Date: Sat, 14 Feb 2009 09:41:17 -0600 From: Rick Romero <admin@vfemail.net> To: freebsd-hardware@freebsd.org Subject: Re: Areca 1200 controller panics 7.1 Message-ID: <1234626078.5736.121.camel@rickxp>
next in thread | raw e-mail | index | archive | help
Me Too! I have TWO identical systems with Asus M3A78-CM Motherboards, and an ARC-1200 in each that is having this problem. Removing that controller allows the install CD to boot. Merely removing the drives from the controller does not. I've upgraded the BIOS, moved the controller to another slot, futzed in the BIOS (disabling/enabling,etc) - to no avail. I also upgraded the controller BIOS. I've booted 7.0R, 7.1R, 8.0Current(12/08), and 6.4R. 6.4R just 'hangs' at 'Waiting 5 seconds for SCSI devices to settle' (which is just before the kernel dump on 7 and 8), the rest crash with the below error. Obviously 8.0 has more data, but the jist is the same. I also found this link from 2007 which seems similar: http://unix.derkeiler.com/Mailing-Lists/FreeBSD/stable/2007-04/msg00237.html Thoughts? suggestions? If you would like more info, I'd be happy to provide it. The controller has worked fine in OpenSolaris 2008.11, and I booted Ubuntu 8.10 for giggles and it worked there as well. Should I install onto a MotherBoard connected disk, then plug in the areca? Would that provide a dump point to get you guys more data? I want the areca as RAID 1 boot, and the SATA connected to the motherboard as JBOD for ZFS (hence the OpenSolaris above). Rick ---------------------------------------------- Attachment not getting throuh. Panic transcribed below. /Eirik On Jan 21, 2009, at 20:53, Eirik Øverby wrote: > Hi folks, > > see attached screenshot for panic screen. This happens when booting > from 7.1-release CD. The box is a Sun X2200 M2, the controller is a > 2-port SATA-II controller with 128mb cache memory. One drive is set > as single drive (RAID-0), another as passthrough (to get hold of > some data from pre-areca times). > > Another Areca controller in another box (different controller model > (4-chan sata) and box (tyan transport)) works just fine. > > Input welcome. > > /Eirik (probe16:arcmsr0:0:16:0): inquiry data fails comparison at DV1 step arcmsr0: isr get an illegal srb command doneacb=´0xffffffff8124e000´ srb=0xffff ffffaeb6c420´ srbacb=´0xffffffff8124e000´ startdone=0x3c3csrboutstandingcount=-1 Fatal trap 12: page fault while in kernel mode cpuid = 0; apic id = 00 fault virtual address = 0x34be2988 fault code = supervisor read data, page not present instruction pointer = 0x8:0xffffffff807914c3 stack pointer = 0x10:0xffffffffaecaab60 frame pointer = 0x10:0xffffffff8124e000 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, long 1, def32 0, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 36 (irq17: arcmsr0) trap number = 12 panic: page fault
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1234626078.5736.121.camel>