Date: Tue, 8 Jun 2004 17:31:48 -0400 From: Charles Swiger <cswiger@mac.com> To: "Bernt. H" <bernt@bah.homeip.net> Cc: freebsd questions <freebsd-questions@freebsd.org> Subject: [OT] Re: Leaving a server on all day Message-ID: <3F7DF4CB-B993-11D8-8148-003065ABFD92@mac.com> In-Reply-To: <40C62A70.8060102@bah.homeip.net> References: <20040608122101.GA68204@dogma.freebsd-uk.eu.org> <87zn7ednwg.fsf@pele.r.caley.org.uk> <20040608172756.GA70798@dogma.freebsd-uk.eu.org> <20040608135903.024729b8.wmoran@potentialtech.com> <6CCB3AEC-B97C-11D8-8148-003065ABFD92@mac.com> <40C62A70.8060102@bah.homeip.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Jun 8, 2004, at 5:06 PM, Bernt. H wrote:
>> No need to guess, use an amp-meter. :-)
>
> Well If it measure trueRMS then you could use it, otherwise no.
You are correct that one needs to measure the voltage and use the RMS
value, or DC series equivalent if you like that phrase, in order to
figure out the power consumption accurately, but an {ammeter,
amp-meter, DMM} which can deal with AC will do the right thing.
>> Radio Shack and the like will sell something with male and female
>> plugs that will measure both voltage and current, and give you the
>> current power load in Watts. Smart UPSes may also have a similar
>> capability.
>
> Yes but it will only show you the correct value if the load is a pure
> resistans, not if it's reactiv, as all switching psu's are.
The ratio between the actual load and a purely resistive load is known
as the power factor, and is why UPS are rated in terms of kVA rather
than in terms of the wattage of the load. For computer equipment [1],
the power factor is lagging, representing an inductive rather than
capacitive load, and the PF is typically about 0.9.
However, the electric company bills you for the power you draw from
them, they don't give you a refund for the power "wasted" because your
load is not purely resistive, so the notion of measuring the kVA rather
than the "useful wattage" is not really "incorrect".
--
-Chuck
[1]: And almost everything else, too. Most things use a transformer to
convert line voltage into whatever voltage the device wants, which is
inductive, or consist of a motor, also inductive. Motors which draw a
lot of current when starting (which is most of them) tend to have a
"starting capacitor" to help manage the surge current and also help
adjust the power factor back towards 1.0 to improve their efficiency.
The so-called "ballast" in fluorescent lights serves much the same
purpose.
We thank you for tuning in to basic electronics, and return you to your
regularly scheduled FreeBSD programming. :-)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3F7DF4CB-B993-11D8-8148-003065ABFD92>