Date: Thu, 6 Mar 2014 11:31:53 +0200 From: =?ISO-8859-1?Q?=D6zkan_KIRIK?= <ozkan.kirik@gmail.com> To: Pete Wright <pete@nomadlogic.org> Cc: freebsd-arm <freebsd-arm@freebsd.org> Subject: Re: CompuLab - FreeScale i.MX6 CPU Message-ID: <CAAcX-AGdHtj-jDjtQivCn2shEmFgvrizwhgYD667GzjrjqvTtw@mail.gmail.com> In-Reply-To: <5317AF31.8050408@nomadlogic.org> References: <CAAcX-AGmhDMT2-RXYJxd8QGv_DeaG-dODRV6%2BgkovPTOGuWSow@mail.gmail.com> <5317AF31.8050408@nomadlogic.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Thank you very much Pete. Do you know a two ethernet arm board that works on freebsd? best regards, On Thu, Mar 6, 2014 at 1:11 AM, Pete Wright <pete@nomadlogic.org> wrote: > > > On 03/04/14 23:17, =D6zkan KIRIK wrote: > > Hi, > > > > I am interested with CompuLab Utilite Standart board. ( > > http://utilite-computer.com/web/utilite-models ) > > I saw that over SVN, FreeBSD has i.MX6 cpu support. > > What about drivers of this board? > > > > Does HDMI and NICs works? > > > > Can you suggest a cheap and two ethernet arm board that FreeBSD works. > > > > > hey there Ozkan - I am hacking on getting this working in my minimal > spare time. there are a couple major issues i've run into: > > 1) not really full featured u-boot environment, no usb boot support for > example > > 2) flaky microSD support (had to try out several different cards to find > a working one from sandisk) > > 3) network stack w/in u-boot has been unstable (unable to tftpboot > images due to timeouts) > > the board does have some potential though - but it is not plug-and-play > at this point. having said that - the up side is there is ton's of > opportunity to make an impact on getting support for this device working > in the freebsd-arm community :) > > cheers, > -pete > > -- > Pete Wright > pete@nomadlogic.org > twitter =3D> @nomadlogicLA > > _______________________________________________ > freebsd-arm@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-arm > To unsubscribe, send any mail to "freebsd-arm-unsubscribe@freebsd.org" >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAAcX-AGdHtj-jDjtQivCn2shEmFgvrizwhgYD667GzjrjqvTtw>