Date: Tue, 5 Dec 2000 22:42:28 +0100 From: "Leif Neland" <leifn@neland.dk> To: "Brian Somers" <brian@Awfulhak.org> Cc: <freebsd-current@FreeBSD.ORG>, <brian@Awfulhak.org> Subject: Re: How to debug ppp Message-ID: <02c201c05f04$a12c0b20$0e00a8c0@neland.dk> References: <200011290110.eAT1ADD35445@hak.lan.Awfulhak.org>
next in thread | previous in thread | raw e-mail | index | archive | help
It still doesn't work sometimes. I have a complete log (From dialing to hangup) at http://www.neland.dk/arnold.log My ppp.conf is at http://www.neland.dk/arnold.conf Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: MRU[4] 1500 Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP) Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: MAGICNUM[6] 0xa14dc70c Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: PROTOCOMP[2] Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: ACFCOMP[2] Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: MRRU[4] 1506 Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: ENDDISC[9] MAC 00:10:bc:06:fa:00 Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: 1: LayerStart Dec 5 22:28:28 arnold ppp[55986]: tun0: LCP: 1: State change Stopped --> Ack-Se nt Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: 1: RecvConfigReq(2) state = Ack-Se nt Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: MRU[4] 1500 Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP) Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: MAGICNUM[6] 0xa14dc70c Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: PROTOCOMP[2] Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: ACFCOMP[2] Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: MRRU[4] 1506 Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: ENDDISC[9] MAC 00:10:bc:06:fa:00 Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: 1: SendConfigAck(2) state = Ack-Se nt Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: MRU[4] 1500 Dec 5 22:28:29 arnold ppp[55986]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP) ----- Original Message ----- From: "Brian Somers" <brian@Awfulhak.org> To: "Leif Neland" <leif@neland.dk> Cc: <freebsd-current@FreeBSD.ORG>; <brian@Awfulhak.org> Sent: Wednesday, November 29, 2000 2:10 AM Subject: Re: How to debug ppp > Well, I haven't seen this before !!! > > Your ISP is *insisting* that you negotiate a multi-link connection. > You can do this by simply adding > > set mrru 1506 > > to your config. > > > I sometimes have trouble connecting to my flat-rate isp via i4bsd. > > Most of the time it works, but sometimes the handshake fails. > > What is the log trying to tell me here? What can I tell my isp? > > > > When it fails, I can connect to another isp, which charges per minute > > charges, which I rather not use > > when I have flat rate. > > > > Nov 27 20:48:35 arnold ppp[7461]: tun0: Chat: Phone: xxxxxxxxx > > Nov 27 20:48:35 arnold ppp[7461]: tun0: Phase: 1: Connected! > > Nov 27 20:48:35 arnold ppp[7461]: tun0: Phase: 1: opening -> dial > > Nov 27 20:48:35 arnold ppp[7461]: tun0: Chat: 1: Dial attempt 1 of 2 > > Nov 27 20:48:35 arnold ppp[7461]: tun0: Phase: 1: dial -> carrier > > Nov 27 20:48:36 arnold ppp[7461]: tun0: Phase: 1: /dev/i4brbch0: CD detected > > Nov 27 20:48:36 arnold ppp[7461]: tun0: Phase: 1: carrier -> login > > Nov 27 20:48:36 arnold ppp[7461]: tun0: Phase: 1: login -> lcp > > Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: FSM: Using "1" as a transport > > Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: 1: State change Initial --> > > Closed > > Nov 27 20:48:36 arnold ppp[7461]: tun0: Phase: 1: Entering STOPPED state for > > 2 s > > econds > > Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: 1: State change Closed --> > > Stopped > > Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: 1: RecvConfigReq(1) state = > > Stopped > > > > Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: MRU[4] 1500 > > Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP) > > Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: MAGICNUM[6] 0x08f8f450 > > Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: PROTOCOMP[2] > > Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: ACFCOMP[2] > > Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: MRRU[4] 1506 > > Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: ENDDISC[9] MAC > > 00:10:bc:06:fa:00 > > Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: 1: SendConfigReq(1) state = > > Stopped > > > > Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: MRU[4] 1500 > > Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: MAGICNUM[6] 0x0bde8bbc > > Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: 1: SendConfigRej(1) state = > > Stopped > > > > Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: MRRU[4] 1506 > > Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: 1: LayerStart > > Nov 27 20:48:36 arnold ppp[7461]: tun0: LCP: 1: State change Stopped --> > > Req-Sent > > Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: 1: RecvConfigReq(2) state = > > Req-Sent > > Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: MRU[4] 1500 > > Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP) > > Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: MAGICNUM[6] 0x08f8f450 > > Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: PROTOCOMP[2] > > Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: ACFCOMP[2] > > Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: MRRU[4] 1506 > > Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: ENDDISC[9] MAC > > 00:10:bc:06:fa:00 > > Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: 1: SendConfigRej(2) state = > > Req-Sent > > Nov 27 20:48:37 arnold ppp[7461]: tun0: LCP: MRRU[4] 1506 > > Looping: > > Nov 27 20:48:38 arnold ppp[7461]: tun0: LCP: 1: RecvConfigReq(3) state = > > Req-Sent > > Nov 27 20:48:38 arnold ppp[7461]: tun0: LCP: MRU[4] 1500 > > Nov 27 20:48:38 arnold ppp[7461]: tun0: LCP: AUTHPROTO[4] 0xc023 (PAP) > > Nov 27 20:48:38 arnold ppp[7461]: tun0: LCP: MAGICNUM[6] 0x08f8f450 > > Nov 27 20:48:38 arnold ppp[7461]: tun0: LCP: PROTOCOMP[2] > > Nov 27 20:48:38 arnold ppp[7461]: tun0: LCP: ACFCOMP[2] > > Nov 27 20:48:38 arnold ppp[7461]: tun0: LCP: MRRU[4] 1506 > > Nov 27 20:48:38 arnold ppp[7461]: tun0: LCP: ENDDISC[9] MAC > > 00:10:bc:06:fa:00 > > Nov 27 20:48:38 arnold ppp[7461]: tun0: LCP: 1: SendConfigRej(3) state = > > Req-Sent > > Nov 27 20:48:38 arnold ppp[7461]: tun0: LCP: MRRU[4] 1506 > > Until hangup > > > > Leif > > -- > Brian <brian@Awfulhak.org> <brian@[uk.]FreeBSD.org> > <http://www.Awfulhak.org> <brian@[uk.]OpenBSD.org> > Don't _EVER_ lose your sense of humour ! > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-current" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?02c201c05f04$a12c0b20$0e00a8c0>