Date: Mon, 31 Jan 2005 10:41:19 +1100 From: <dap10@uow.edu.au> To: freebsd-hardware@freebsd.org Subject: ATA configuration Message-ID: <6fb5e4d2.c6fffe1a.821c600@mirapoint.uow.edu.au>
index | next in thread | raw e-mail
[-- Attachment #1 --]
Hi,
I've recently set my system up in a rather perculiar way, the
mainboard
(an ABIT bx133) has an onboard Highpoint HP370 ATA-100
controller . I connected a Western Digital 120GB Hard disk to
the ATA-100 disk and can boot freebsd of the ATA-100. The
problem with this is that
ATA_STATIC_ID option turned on, then lists the drive as ad4,
which means
at boot time, the system keeps probing for ad0, and my bootup
is basically
stalled for about 60 seconds while the ata driver tries to get
around the
fact that I have no ad0.
I can't get ATA-100 support on ad0 because the Highpoint RAID
controller is setup that way. There are four IDE slots and
only two ATA-100 slots.
Is there any configuration options besides installing a small
boot drive that can be used to get rid of the 60 second stall
on startup.
# atacontrol list
ATA channel 0:
Master: no device present
Slave: no device present
ATA channel 1:
Master: acd0 <CREATIVE CD-RW RW1611E/OCS5> ATA/ATAPI
revision 0
Slave: no device present
ATA channel 2:
Master: ad4 <WDC WD1200JB-00GVA0/08.02D08> ATA/ATAPI
revision 6
Slave: no device present
ATA channel 3:
Master: no device present
Slave: no device present
# atacontrol info 2
Master: ad4 <WDC WD1200JB-00GVA0/08.02D08> ATA/ATAPI revision 6
Slave: no device present
Attached is the dmesg output.
Thanks,
- Dave
[-- Attachment #2 --]
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-RELEASE #0: Fri Nov 5 04:19:18 UTC 2004
root@harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Celeron (701.59-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 268369920 (255 MB)
avail memory = 252960768 (241 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <IntelR AWRDACPI> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz0: _CRT value is absurd, ignored (200.0C)
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0x5000-0x500f,0x4000-0x4041,0xcf8-0xcff on acpi0
ACPI link \\_SB_.PCI0.LNKD has invalid initial irq 9, ignoring
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xd0000000-0xd3ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xd000-0xd01f irq 11 at device 7.2 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
rl0: <RealTek 8139 10/100BaseTX> port 0xd400-0xd4ff mem 0xd9000000-0xd90000ff irq 11 at device 13.0 on pci0
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:50:bf:5a:f1:df
pci0: <multimedia, audio> at device 15.0 (no driver attached)
atapci1: <HighPoint HPT370 UDMA100 controller> port 0xec00-0xecff,0xe800-0xe803,0xe400-0xe407,0xe000-0xe003,0xdc00-0xdc07 irq 11 at device 19.0 on pci0
ata2: channel #0 on atapci1
ata3: channel #1 on atapci1
fdc0: <floppy drive controller> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
orm0: <ISA Option ROMs> at iomem 0xcc000-0xcf7ff,0xc0000-0xca7ff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 701594750 Hz quality 800
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
acpi_tz0: _CRT value is absurd, ignored (200.0C)
acpi_tz0: _CRT value is absurd, ignored (200.0C)
acd0: CDRW <CREATIVE CD-RW RW1611E/OCS5> at ata1-master UDMA33
ad4: 114473MB <WDC WD1200JB-00GVA0/08.02D08> [232581/16/63] at ata2-master UDMA100
Mounting root from ufs:/dev/ad4s1a
help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6fb5e4d2.c6fffe1a.821c600>