Date: Sat, 24 Nov 2012 10:14:40 -0500 From: "illoai@gmail.com" <illoai@gmail.com> To: mexas@bristol.ac.uk Cc: freebsd-questions@freebsd.org Subject: Re: do I need agp(4) on my amd64 laptop Message-ID: <CAHHBGkpRBoMuaQC_SnJdKZ5if3nE=aheuxJg49HO2eE9dz6NwQ@mail.gmail.com> In-Reply-To: <201211221119.qAMBJEAx040086@mech-aslap239.men.bris.ac.uk> References: <201211221119.qAMBJEAx040086@mech-aslap239.men.bris.ac.uk>
next in thread | previous in thread | raw e-mail | index | archive | help
On 22 November 2012 06:19, Anton Shterenlikht <mexas@bristol.ac.uk> wrote: > It is not clear for me from the agp(4) man page, > whether I need this device in the kernel or not. > The pciconf -lv output is below. Or do I need to > show dmesg? > > Please advise > > Thanks > Anton > > > hostb0@pci0:0:0:0: class=0x060000 card=0x30c2103c chip=0x79101002 rev=0x00 hdr=0x00 > vendor = 'Advanced Micro Devices [AMD] nee ATI' > device = 'RS690 Host Bridge' > class = bridge > subclass = HOST-PCI > pcib1@pci0:0:1:0: class=0x060400 card=0x30c2103c chip=0x79121002 rev=0x00 hdr=0x01 > vendor = 'Advanced Micro Devices [AMD] nee ATI' > device = 'RS690 PCI to PCI Bridge (Internal gfx)' > class = bridge > subclass = PCI-PCI > pcib2@pci0:0:4:0: class=0x060400 card=0x30c2103c chip=0x79141002 rev=0x00 hdr=0x01 > vendor = 'Advanced Micro Devices [AMD] nee ATI' > class = bridge > subclass = PCI-PCI > pcib3@pci0:0:5:0: class=0x060400 card=0x30c2103c chip=0x79151002 rev=0x00 hdr=0x01 > vendor = 'Advanced Micro Devices [AMD] nee ATI' > device = 'RS690 PCI to PCI Bridge (PCI Express Port 1)' > class = bridge > subclass = PCI-PCI > pcib4@pci0:0:6:0: class=0x060400 card=0x30c2103c chip=0x79161002 rev=0x00 hdr=0x01 > vendor = 'Advanced Micro Devices [AMD] nee ATI' > device = 'RS690 PCI to PCI Bridge (PCI Express Port 2)' > class = bridge > subclass = PCI-PCI > ahci0@pci0:0:18:0: class=0x01018f card=0x43801002 chip=0x43801002 rev=0x00 hdr=0x00 > vendor = 'Advanced Micro Devices [AMD] nee ATI' > device = 'SB600 Non-Raid-5 SATA' > class = mass storage > subclass = ATA > ohci0@pci0:0:19:0: class=0x0c0310 card=0x30c2103c chip=0x43871002 rev=0x00 hdr=0x00 > vendor = 'Advanced Micro Devices [AMD] nee ATI' > device = 'SB600 USB (OHCI0)' > class = serial bus > subclass = USB > ohci1@pci0:0:19:1: class=0x0c0310 card=0x30c2103c chip=0x43881002 rev=0x00 hdr=0x00 > vendor = 'Advanced Micro Devices [AMD] nee ATI' > device = 'SB600 USB (OHCI1)' > class = serial bus > subclass = USB > ohci2@pci0:0:19:2: class=0x0c0310 card=0x30c2103c chip=0x43891002 rev=0x00 hdr=0x00 > vendor = 'Advanced Micro Devices [AMD] nee ATI' > device = 'SB600 USB (OHCI2)' > class = serial bus > subclass = USB > ohci3@pci0:0:19:3: class=0x0c0310 card=0x30c2103c chip=0x438a1002 rev=0x00 hdr=0x00 > vendor = 'Advanced Micro Devices [AMD] nee ATI' > device = 'SB600 USB (OHCI3)' > class = serial bus > subclass = USB > ohci4@pci0:0:19:4: class=0x0c0310 card=0x30c2103c chip=0x438b1002 rev=0x00 hdr=0x00 > vendor = 'Advanced Micro Devices [AMD] nee ATI' > device = 'SB600 USB (OHCI4)' > class = serial bus > subclass = USB > ehci0@pci0:0:19:5: class=0x0c0320 card=0x30c2103c chip=0x43861002 