdffff400-0xdffff5ff irq 1 on atmelarm0
at91_pio0: ABSR: 0x60 OSR: 0 PSR:0x3f380000 ODSR: 0
at91_pio0: [FILTER]
at91_pio1: <PIOB> mem 0xdffff600-0xdffff7ff irq 1 on atmelarm0
at91_pio1: ABSR: 0xff301 OSR: 0x2 PSR:0x3fc00cfe ODSR: 0
at91_pio1: [FILTER]
at91_pio2: <PIOC> mem 0xdffff800-0xdffff9ff irq 1 on atmelarm0
at91_pio2: ABSR: 0 OSR: 0x1000000a PSR:0xffffc075 ODSR: 0x10000000
at91_pio2: [FILTER]
at91_pio3: <PIOD> mem 0xdffffa00-0xdffffbff irq 1 on atmelarm0
at91_pio3: ABSR: 0 OSR: 0 PSR:0xfffffff ODSR: 0
at91_pio3: [FILTER]
at91_pmc0: <PMC> mem 0xdffffc00-0xdffffcff irq 1 on atmelarm0
at91_pmc0: Primary: 10000000 Hz PLLA: 180 MHz CPU: 180 MHz MCK: 60 MHz
at91_mci0: <MCI mmc/sd host bridge> mem 0xdffb4000-0xdffb7fff irq 10 on
atmelarm0
at91_mci0: [ITHREAD]
mmc0: <mmc/sd bus> on at91_mci0
at91_twi0: <TWI> mem 0xdffb8000-0xdffbbfff irq 12 on atmelarm0
at91_twi0: [ITHREAD]
iicbus0: <Philips I2C bus> on at91_twi0
setting cwgr to 0x1a4a4
iicbus0: <unknown card> at addr 0
iic0: <I2C generic I/O> on iicbus0
icee0: <I2C EEPROM> at addr 0xa0 on iicbus0
ate0: <EMAC> mem 0xdffbc000-0xdffbffff irq 24 on atmelarm0
ate0: No MAC address setdevice_attach: ate0 attach returned 6
uart0: <DBGU> mem 0xdffff200-0xdffff3ff irq 1 on atmelarm0
uart0: [FILTER]]=9M=19uart1: <USART0> mem 0xdffc0000-0xdffc3fff irq 6 on
atmelarm0
uart1: [FILTER]
uart2: <USART1> mem 0xdffc4000-0xdffc7fff irq 7 on atmelarm0
uart2: [FILTER]
uart3: <USART2> mem 0xdffc8000-0xdffcbfff irq 8 on atmelarm0
uart3: [FILTER]
uart4: <USART3> mem 0xdffcc000-0xdffcffff irq 9 on atmelarm0
uart4: [FILTER]
at91_spi0: <SPI> mem 0xdffe0000-0xdffe3fff irq 13 on atmelarm0
at91_spi0: [ITHREAD]
spibus0: <spibus bus> on at91_spi0
ohci0: <AT91 integrated ohci controller> mem 0xdfe00000-0xdfefffff irq 23 on
atmelarm0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0
usb0 on ohci0
usb0: USB revision 1.0
uhub0: <Atmel OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
Cannot get 100 Hz clock; using 100Hz
at91_st0: [FILTER]
Timecounter "AT91RM9200 timer" frequency 32768 Hz quality 1000
Timecounters tick every 10.000 msec
mmc0: setting transfer rate to 30.000MHz
Trying to mount root from ufs:/dev/mmcsd0s1a
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem <fstype>
eg. ufs:/dev/da0a
? List valid disk boot devices
<empty line> Abort manual input
mountroot>
So I have several qestions:
1. Which types (and sizes) of memory cards support FreeBSD ?
2. I loaded kernel via Uboot, can FreeBSD work correctly in this case or I
need set some additional parameters in Uboot (if yes - how and where)?
3. Kernel can't detect my PHY (LTX972C) - how to solve this problem?
P.S: Boot SD and ethernet works correctly under linux which goes with board
from factory.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?66aac5180711060847h5470b17em4c08939c60b2a918>