Date: Fri, 02 Dec 2016 15:04:59 +0000 From: bugzilla-noreply@freebsd.org To: freebsd-amd64@FreeBSD.org Subject: [Bug 215007] aacraid hotswapping not working with ASR-81605Z v2 RAID Controller Message-ID: <bug-215007-6@https.bugs.freebsd.org/bugzilla/>
next in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D215007 Bug ID: 215007 Summary: aacraid hotswapping not working with ASR-81605Z v2 RAID Controller Product: Base System Version: 11.0-RELEASE Hardware: amd64 OS: Any Status: New Severity: Affects Only Me Priority: --- Component: kern Assignee: freebsd-bugs@FreeBSD.org Reporter: projet.info@schroeder.lu CC: freebsd-amd64@FreeBSD.org CC: freebsd-amd64@FreeBSD.org I have an ASR-81605Z v2 RAID Controller that I am using in HBA mode. The controller is detected as: aacraid0: <Adaptec RAID Controller> port 0xe000-0xe0ff mem 0xdc100000-0xdc1fffff,0xdc280000-0xdc2803ff irq 16 at device 0.0 on pci1 aacraid0: Enable Raw I/O aacraid0: Enable 64-bit array aacraid0: using MSI-X interrupts (32 vectors) aacraid0: New comm. interface type2 enabled aacraid0: ASR81605Z, aacraid driver 3.2.5-1 aacraidp0 on aacraid0 aacraidp1 on aacraid0 aacraidp2 on aacraid0 aacraidp3 on aacraid0 If I insert one disk: da0 at aacraidp1 bus 0 scbus1 target 0 lun 0 da0: <ATA ST1000NM0033-9ZM SN04> Fixed Direct Access SPC-4 SCSI device da0: Serial Number Z1W49QF1 da0: 300.000MB/s transfers da0: Command Queueing enabled da0: 953869MB (1953525168 512 byte sectors) If I insert a second disk: da0 at aacraidp1 bus 0 scbus1 target 0 lun 0 da0: <ATA ST1000NM0033-9ZM SN04> s/n Z1W49QF1 detached (da0:aacraidp1:0:0:0): Periph destroyed da0 at aacraidp1 bus 0 scbus1 target 0 lun 0 da0: <ATA ST1000NM0033-9ZM SN04> Fixed Direct Access SPC-4 SCSI device da0: Serial Number Z1W49QF1 da0: 300.000MB/s transfers da0: Command Queueing enabled da0: 953869MB (1953525168 512 byte sectors) da1 at aacraidp1 bus 0 scbus1 target 1 lun 0 da1: <ATA ST4000NM0033-9ZM SN04> Fixed Direct Access SPC-4 SCSI device da1: Serial Number Z1Z9P2E2 da1: 300.000MB/s transfers da1: Command Queueing enabled da1: 3815447MB (7814037168 512 byte sectors) The disk da0 is destroyed an recreated which makes hotswapping impossible. Under FreeBSD 10.3 hotswapping is working as I should. Thanks in advance for looking into this. --=20 You are receiving this mail because: You are on the CC list for the bug.=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-215007-6>