Date: Thu, 19 Oct 2000 16:03:00 -0400 From: Josh Tiefenbach <josh@zipperup.org> To: freebsd-mobile@freebsd.org Subject: Experiences with NEWCARD Message-ID: <20001019160300.A81908@zipperup.org>
next in thread | raw e-mail | index | archive | help
--opJtzjQTFsWo+cga Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Since I have this Cardbus card burning a hole in my laptop, I thought I'd try Jonathan Chen's new cardbus code to see what happens. My machine is an HP Omnibook 4150, and I'm trying to use a 3com 3CXFEM656C multifunction card. Results are, shall we say, mixed. The cardbus bridge is probed, and some information is read back from the card, but thats' about it. Somewhat disturbing is the following lines in the dmesg: pccbb0: Cannot attach pccard bus! Interestingly enough, when I boot the laptop into Win2k, it complains miserably that it cant allocate resources for the card. Attached is a full dmesg output and kernel config for your perusing pleasure. I know that i havent compiled in xl support, but thats was mostly on the basis of I'm pretty sure that the pci device id's for the 656 prolly arent in there, and I was hoping to be able to do something like pciconf -l once I booted up to grab them. Anyone have any suggestions? josh -- "Watching those 2 guys [Bush and Gore] debate is like watching Ben Stein read 'The Story of O'" -- Dennis Miller --opJtzjQTFsWo+cga Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg.out" Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #0: Thu Oct 19 15:07:41 GMT 2000 josh@hockey-puck.jrt:/usr/src/sys/compile/LAPTOP-CB Timecounter "i8254" frequency 1193182 Hz CPU: Pentium II/Pentium II Xeon/Celeron (397.05-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x66a Stepping = 10 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> real memory = 201326592 (196608K bytes) avail memory = 192389120 (187880K bytes) Preloaded elf kernel "kernel.cb" at 0xc0343000. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 6 entries at 0xc00fdf80 apm0: <APM BIOS> on motherboard apm0: found APM BIOS v1.2, connected at v1.2 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on motherboard pci0: <PCI bus> on pcib0 pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <NeoMagic MagicMedia 256AV SVGA controller> at 0.0 irq 9 pci1: <NeoMagic MagicMedia 256AX Audio controller> at 0.1 irq 10 pccbb0: <TI1220 PCI-CardBus Bridge> at device 4.0 on pci0 pccbb0: PCI Memory allocated: 18020000 pci_cfgintr: 0:4:A routed to irq 11 cardbus0: <Cardbus bus (newcard)> on pccbb0 pccbb0: Cannot attach pccard bus! pccbb1: <TI1220 PCI-CardBus Bridge> at device 4.1 on pci0 pccbb1: PCI Memory allocated: 18021000 pci_cfgintr: 0:4:B routed to irq 11 cardbus1: <Cardbus bus (newcard)> on pccbb1 pccbb1: Cannot attach pccard bus! isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0xfcf0-0xfcff at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2 irq 10 pci0: <Intel 82371AB Power management controller> at 7.3 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 pmtimer0 on isa0 ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 unknown: <PNP0303> can't assign resources unknown: <PNP0501> can't assign resources pcm0: <Neomagic 256AV (non-ac97)> at port 0x220-0x22f,0x530-0x537,0x388-0x38f,0x120-0x121 irq 5 drq 1,0 on isa0 unknown: <PNP0f13> can't assign resources unknown: <PNP0700> can't assign resources IPsec: Initialized Security Association Processing. IP Filter: v3.4.9 initialized. Default = pass all, Logging = enabled ad0: 