Date: Fri, 17 Feb 2006 15:45:36 +0100 From: Mateusz Jedrasik <m.jedrasik@gmail.com> To: freebsd-alpha@freebsd.org Subject: FreeBSD 6.0 on AlphaServer 1200 FAILURE :[ Message-ID: <1140187537.24445.0.camel@localhost.localdomain>
next in thread | raw e-mail | index | archive | help
Hello,
I have recently managed to boot 6.0-Release onto my AS1200 machine.
Unfortunately, errors appear. Below i attach the console output from the
booting process, hoping perhaps someone might know what to do with
it :-)
Cheers,
and t.i.a.
//m.
ps. please cc me a reply as i am not subscribed to this list.
OK boot -v
Entering /boot/kernel/kernel at 0xfffffc000034a9d0...
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD 6.0-RELEASE #0: Thu Nov 3 01:10:43 UTC 2005
root@ds10.freebie.xs4all.nl:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xfffffc0000e54000.
Preloaded mfs_root "/boot/mfsroot" at 0xfffffc0000e540e0.
AlphaServer 4100
AlphaServer 1200 5/533 4MB, 531MHz
8192 byte page size, 2 processors.
CPU: EV56 (21164A) major=7 minor=2 extensions=0x1<BWX>
OSF PAL rev: 0x4000200020117
real memory = 534757376 (509 MB)
Physical memory chunk(s):
0x00e74000 - 0x0fffffff, 253280256 bytes (30918 pages)
0x20000000 - 0x2f489fff, 256417792 bytes (31301 pages)
avail memory = 506200064 (482 MB)
smp_start_secondary: starting cpu 1
smp_start_secondary: cpu 1 started
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): PAL ID: 0
cpu1 (AP): PAL ID: 1
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
mem: <memory>
mcbus0: <MCBUS Backplane Bus>
pcib0: <MCPCIA PCI Adapter> at mcbus0 gid 7 mid 5
pcib0: Horse Revision 3, Left Handed Saddle Revision 3, CAP Revision 2
pci0: <PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x1000, dev=0x0001, revid=0x02
bus=0, slot=1, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0147, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0xff (7650 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[10]: type 4, range 32, base 01fffe00, size 8, enabled
map[14]: type 1, range 32, base 07ff6f00, size 8, enabled
found-> vendor=0x9004, dev=0x7178, revid=0x00
bus=0, slot=2, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0147, statreg=0x0280, cachelnsz=16 (dwords)
lattimer=0xfc (7560 ns), mingnt=0x08 (2000 ns), maxlat=0x08
(2000 ns)
intpin=a, irq=255
map[10]: type 4, range 32, base 01ffff00, size 8, enabled
map[14]: type 1, range 32, base 07ff7000, size 12, enabled
sym0: <810> port 0x1fffe00-0x1fffeff mem 0x7ff6f00-0x7ff6fff at device
1.0 on pci0
sym0: Reserved 0x100 bytes for rid 0x14 type 3 at 0x7ff6f00
sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
sym0: open drain IRQ line driver
sym0: using NCR-generic firmware.
sym0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 00/00/00/00/00/00
sym0: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 03/c8/00/00/08/00
sym0: Delay (GEN=11): 266 msec, 33414 KHz
sym0: Delay (GEN=11): 283 msec, 31407 KHz
sym0: Delay (GEN=11): 282 msec, 31518 KHz
sym0: interrupting at IRQ 0x10 (vec 0xb40)
sym0: [GIANT-LOCKED]
ahc0: <Adaptec 2940 SCSI adapter> port 0x1ffff00-0x1ffffff mem
0x7ff7000-0x7ff7fff at device 2.0 on pci0
ahc0: Defaulting to MEMIO off
ahc0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x1ffff00
unexpected machine check:
mces = 0x1
vector = 0x670
param = 0xfffffc0000004838
pc = 0xfffffc0000764574
ra = 0xfffffc0000396f30
curproc = 0xfffffc000091e4d8
pid = 0, comm = swapper
panic: machine check
cpuid = 0
Uptime: 1s
Automatic reboot in 15 seconds - press a key on the console to abort
--> Press a key on the console to reboot,
--> or switch off the system now.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1140187537.24445.0.camel>