Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 10 Nov 2000 15:19:41 +0200 (SAST)
From:      Reinier Bezuidenhout <rbezuide@oskar.nanoteq.co.za>
To:        Soren Schmidt <sos@freebsd.dk>
Cc:        stable@FreeBSD.ORG, current@FreeBSD.ORG
Subject:   RE: To those with ATA probe problems
Message-ID:  <XFMail.001110151941.rbezuide@oskar.nanoteq.co.za>
In-Reply-To: <200011101138.MAA41016@freebsd.dk>

next in thread | previous in thread | raw e-mail | index | archive | help

[-- Attachment #1 --]
I applied the diff-5.0 to my current and everything seems to work
ok now :) got my drinks-tray back :)

Unfortunately I dodn't boot vrbose ... but the dmesg is
inlcuded.  Thanks !! :)

Reinier


On 10-Nov-00 Soren Schmidt wrote:
> 
> I've put patches for 4.2-BETA (diff-4.2) and for -current (diff-5.0)
> on ftp://freebsd.dk/pub/ATA
> Please try them and mail me the dmesg from your system.
> 
> Thanks!
> 
> -Søren
> 
> 
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-current" in the body of the message

###################################################################
#                                                                 #
#  R.N. Bezuidenhout                  NetSeq Firewall             #
#  rbezuide@oskar.nanoteq.co.za       http://www.nanoteq.co.za    #  
#                                                                 #
###################################################################

----------------------------------
Date: 10-Nov-00
Time: 15:17:11

This message was sent by XFMail
----------------------------------

[-- Attachment #2 --]
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Fri Nov 10 15:07:57 SAST 2000
    rbezuide@jarrow.nanoteq.co.za:/usr/src/sys/compile/JARROWW
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 399083411 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (399.08-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x653  Stepping = 3
  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory  = 134217728 (131072K bytes)
avail memory = 126595072 (123628K bytes)
Preloaded elf kernel "kernel" at 0xc03ce000.
Preloaded elf module "random.ko" at 0xc03ce09c.
Pentium Pro MTRR support enabled
Using $PIR table, 9 entries at 0xc00fdf30
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x1820-0x182f at device 7.1 on pci0
ata0: mask=03 status0=50 status1=50
probe ATAPI master a=00 b=00
probe ATAPI slave a=14 b=eb
ata0: mask=03 status0=50 status1=00
probe ATA master a=01 b=a5
devices=09
ata0: at 0x1f0 irq 14 on atapci0
ata1: mask=03 status0=50 status1=00
probe ATAPI master a=00 b=00
probe ATAPI slave a=00 b=00
ata1: mask=03 status0=50 status1=00
probe ATA master a=01 b=a5
devices=01
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2 irq 9
pci0: <Intel 82371AB Power management controller> at 7.3
pcm0: <Yamaha DS-1E (YMF740C)> mem 0xf4000000-0xf4007fff irq 11 at device 12.0 on pci0
vr0: <VIA VT3043 Rhine I 10/100BaseTX> port 0x1400-0x147f mem 0xf4009000-0xf400907f irq 11 at device 13.0 on pci0
vr0: Ethernet address: 00:80:c8:92:25:95
miibus0: <MII bus> on vr0
amphy0: <DM9101 10/100 media interface> on miibus0
amphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr1: <VIA VT3043 Rhine I 10/100BaseTX> port 0x1480-0x14ff mem 0xf4009400-0xf400947f irq 9 at device 14.0 on pci0
vr1: Ethernet address: 00:50:ba:a9:26:a3
miibus1: <MII bus> on vr1
amphy1: <DM9101 10/100 media interface> on miibus1
amphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <ATI Mach64-GV graphics accelerator> at 15.0 irq 11
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources
unknown: <PNP0f13> can't assign resources
sio0: <16550A-compatible COM port> at port 0x3f8-0x3ff irq 4 on isa0
sio0: type 16550A
sio1: <16550A-compatible COM port> at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
unknown: <PNP0700> can't assign resources
ppc0: <Standard parallel printer port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
IP packet filtering initialized, divert enabled, rule-based forwarding disabled, default to deny, logging disabled
IPsec: Initialized Security Association Processing.
ata0-master: DMA limited to UDMA33, non-ATA66 compliant cable
ad0: 8063MB <QUANTUM FIREBALL CR8.4A> [16383/16/63] at ata0-master UDMA33
ad2: 1626MB <ST31720A> [3305/16/63] at ata1-master WDMA2
acd0: CDROM <SAMSUNG SC-140B> at ata0-slave using PIO4
Mounting root from ufs:/dev/ad0s2a
link_elf: symbol lminor undefined
/dev/vmmon: Module vmmon: registered with major=200 minor=0 tag=$Name: build-570 $
/dev/vmmon: Module vmmon: initialized
cd9660: Joliet Extension

Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?XFMail.001110151941.rbezuide>