rev=0x00 hdr=0x00 > vendor = 'Advanced Micro Devices [AMD] nee ATI' > device = 'SB600 USB Controller (EHCI)' > class = serial bus > subclass = USB > none0@pci0:0:20:0: class=0x0c0500 card=0x30c2103c chip=0x43851002 rev=0x14 hdr=0x00 > vendor = 'Advanced Micro Devices [AMD] nee ATI' > device = 'SBx00 SMBus Controller' > class = serial bus > subclass = SMBus > atapci0@pci0:0:20:1: class=0x010182 card=0x30c2103c chip=0x438c1002 rev=0x00 hdr=0x00 > vendor = 'Advanced Micro Devices [AMD] nee ATI' > device = 'SB600 IDE' > class = mass storage > subclass = ATA > hdac0@pci0:0:20:2: class=0x040300 card=0x30c2103c chip=0x43831002 rev=0x00 hdr=0x00 > vendor = 'Advanced Micro Devices [AMD] nee ATI' > device = 'SBx00 Azalia (Intel HDA)' > class = multimedia > subclass = HDA > isab0@pci0:0:20:3: class=0x060100 card=0x30c2103c chip=0x438d1002 rev=0x00 hdr=0x00 > vendor = 'Advanced Micro Devices [AMD] nee ATI' > device = 'SB600 PCI to LPC Bridge' > class = bridge > subclass = PCI-ISA > pcib5@pci0:0:20:4: class=0x060401 card=0x00000000 chip=0x43841002 rev=0x00 hdr=0x01 > vendor = 'Advanced Micro Devices [AMD] nee ATI' > device = 'SBx00 PCI to PCI Bridge' > class = bridge > subclass = PCI-PCI > hostb1@pci0:0:24:0: class=0x060000 card=0x00000000 chip=0x11001022 rev=0x00 hdr=0x00 > vendor = 'Advanced Micro Devices [AMD]' > device = 'K8 [Athlon64/Opteron] HyperTransport Technology Configuration' > class = bridge > subclass = HOST-PCI > hostb2@pci0:0:24:1: class=0x060000 card=0x00000000 chip=0x11011022 rev=0x00 hdr=0x00 > vendor = 'Advanced Micro Devices [AMD]' > device = 'K8 [Athlon64/Opteron] Address Map' > class = bridge > subclass = HOST-PCI > hostb3@pci0:0:24:2: class=0x060000 card=0x00000000 chip=0x11021022 rev=0x00 hdr=0x00 > vendor = 'Advanced Micro Devices [AMD]' > device = 'K8 [Athlon64/Opteron] DRAM Controller' > class = bridge > subclass = HOST-PCI > hostb4@pci0:0:24:3: class=0x060000 card=0x00000000 chip=0x11031022 rev=0x00 hdr=0x00 > vendor = 'Advanced Micro Devices [AMD]' > device = 'K8 [Athlon64/Opteron] Miscellaneous Control' > class = bridge > subclass = HOST-PCI > vgapci0@pci0:1:5:0: class=0x030000 card=0x30c2103c chip=0x791f1002 rev=0x00 hdr=0x00 > vendor = 'Advanced Micro Devices [AMD] nee ATI' > device = 'RS690M [Radeon X1200 Series]' > class = display > subclass = VGA > bge0@pci0:16:0:0: class=0x020000 card=0x30c2103c chip=0x171314e4 rev=0x02 hdr=0x00 > vendor = 'Broadcom Corporation' > device = 'NetLink BCM5906M Fast Ethernet PCI Express' > class = network > subclass = ethernet > siba_bwn0@pci0:48:0:0: class=0x028000 card=0x1371103c chip=0x431214e4 rev=0x02 hdr=0x00 > vendor = 'Broadcom Corporation' > device = 'BCM4311 802.11a/b/g' > class = network > cbb0@pci0:2:4:0: class=0x060700 card=0x30c2103c chip=0x04761180 rev=0xb6 hdr=0x02 > vendor = 'Ricoh Co Ltd' > device = 'RL5c476 II' > class = bridge > subclass = PCI-CardBus You bring up a good point. Your laptop is almost the same as mine, & the graphics chip is connected via PCI Express. I should see if it builds & runs without agp. -- --
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAHHBGkpRBoMuaQC_SnJdKZ5if3nE=aheuxJg49HO2eE9dz6NwQ>