Date: Wed, 06 Nov 1996 14:01:24 -0500 From: Chris Shenton <cshenton@it.hq.nasa.gov> To: wreynolds@kensco.net Cc: hardware@freebsd.org Subject: Re: SCSI Drivers Message-ID: <199611061901.TAA24696@wirehead.it.hq.nasa.gov> In-Reply-To: Your message of "Wed, 6 Nov 1996 13:32:25 %2B0000" References: <199611061848.NAA06196@ns.kensco.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wed, 6 Nov 1996 13:32:25 +0000
"Earl W Reynolds, Jr." <wreynolds@kensco.net> wrote:
wreynolds> I can't run scanpci because I don't have freebsd running on the
wreynolds> system because it doesn't recognize the disk controller and I can't
wreynolds> get past that part of the installation. Is there any way you could
wreynolds> check your system again and see what the disk controller is?
I can't get at the machine, and I can't say I know what model of
Compaq it is. Here's the scanpci output though; looks like it's an NCR
53C810 SCSI controller, which FreeBSD supports no problem.
If anyone can identify what all this other hardware is, I'd like to
hear it.
Good luck.
root@breadfruit{1} scanpci
PCI says configuration type 2
PCI probing configuration type 1
pci bus 0x0 cardnum 0x00, vendor 0x0e11 device 0x4000
Device unknown
STATUS 0x2200 COMMAND 0x0147
CLASS 0x06 0x00 0x00 REVISION 0x00
BIST 0x00 HEADER 0xff LATENCY 0x20 CACHE 0x00
BASE0 0x00f59910 addr 0x00f59910 MEM
BASE1 0x00584fe0 addr 0x00584fe0 MEM
BASE2 0x00842030 addr 0x00842030 MEM
BASE3 0x00582020 addr 0x00582020 MEM
BASE4 0x40000e11 addr 0x40000e10 I/O
BASE5 0x22000147 addr 0x22000144 I/O
BASEROM 0x00842070 addr 0x00840000 not-decode-enabled
MAX_LAT 0x00 MIN_GNT 0x84 INT_PIN 0x20 INT_LINE 0xb0
pci bus 0x0 cardnum 0x0b, vendor 0x1022 device 0x2000
AMD 79C970 Lance
STATUS 0x0200 COMMAND 0x0080
CLASS 0x02 0x00 0x00 REVISION 0x02
BASE0 0x00000001 addr 0x00000000 I/O
MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x02 INT_LINE 0xff
pci bus 0x0 cardnum 0x0c, vendor 0x1000 device 0x0001
NCR 53C810
STATUS 0x0200 COMMAND 0x0000
CLASS 0x01 0x00 0x00 REVISION 0x02
BASE0 0x00000001 addr 0x00000000 I/O
MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x01 INT_LINE 0xff
pci bus 0x0 cardnum 0x0f, vendor 0x0e11 device 0x0001
Device unknown
STATUS 0x0200 COMMAND 0x0147
CLASS 0x06 0x02 0x00 REVISION 0x07
PCI probing configuration type 2
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199611061901.TAA24696>