9590MB <IBM-DCXA-210000> [19485/16/63] at ata0-master UDMA33 acd0: DVD-ROM <MATSHITADVD-ROM SR-8173> at ata1-master using PIO4 Mounting root from ufs:/dev/ad0s2a pccbb1: card inserted: event=0x0000000e, state=30000820 pccbb1: pccbb_power: CARD_VCC_3V and CARD_VPP_UC [1] cardbus1: reading CIS data from configuration space Product version: 5.0 Product name: 3Com Corporation | 3CXFEM656C-LAN | LAN | 1 | Manufacturer ID: 02016465 Functions: Network Adaptor, Multi-Functioned TUPLE: DEVICE_OC [2]: 02 ff cardbus1: Opening BAR: type=MEM, bar=10, len=0080 cardbus1: Opening BAR: type=MEM, bar=14, len=0100 TUPLE: CONFIG_CB [6]: 03 01 00 00 00 00 TUPLE: CFTABLE_ENTRY_CB [15]: 41 ba 01 35 1e 01 b5 1e 02 30 f8 7f 04 01 02 TUPLE: Unknown(0x7f) [255]: 0x00: ff ff 7f ff ff ff 7f ff ff ff 7f ff ff ff 7f ff 0x10: ff ff 7f ff ff ff 7f ff ff ff 7f ff ff ff 7f ff 0x20: ff ff 7f ff ff ff 7f ff ff ff 7f ff ff ff 7f ff 0x30: ff ff 7f ff ff ff 7f ff ff ff 7f ff ff ff 7f ff 0x40: ff ff 7f ff ff ff 7f ff ff ff 7f ff ff ff 7f ff 0x50: ff ff 7f ff ff ff 7f ff ff ff 7f ff ff ff 7f ff 0x60: ff ff 7f ff ff ff 7f ff ff ff 7f ff ff ff 7f ff 0x70: ff ff 7f ff ff ff 7f ff ff ff 7f ff ff ff 7f ff 0x80: ff ff 7f ff ff ff 7f ff ff ff 7f ff ff ff 7f ff 0x90: ff ff 7f ff ff ff 7f ff ff ff 7f ff ff ff 7f ff 0xa0: ff ff 7f ff ff ff 7f ff ff ff 7f ff ff ff 7f ff 0xb0: ff ff 7f ff ff ff 7f ff ff ff 7f ff ff ff 7f ff 0xc0: ff ff 7f ff ff ff 7f ff ff ff 7f ff ff ff 7f ff 0xd0: ff ff 7f ff ff ff 7f ff ff ff 7f ff ff ff 7f ff 0xe0: ff ff 7f ff ff ff 7f ff ff ff 7f ff ff ff 7f ff 0xf0: ff ff 7f ff ff ff 7f ff ff ff 7f ff ff ff 7f cardbus1: <unknown card> (vendor=0x10b7, dev=0x6564) at 0.0 irq 0 cardbus1: reading CIS data from configuration space Product version: 5.0 Product name: 3Com Corporation | 3CXFEM656C-MDM | MDM | 1 | Manufacturer ID: 02016565 Functions: Serial Port, Multi-Functioned TUPLE: DEVICE_OC [2]: 02 ff cardbus1: Opening BAR: type=MEM, bar=18, len=1000 TUPLE: CONFIG_CB [6]: 03 01 00 00 00 00 TUPLE: CFTABLE_ENTRY_CB [14]: 41 b2 01 35 1e 01 b5 1e 30 f8 ff 08 01 02 Function Extension: 011f3f000400000400 Function Extension: 0206003f1c03030f060000ff Function Extension: 1306000f006a00ff Function Extension: 2306000f000200ff TUPLE: Unknown(0x7f) [255]: 0x00: ff ff 7f ff ff ff 7f ff ff ff 7f ff ff ff 7f ff 0x10: ff ff 7f ff ff ff 7f ff ff ff 7f ff ff ff 7f ff 0x20: ff ff 7f ff ff ff 7f ff ff ff 7f ff ff ff 7f ff 0x30: ff ff 7f ff ff ff 7f ff ff ff 7f ff ff ff 7f ff 0x40: ff ff 7f ff ff ff 7f ff ff ff 7f ff ff ff 7f ff 0x50: ff ff 7f ff ff ff 7f ff ff ff 7f ff ff ff 7f ff 0x60: ff ff 7f ff ff ff 7f ff ff ff 7f ff ff ff 7f ff 0x70: ff ff 7f ff ff ff 7f ff ff ff 7f ff ff ff 7f ff 0x80: ff ff 7f ff ff ff 7f ff ff ff 7f ff ff ff 7f ff 0x90: ff ff 7f ff ff ff 7f ff ff ff 7f ff ff ff 7f ff 0xa0: ff ff 7f ff ff ff 7f ff ff ff 7f ff ff ff 7f ff 0xb0: ff ff 7f ff ff ff 7f ff ff ff 7f ff ff ff 7f ff 0xc0: ff ff 7f ff ff ff 7f ff ff ff 7f ff ff ff 7f ff 0xd0: ff ff 7f ff ff ff 7f ff ff ff 7f ff ff ff 7f ff 0xe0: ff ff 7f ff ff ff 7f ff ff ff 7f ff ff ff 7f ff 0xf0: ff ff 7f ff ff ff 7f ff ff ff 7f ff ff ff 7f cardbus1: <unknown card> (vendor=0x10b7, dev=0x6565) at 0.1 irq 0 cardbus1: reading CIS data from ROM cardbus1: Bad header in rom 0: ffff cardbus1: <unknown card> (vendor=0xffff, dev=0x7fff) at 0.2 cardbus1: reading CIS data from ROM cardbus1: Bad header in rom 0: ffff cardbus1: <unknown card> (vendor=0xffff, dev=0x7fff) at 0.3 cardbus1: reading CIS data from ROM cardbus1: Bad header