Date: Thu, 28 Aug 2003 07:37:24 +0800 From: David Xu <davidxu@FreeBSD.org> To: freebsd-current@FreeBSD.org Subject: Recent sound change still broken? Message-ID: <200308280737.24133.davidxu@FreeBSD.org>
next in thread | raw e-mail | index | archive | help
My patch http://www.FreeBSD.org/cgi/query-pr.cgi?pr=kern/54810 ever worked well for my old Creative sound card, the device is probed, but now no sound at all. :-( dmesg: Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT #0: Thu Aug 28 06:44:25 CST 2003 davidxu@tiger.my:/home/davidxu/src/sys/i386/compile/mpnw Preloaded elf kernel "/boot/kernel/kernel" at 0xc04a7000. Preloaded elf module "/boot/kernel/snd_es137x.ko" at 0xc04a71f4. Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc04a72a4. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel Pentium III (999.67-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x68a Stepping = 10 Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE> real memory = 805240832 (767 MB) avail memory = 776982528 (740 MB) Programming 24 pins in IOAPIC #0 IOAPIC #0 intpin 2 -> irq 0 FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x00178011, at 0xfec00000 Pentium Pro MTRR support enabled npx0: <math processor> on motherboard npx0: INT 16 interface pcibios: BIOS version 2.10 Using $PIR table, 8 entries at 0xc00fdda0 pcib0: <Host to PCI bridge> at pcibus 0 on motherboard pci0: <PCI bus> on pcib0 IOAPIC #0 intpin 11 -> irq 2 IOAPIC #0 intpin 10 -> irq 5 agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem 0xf0000000-0xf3ffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C686B UDMA100 controller> port 0xa000-0xa00f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <VIA 83C572 USB controller> port 0xa400-0xa41f irq 2 at device 7.2 on pci0 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ugen0: OmniVision OV511+ Camera, rev 1.00/1.00, addr 2 uhci1: <VIA 83C572 USB controller> port 0xa800-0xa81f irq 2 at device 7.3 on pci0 usb1: <VIA 83C572 USB controller> on uhci1 usb1: USB revision 1.0 uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered pci0: <bridge, PCI-unknown> at device 7.4 (no driver attached) fxp0: <Intel 82557 Pro/100 Ethernet> port 0xb800-0xb81f mem 0xf7000000-0xf70fffff,0xf7100000-0xf7100fff irq 2 at device 11.0 on pci0 fxp0: Ethernet address 00:a0:c9:5a:41:98 miibus0: <MII bus> on fxp0 nsphy0: <DP83840 10/100 media interface> on miibus0 nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pcm0: <Creative SB AudioPCI CT4730> port 0xc000-0xc01f,0xbc00-0xbc3f irq 5 at device 12.0 on pci0 pcm0: <Creative EV1938 AC97 Codec> orm0: <Option ROM> at iomem 0xc0000-0xc8fff on isa0 pmtimer0 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 unknown: <PNP0303> can't assign resources (port) unknown: <PNP0f13> can't assign resources (irq) unknown: <PNP0700> can't assign resources (port) unknown: <PNP0501> can't assign resources (port) unknown: <PNP0501> can't assign resources (port) unknown: <PNP0400> can't assign resources (port) APIC_IO: Testing 8254 interrupt delivery APIC_IO: routing 8254 via IOAPIC #0 intpin 2 Timecounters tick every 10.000 msec ad0: 57241MB <ST360021A> [116301/16/63] at ata0-master UDMA100 ata1-slave: FAILURE - ATA_IDENTIFY status=51<READY,DSC,ERROR> error=4<ABORTED> acd0: CDROM <ATAPI-CD ROM-DRIVE-52MAX> at ata1-master PIO4 SMP: AP CPU #1 Launched! Mounting root from ufs:/dev/ad0s3a drm0: <ATI Radeon QM R200 9100> port 0x9000-0x90ff mem 0xf5000000-0xf500ffff,0xe8000000-0xefffffff irq 2 at device 0.0 on pci1 info: [drm] AGP at 0xf0000000 64MB info: [drm] Initialized radeon 1.9.0 20020828 on minor 0 info: [drm] Loading R200 Microcode -- David Xu
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200308280737.24133.davidxu>