Date: Wed, 14 Mar 2001 17:36:21 -0800 From: "Brett G. Lemoine" <bl@incyte.com> To: freebsd-stable@freebsd.org Subject: 4.3-beta spits PCI errors when sound file played (sound from cd ok) Message-ID: <200103150136.RAA106453@blah.incyte.com>
next in thread | raw e-mail | index | archive | help
I've a -stable system, updated as of this morning, that's spewing errors
when I play an mp3 file from disk.
Mar 14 18:36:00 blur /kernel: ahc1: PCI error Interrupt at seqaddr = 0x9
Mar 14 18:36:00 blur /kernel: ahc1: Data Parity Error Detected during address or
write data phase
Mar 14 18:36:00 blur /kernel: ahc0: PCI error Interrupt at seqaddr = 0x9
Mar 14 18:36:00 blur /kernel: ahc0: Data Parity Error Detected during address or
write data phase
Mar 14 18:36:00 blur /kernel: ahc1: PCI error Interrupt at seqaddr = 0x9
Mar 14 18:36:00 blur /kernel: ahc1: Data Parity Error Detected during address or
write data phase
Mar 14 18:36:00 blur /kernel: ahc0: PCI error Interrupt at seqaddr = 0x8
Mar 14 18:36:00 blur /kernel: ahc0: Data Parity Error Detected during address or
write data phase
[...] and so-on for a few hundred lines.
I'll admit that this is _far_ better than what 4.2-stable was doing,
which was crashing with something like:
(da1:ahc0:0:1:0): Invalidating pack
(da1:ahc0:0:1:0): SCB 0x1d - timed out while idle, SEQADDR == 0x5
STACK == 0x13, 0x174, 0x15e, 0x174
SXFRCTL0 == 0x80
SCB count = 110
QINFIFO entries: 34 18 46 1 19 31 52 20 33 9 3 67 57 45 0 30 54 22 50 40 23 8 36
2 32 44 35 5 17 11 28 10 101 15 51 26 6
Waiting Queue entries: 11:66
Disconnected Queue entries: 17:39 27:29
QOUTFIFO entries:
Sequencer Free SCB List: 20 2 0 28 14 10 29 31 15 24
7 19 6 23 18 21 12 26 13 22 4 30 9 3 16 8 25 1 5
Pending list: 6 26 51 15 101 10 28 11 17 5 35 44 32
2 36 8 23 40 50 22 54 30 0 45 57 67 3 9 33 20 52 31 19 1 46 18 34 66 39 29
Kernel Free SCB list: 24 58 25 47 59 55 27 42 4 49 3
8 37 43 21 41 53 48 16 12 69 56 68 13 83 14 82 81 80 99 98 97 96 95 94 93 92 91
90
109 108 107 106 105 104 103 102 65 84 85 86 87 88 89 70 71 72 73 74 75 76 77 78
7
9 60 61 62 63 64 100
sg[0] - Addr 0x1a608800 : Length 1024
(da1:ahc0:0:1:0): SCB 29: Immediate reset. Flags =
0x4040
(da1:ahc0:0:1:0): no longer in timeout, status = 34b
ahc0: Issued Channel A Bus Reset. 40 SCBs aborted
My current kernel is GENERIC v1.246.2.23 (2001/03/07) with 'device pcm'
tacked on.
My dmesg is below. Any ideas? Is there anything else I could do
to help pin this thing down?
It's not a _simple_ conflict, since I can play cd's direct out the
sound driver without any problems. It's just when I play an mp3 or
wav off of disk. Weird.
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-BETA #0: Wed Mar 14 18:08:30 CST 2001
root@blur.unixshaman.com:/usr/src/sys/compile/GENSND
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (751.71-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x681 Stepping = 1
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 1073741824 (1048576K bytes)
config> di sn0
config> di lnc0
config> di ie0
config> di fe0
config> di ed0
config> di cs0
config> di bt0
config> di aic0
config> di aha0
config> di adv0
config> q
avail memory = 1041117184 (1016716K bytes)
Preloaded elf kernel "kernel" at 0xc049c000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc049c09c.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443GX host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <Intel 82443GX (440 GX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib2
pcib3: <PCI to PCI bridge (vendor=1011 device=0023)> at device 1.0 on pci1
pci2: <PCI bus> on pcib3
pci2: <S3 Savage 4 graphics accelerator> at 1.0
pci2: <S3 Savage 4 graphics accelerator> at 2.0
pci2: <S3 Savage 4 graphics accelerator> at 3.0
pci2: <S3 Savage 4 graphics accelerator> at 4.0
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xffa0-0xffaf at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xef80-0xef9f irq 11 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
chip1: <Intel 82371AB Power management controller> port 0x440-0x44f at device 7.3 on pci0
ahc0: <Adaptec aic7896/97 Ultra2 SCSI adapter> port 0xe400-0xe4ff mem 0xfebfe000-0xfebfefff irq 10 at device 11.0 on pci0
aic7896/97: Wide Channel A, SCSI Id=7, 32/255 SCBs
ahc1: <Adaptec aic7896/97 Ultra2 SCSI adapter> port 0xe800-0xe8ff mem 0xfebff000-0xfebfffff irq 10 at device 11.1 on pci0
aic7896/97: Wide Channel B, SCSI Id=7, 32/255 SCBs
pcm0: <AudioPCI ES1371> port 0xef00-0xef3f irq 9 at device 12.0 on pci0
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xee80-0xeebf mem 0xfea00000-0xfeafffff,0xfebfd000-0xfebfdfff irq 11 at device 13.0 on pci0
fxp0: Ethernet address 00:e0:81:10:c9:0e
fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0xed80-0xedbf mem 0xfe800000-0xfe8fffff,0xfebfc000-0xfebfcfff irq 5 at device 17.0 on pci0
fxp1: Ethernet address 00:d0:b7:73:39:03
pcib1: <Intel 82443GX host to AGP bridge> on motherboard
pci3: <PCI bus> on pcib1
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: IEEE1284 device found /NIBBLE
Probing for PnP devices on ppbus0:
ppbus0: <Hewlett-Packard HP LaserJet 5MP> HP ENHANCED PCL5,PJL,POSTSCRIPT
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
acd0: CDROM <TOSHIBA CD-ROM XM-6702B> at ata1-master using PIO4
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s1a
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST318404LW 0002> Fixed Direct Access SCSI-3 device
da0: 80.000MB/s transfers (40.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da0: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <SEAGATE ST318404LW 0002> Fixed Direct Access SCSI-3 device
da1: 80.000MB/s transfers (40.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da1: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
da2 at ahc1 bus 0 target 6 lun 0
da2: <iomega jaz 2GB E.17> Removable Direct Access SCSI-2 device
da2: 20.000MB/s transfers (20.000MHz, offset 15)
da2: 1911MB (3915600 512 byte sectors: 255H 63S/T 243C)
cd0 at ahc1 bus 0 target 5 lun 0
cd0: <YAMAHA CRW8424S 1.0j> Removable CD-ROM SCSI-2 device
cd0: 20.000MB/s transfers (20.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
bl
--
//====== Brett G. Lemoine -=- <bl@incyte.com> ===============================\\
|| Info. Systems Architect | ||
||Core Unix System Services| Managing systems administrators ||
|| Incyte Genomics | is alot like hearding cats. ||
|| Palo Alto, California | ||
|+-------------------------+-------------------------------------------------+|
\\== PGP Key Fingerprint: 68 A1 2A 2D 82 CE E9 70 5B 80 D1 11 EC F3 FB 85 ==//
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200103150136.RAA106453>