Date: Mon, 21 Mar 2005 21:01:30 -0800 From: Andrew Robinson <andrewr@uidaho.edu> To: hackers@freebsd.org Cc: Kevin Kinsey <kdk@daleco.biz> Subject: NIC detected, but won't DHCP or configure Message-ID: <c333e9c36a8d.c36a8dc333e9@uidaho.edu>
next in thread | raw e-mail | index | archive | help
Dear FreeBSD hackers, I posted the following question on freebsd-questions. Two kind souls kicked it around for a little and suggested that I pass it on to you. I have a laptop with a netowrk card that seems to be successfully detected under FreeBSD, Knoppix, and WinXP, but will only work under Knoppix and WinXP. I tender the following for your information. Windows identifies the card as Realtek RTL8169/8110 Family Gigabit Ethernet NIC. scanpci and pciconf (see below) seem to agree. Under FreeBSD: dmesg: >Copyright (c) 1992-2004 The FreeBSD Project. >Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. >FreeBSD 5.3-RELEASE #0: Mon Mar 21 17:27:06 PST 2005 > root@brutus.for.uidaho.edu:/usr/obj/usr/src/sys/MYKERNEL >Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a22000. >Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a22294. >Calibrating clock(s) ... i8254 clock: 1193250 Hz >CLK_USE_I8254_CALIBRATION not specified - using default frequency >Timecounter "i8254" frequency 1193182 Hz quality 0 >Calibrating TSC clock ... TSC clock: 3391516719 Hz >CPU: Intel(R) Pentium(R) 4 CPU 3.40GHz (3391.52-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0xf43 Stepping = 3 > > <snip> Here is where the boot sequence detects the 10/100/1000 NIC: ========================================= >pcib2: slot 3 INTA hardwired to IRQ 21 >found-> vendor=0x10ec, dev=0x8169, revid=0x10 > bus=10, slot=3, func=0 > class=02-00-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) > intpin=a, irq=21 > powerspec 2 supports D0 D1 D2 D3 current D0 > map[10]: type 1, range 32, base b3006000, size 13, memory disabled >pcib2: device (null) requested decoded memory range 0xb3006000-0xb3007fff >pcib2: matched entry for 10.5.INTA > > Here is where the 802.11 device is detected: ============================== >pcib2: slot 5 INTA hardwired to IRQ 17 >found-> vendor=0x1814, dev=0x0201, revid=0x01 > bus=10, slot=5, func=0 > class=02-80-00, hdrtype=0x00, mfdev=0 > cmdreg=0x0000, statreg=0x0410, cachelnsz=0 (dwords) > lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) > intpin=a, irq=17 > powerspec 2 supports D0 D3 current D0 >cbb0: <TI1410 PCI-CardBus Bridge> at device 0.0 on pci10 >pcib2: device cbb0 requested decoded memory range 0xb3000000-0xb30fffff >cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xb3008000 >cardbus0: <CardBus bus> on cbb0 >pccard0: <16-bit PCCard bus> on cbb0 >pcib2: matched entry for 10.0.INTA >pcib2: slot 0 INTA hardwired to IRQ 18 >cbb0: [MPSAFE] > ifconfig -a output is: ============== fwe0: flags=108802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500 options=8<VLAN_MTU> ether 02:90:f5:40:24:d8 ch 1 dma -1 plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500 lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet 127.0.0.1 netmask 0xff000000 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 pciconf -lv output is: ============== none4@pci10:3:0: class=0x020000 card=0x09001558 chip=0x816910ec rev=0x10 hdr=0x00 vendor = 'Realtek Semiconductor' device = 'RTL8169 Gigabit Ethernet Adapter' class = network subclass = ethernet none5@pci10:5:0: class=0x028000 card=0x68331462 chip=0x02011814 rev=0x01 hdr=0x00 vendor = 'Ralink Technology Corp' class = network scanpci output is: ============= pci bus 0x0000 cardnum 0x00 function 0x00: vendor 0x8086 device 0x2580 Intel Corp. Device unknown pci bus 0x0000 cardnum 0x01 function 0x00: vendor 0x8086 device 0x2581 Intel Corp. Device unknown pci bus 0x0000 cardnum 0x1b function 0x00: vendor 0x8086 device 0x2668 Intel Corp. Device unknown pci bus 0x0000 cardnum 0x1d function 0x00: vendor 0x8086 device 0x2658 Intel Corp. Device unknown pci bus 0x0000 cardnum 0x1d function 0x01: vendor 0x8086 device 0x2659 Intel Corp. Device unknown pci bus 0x0000 cardnum 0x1d function 0x02: vendor 0x8086 device 0x265a Intel Corp. Device unknown pci bus 0x0000 cardnum 0x1d function 0x03: vendor 0x8086 device 0x265b Intel Corp. Device unknown pci bus 0x0000 cardnum 0x1d function 0x07: vendor 0x8086 device 0x265c Intel Corp. Device unknown pci bus 0x0000 cardnum 0x1e function 0x00: vendor 0x8086 device 0x244e Intel Corp. 82801BA/CA/DB/EB PCI Bridge pci bus 0x0000 cardnum 0x1f function 0x00: vendor 0x8086 device 0x2640 Intel Corp. Device unknown pci bus 0x0000 cardnum 0x1f function 0x01: vendor 0x8086 device 0x266f Intel Corp. Device unknown pci bus 0x0000 cardnum 0x1f function 0x03: vendor 0x8086 device 0x266a Intel Corp. Device unknown pci bus 0x0001 cardnum 0x00 function 0x00: vendor 0x10de device 0x00c8 nVidia Corporation Device unknown pci bus 0x000a cardnum 0x00 function 0x00: vendor 0x104c device 0xac50 Texas Instruments PCI1410 PC card Cardbus Controller pci bus 0x000a cardnum 0x01 function 0x00: vendor 0x104c device 0x8023 Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) pci bus 0x000a cardnum 0x02 function 0x00: vendor 0x105a device 0x3373 Promise Technology, Inc. Device unknown pci bus 0x000a cardnum 0x03 function 0x00: vendor 0x10ec device 0x8169 Realtek Semiconductor Co., Ltd. RTL-8169 pci bus 0x000a cardnum 0x05 function 0x00: vendor 0x1814 device 0x0201 Device unknown I hope that this is sufficient information to be useful. I would appreciate any advice or thoughts. Please cc me as I am on digest mode for the listserv. Best wishes Andrew
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?c333e9c36a8d.c36a8dc333e9>