Date: Sat, 03 Jan 2004 22:55:51 -0500 From: Mike Jeays <Mike.Jeays@rogers.com> To: freebsd-questions <freebsd-questions@freebsd.org> Subject: Re: Failure to probe devices Message-ID: <3FF78EC7.2070007@rogers.com> References: <3FF6E6AB.5000504@rogers.com> <44k748j48o.fsf@be-well.ilk.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Lowell Gilbert wrote:
>Mike Jeays <Mike.Jeays@rogers.com> writes:
>
>
>
>>I have a Pentium 4 1.8 Ghz on an ASUS P4S533 motherboard. FreeBSD
>>5.1 fails to install - it just hangs while probing for devices, and I
>>left it for
>>many minutes. There is no ZIP or JAZZ drive; just an IDE disk and
>>an LG CD-RW drive.
>>
>>This machine installs and runs FreeBSD 4.7 with no problems, and the CD
>>for 5.1 has been used successfully on other machines. Any clues, please?
>>
>>
>
>You don't provide much information here -- particularly for an "early
>adopters only" version of the OS.
>
>Does this still occur with 5.2?
>Did the suggestions in the 5.1-RELEASE errata help? Or even change
> anything at all?
>
>
>
I am not sure what else there is to post. The machine gets to the point
where
it says something like "Probing devices - this may take a while", and then
nothing else happens. I read the 5.1 errata, and tried switching from APIC
to PIC, and disabling the on-board sound card, but this made no difference.
Thanks for the reply.
Here is the dmesg output, using 4.7:
101 /usr/home/mike$ dmesg
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.7-RELEASE #1: Wed Jan 1 21:41:02 EST 2003
mike@chaucer:/usr/src/sys/compile/CHAUCER
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium 4 (1816.18-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf24 Stepping = 4
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,<b28>,ACC>
real memory = 536854528 (524272K bytes)
avail memory = 517021696 (504904K bytes)
Preloaded elf kernel "kernel" at 0xc0534000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 10 entries at 0xc00f1b20
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <PCI to PCI bridge (vendor=1039 device=0001)> at device 1.0 on pci0
pci1: <PCI bus> on pcib2
pci1: <NVidia model 0171 graphics accelerator> at 0.0 irq 3
isab0: <PCI to ISA bridge (vendor=1039 device=0961)> at device 2.0 on pci0
isa0: <ISA bus> on isab0
ohci0: <SiS 5571 USB controller> mem 0xe6800000-0xe6800fff irq 11 at
device 2.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xe6000000-0xe6000fff irq 10 at
device 2.3 on pci0
usb1: OHCI version 1.0, legacy support
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
atapci0: <SiS 5591 ATA33 controller> port 0xd800-0xd80f at device 2.5 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pcm0: <CMedia CMI8738> port 0xa800-0xa8ff irq 5 at device 5.0 on pci0
rl0: <RealTek 8139 10/100BaseTX> port 0xa400-0xa4ff mem
0xe5000000-0xe50000ff irq 7 at device 10.0 on pci0
rl0: Ethernet address: 00:50:fc:72:7b:74
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sio0: <3COM PCI FaxModem> port 0xa000-0xa007 irq 9 at device 11.0 on pci0
sio0: moving to sio4
sio4: type 16550A
pcib1: <SiS 5591 host to AGP bridge> on motherboard
pci2: <PCI bus> on pcib1
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 38172MB <MAXTOR 6L040J2> [77557/16/63] at ata0-master UDMA33
acd0: CD-RW <HL-DT-ST GCE-8320B> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
102 /usr/home/mike$
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3FF78EC7.2070007>