in rom 0: ffff cardbus1: <unknown card> (vendor=0xffff, dev=0x7fff) at 0.4 cardbus1: reading CIS data from ROM cardbus1: Bad header in rom 0: ffff cardbus1: <unknown card> (vendor=0xffff, dev=0x7fff) at 0.5 cardbus1: reading CIS data from ROM cardbus1: Bad header in rom 0: ffff cardbus1: <unknown card> (vendor=0xffff, dev=0x7fff) at 0.6 cardbus1: reading CIS data from ROM cardbus1: Bad header in rom 0: ffff cardbus1: <unknown card> (vendor=0xffff, dev=0x7fff) at 0.7 pccbb1: card activation failed uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xfcc0-0xfcdf irq 10 at device 7.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered /dev/vmmon: Module vmmon: registered with major=200 minor=0 tag=$Name: build-570 $ /dev/vmmon: Module vmmon: initialized --opJtzjQTFsWo+cga Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=LAPTOP-CB # # GENERIC -- Generic kernel configuration file for FreeBSD/i386 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the NOTES configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in NOTES. # # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.272 2000/08/24 18:56:54 peter Exp $ machine i386 cpu I686_CPU ident LAPTOP-CB maxusers 64 #To statically compile in device wiring instead of /boot/device.hints #hints "GENERIC.hints" #Default places to look for devices. #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking #options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options SOFTUPDATES #Enable FFS soft updates support options MFS #Memory Filesystem #options DEVFS #Device Filesystem options MD_ROOT #MD is a potential root device #options NFS #Network Filesystem #options NFS_ROOT #NFS usable as root device, NFS required #options MSDOSFS #MSDOS Filesystem #options CD9660 #ISO 9660 Filesystem #options CD9660_ROOT #CD-ROM usable as root, CD9660 required options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] #options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options P1003_1B #Posix P1003_1B real-time extensions options _KPOSIX_PRIORITY_SCHEDULING options KBD_INSTALL_CDEV # install a CDEV entry in /dev # To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O # Optionally these may need tweaked, (defaults shown): #options NCPU=2 # number of CPUs #options NBUS=8 # number of busses #options NAPIC=1 # number of IO APICs #options NINTR=24 # number of INTs device isa #device eisa device pci #options COMPAT_OLDISA # compatability shims for lnc, fe, le #options COMPAT_OLDPCI # compatability shims for lnc, vx # Floppy drives device fdc # ATA and ATAPI devices device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives device atapist # ATAPI tape drives options ATA_STATIC_ID #Static device numbering #options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices # SCSI Controllers #device ahb # EISA AHA1742 family #device ahc # AHA2940 and onboard AIC7xxx devices #device amd # AMD 53C974 (Teckram DC-390(T)) #device isp # Qlogic family ##device ncr # NCR/Symbios Logic #device sym # NCR/Symbios Logic (newer chipsets + those of `ncr') #device adv #device adw #device bt #device aha 1 #device aic # RAID controllers interfaced to the SCSI subsystem #device dpt # DPT Smartcache - See NOTES for options! #device mly # Mylex AcceleRAID/eXtremeRAID # SCSI peripherals #device scbus # SCSI bus (required) #device da # Direct Access (disks) #device sa # Sequential Access (tape etc) #device cd # CD #device pass # Passthrough device (direct SCSI access) # RAID controllers #device ida # Compaq