Date: Fri, 28 Oct 2005 22:20:16 GMT From: Anton Tolchanov <me@ryzh.kiev.ua> To: freebsd-bugs@FreeBSD.org Subject: Re: kern/77239: [xl] 3Com 3CXFEM656C does not seem to be supported by xl driver, despite HARDWARE.TXT Message-ID: <200510282220.j9SMKG0H005930@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR kern/77239; it has been noted by GNATS. From: Anton Tolchanov <me@ryzh.kiev.ua> To: bug-followup@FreeBSD.org, perryd@llnl.gov Cc: Subject: Re: kern/77239: [xl] 3Com 3CXFEM656C does not seem to be supported by xl driver, despite HARDWARE.TXT Date: Sat, 29 Oct 2005 01:13:37 +0300 > HARDWARE.TXT says that the 3Com CardBus 3CXFEM656C NIC is > supported by the xl driver, but that does not seem to be the case. > I have a Dell Latitude CPx which I installed from a downloaded > ISO. My experience seems to be the same as that of Karel Miklav > (http://lists.freebsd.org/pipermail/freebsd-mobile/2004-October/ > 005103.html). > > The driver seems to read the card, but cannot configure it (from > dmesg): > xl0: <3Com 3c656C Fast Etherlink XL> port 0x1000-0x10ff mem > 0x88000000-0x8800007f,0x88000080-0x880000ff irq 11 at device 0.0 on > cardbus1 > xl0: using memory mapped I/O > xl0: reset didn't complete > xl0: command never completed! > xl0: command never completed! > xl0: eeprom failed to come ready > xl0: failed to read station address > device_attach: xl0 attach returned 6 The following patch works fine for 5.4-RELEASE making 3c656C usable: --- sys/pci/if_xl.c.orig Sat Oct 29 01:08:10 2005 +++ sys/pci/if_xl.c Fri Oct 28 21:49:44 2005 @@ -1273,6 +1273,7 @@ switch (did) { case TC_DEVICEID_BOOMERANG_10_100BT: /* 3c905-TX */ + case TC_DEVICEID_TORNADO_656C: /* 3c656C */ case TC_DEVICEID_HURRICANE_575A: case TC_DEVICEID_HURRICANE_575B: case TC_DEVICEID_HURRICANE_575C: As I can see, it has not been commited into HEAD yet. -- ryzh-uanic
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200510282220.j9SMKG0H005930>