Date: Tue, 16 Dec 2003 13:10:57 -0500 From: Barney Wolff <barney@databus.com> To: Kay Lehmann <kay_lehmann@web.de> Cc: freebsd-current@freebsd.org Subject: Re: once again 5.2 RC and watchdog timeout Message-ID: <20031216181057.GA27269@pit.databus.com> In-Reply-To: <3FDF3F89.9000302@web.de> References: <3FD742DD.70803@web.de> <20031210104822.J34418@carver.gumbysoft.com> <3FDF3F89.9000302@web.de>
next in thread | previous in thread | raw e-mail | index | archive | help
--jRHKVT23PllUwdXP Content-Type: text/plain; charset=us-ascii Content-Disposition: inline On Tue, Dec 16, 2003 at 06:23:21PM +0100, Kay Lehmann wrote: > Since nobody help me till now, I need to try it once again. The problem > is still here and I can't get 5.2-rc work properly. I tried one more > card but it did not help. Disabling acpi ends in a system freeze. boot > -v says it tries to set hostname and I have to use the powerswitch to > shut it down. Does anybody could tell me how to handle this, which > information is needed? I'm using -current with no trouble on an Asus A7M266-D with both ATA and SCSI, and em and fxp cards. I've never tried disabling ACPI - why do you think you need to? Kernel config attached, in case you can spot some difference from yours. -- Barney Wolff http://www.databus.com/bwresume.pdf I'm available by contract or FT, in the NYC metro area or via the 'Net. --jRHKVT23PllUwdXP Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=LAB # # GENERIC -- Generic kernel configuration file for FreeBSD/i386 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.376 2003/02/13 22:24:43 obrien Exp $ machine i386 cpu I686_CPU ident LAB maxusers 0 #To statically compile in device wiring instead of /boot/device.hints #hints "GENERIC.hints" #Default places to look for devices. makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols options SCHED_4BSD #4BSD scheduler options INET #InterNETworking #options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options SOFTUPDATES #Enable FFS soft updates support options UFS_ACL #Support for access control lists options UFS_DIRHASH #Improve performance on big directories options NFSCLIENT #Network Filesystem Client options NFSSERVER #Network Filesystem Server options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options PROCFS #Process filesystem (requires PSEUDOFS) options PSEUDOFS #Pseudo-filesystem framework options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options COMPAT_FREEBSD4 #Compatible with FreeBSD4 options SCSI_DELAY=10000 #Delay (in ms) before probing SCSI options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options AHC_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~128k to driver. # Debugging for use in -current options DDB #Enable the kernel debugger #options INVARIANTS #Enable calls of extra sanity checking #options INVARIANT_SUPPORT #Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS #Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN #Don't run witness on spinlocks for speed # To make an SMP kernel, the next two are needed options SMP # Symmetric MultiProcessor Kernel device apic # the option formerly known as APIC_IO device isa device pci # Floppy drives device fdc # ATA and ATAPI devices device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives device atapist # ATAPI tape drives device atapicam # SCSI emulation options ATA_STATIC_ID #Static device numbering # SCSI Controllers device ahc # AHA2940 and onboard AIC7xxx devices options AHC_ALLOW_MEMIO # SCSI peripherals device scbus # SCSI bus (required) device ch # SCSI media changers device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) device ses # SCSI Environmental Services (and SAF-TE) # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc # AT keyboard controller device atkbd # AT keyboard device psm # PS/2 mouse device vga # VGA video card driver device splash # Splash screen and screen saver support # syscons is the default console driver, resembling an SCO console device sc # Enable this for the pcvt (VT220 compatible) console driver #device vt #options XSERVER # support for X server on a vt console #options FAT_CURSOR # start with block cursor device agp # support several AGP chipsets # Floating point support - do not disable. device npx # Power management support (see NOTES for more options) #device apm # Add suspend/resume support for the i8254. device pmtimer # Serial (COM) ports device sio # 8250, 16[45]50 based serial ports # Parallel port device ppc device ppbus # Parallel port bus (required) device lpt # Printer # PCI Ethernet NICs. device de # DEC/Intel DC21x4x (``Tulip'') device em # Intel PRO/1000 adapter Gigabit Ethernet Card # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support device fxp # Intel EtherExpress PRO/100B (82557, 82558) # Pseudo devices - the number indicates how many units to allocate. device random # Entropy device device loop # Network loopback device ether # Ethernet support device ppp # Kernel PPP device tun # Packet tunnel. device pty # Pseudo-ttys (telnet etc) device md # Memory "disks" # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! device bpf # Berkeley packet filter # USB support device usb device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device ehci device udbp # USB Double Bulk Pipe devices device ugen # Generic device uhid # "Human Interface Devices" device ukbd # Keyboard device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da device ums # Mouse device uscanner # Scanners # # BW adds # options NETGRAPH #netgraph(4) system options IPFIREWALL #firewall options IPFIREWALL_VERBOSE #print information about # dropped packets options IPFIREWALL_VERBOSE_LIMIT=1000 #limit verbosity options IPFIREWALL_DEFAULT_TO_ACCEPT #allow everything by default options IPDIVERT #divert sockets options TCP_DROP_SYNFIN #drop TCP packets with SYN+FIN options AUTO_EOI_1 options AUTO_EOI_2 options PANIC_REBOOT_WAIT_TIME=16 #options DA_OLD_QUIRKS #options USB_DEBUG options DISABLE_PSE options DISABLE_PG_G device acpi options NO_MIXED_MODE device ccd --jRHKVT23PllUwdXP--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20031216181057.GA27269>