Smart RAID #device amr # AMI MegaRAID #device mlx # Mylex DAC960 family # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc 1 device atkbd device psm device vga # splash screen/screen saver device splash # syscons is the default console driver, resembling an SCO console device sc 1 # Enable this for the pcvt (VT220 compatible) console driver #device vt #options XSERVER # support for X server on a vt console #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std # Floating point support - do not disable. device npx # Power management support (see NOTES for more options) device apm # PCCARD (PCMCIA) support #device card #device pcic device cardbus device pccbb # Serial (COM) ports device sio # Parallel port device ppc device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da # PCI Ethernet NICs. #device de # DEC/Intel DC21x4x (``Tulip'') #device fxp # Intel EtherExpress PRO/100B (82557, 82558) #device tx # SMC 9432TX (83c170 ``EPIC'') #device vx # 3Com 3c590, 3c595 (``Vortex'') #device wx # Intel Gigabit Ethernet Card (``Wiseman'') # PCI Ethernet NICs that use the common MII bus controller code. #device miibus # MII bus support #device dc # DEC/Intel 21143 and various workalikes #device rl # RealTek 8129/8139 #device sf # Adaptec AIC-6915 (``Starfire'') #device sis # Silicon Integrated Systems SiS 900/SiS 7016 #device ste # Sundance ST201 (D-Link DFE-550TX) #device tl # Texas Instruments ThunderLAN #device vr # VIA Rhine, Rhine II #device wb # Winbond W89C840F #device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # ISA Ethernet NICs. #device ed #device ex #device ep #device cs #device sn # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really # exists only as a PCMCIA device, so there is no ISA attatement needed # and resources will always be dynamically assigned by the pccard code. #device wi # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP # mode (the factory default). If you set the switches on your ISA # card for a manually chosen I/O address and IRQ, you must specify # those paremeters here. #device an # BayStack 660 and others #device awi # Xircom pccard ethernet device xe # The probe order of these is presently determined by i386/isa/isa_compat.c. #device ie #device fe #device le #device lnc # Pseudo devices - the number indicates how many units to allocated. device loop # Network loopback device ether # Ethernet support device sl # Kernel SLIP device ppp 1 # Kernel PPP device tun # Packet tunnel. device pty # Pseudo-ttys (telnet etc) device md # Memory "disks" #device gif 4 # IPv6 and IPv4 tunneling #device faith 1 # IPv6-to-IPv4 relaying (translation) # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! device bpf # Berkeley packet filter # USB support #device uhci # UHCI PCI->USB interface #device ohci # OHCI PCI->USB interface #device usb # USB Bus (required) #device udbp # USB Double Bulk Pipe devices #device ugen # Generic #device uhid # "Human Interface Devices" #device ukbd # Keyboard #device ulpt # Printer #device umass # Disks/Mass storage - Requires scbus and da #device ums # Mouse #device urio # Diamond Rio 500 MP3 player # USB Ethernet, requires mii #device aue # ADMtek USB ethernet #device cue # CATC USB ethernet #device kue # Kawasaki LSI USB ethernet options INCLUDE_CONFIG_FILE options IPSEC options IPSEC_ESP options IPFILTER options IPFILTER_LOG device pcm device pmtimer device random --opJtzjQTFsWo+cga-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20001019160300.A81908>