Date: Sat, 23 Jul 2005 00:54:07 +0000 From: Ben Kaduk <minimarmot@gmail.com> To: John Baldwin <jhb@freebsd.org> Cc: freebsd-current@freebsd.org Subject: Re: curiousities in 6.0beta1 dmesg Message-ID: <47d0403c0507221754dceab60@mail.gmail.com> In-Reply-To: <200507221544.35384.jhb@FreeBSD.org> References: <47d0403c05071713131a0689ee@mail.gmail.com> <200507221544.35384.jhb@FreeBSD.org>
index | next in thread | previous in thread | raw e-mail
[-- Attachment #1 --] On 7/22/05, John Baldwin <jhb@freebsd.org> wrote: > On Sunday 17 July 2005 04:13 pm, Ben Kaduk wrote: > > Hi all, > > > > I recently upgraded to: > > bash-2.05b$ uname -a > > FreeBSD prolepsis.math.uiuc.edu 6.0-BETA1 FreeBSD 6.0-BETA1 #2: Sat > > Jul 16 21:34:06 UTC 2005 > > kaduk@prolepsis.math.uiuc.edu:/usr/obj/usr/src/sys/PROLEPSIS i386 > > > > from 5.4-Release using a source upgrade, and I noticed a few things in the > > dmesg whilst it was booting that struck me as a bit odd. > > Copyright (c) 1992-2005 The FreeBSD Project. > > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > > The Regents of the University of California. All rights reserved. > > FreeBSD 6.0-BETA1 #2: Sat Jul 16 21:34:06 UTC 2005 > > kaduk@prolepsis.math.uiuc.edu:/usr/obj/usr/src/sys/PROLEPSIS > > Timecounter "i8254" frequency 1193182 Hz quality 0 > > CPU: Mobile Intel(R) Pentium(R) 4 - M CPU 2.50GHz (2492.65-MHz 686-class > > CPU) Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 > > > > Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMO > >V,PAT, PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > > Features2=0x4400<CNTX-ID,<b14>> > > real memory = 1073405952 (1023 MB) > > avail memory = 1037340672 (989 MB) > > npx0: [FAST] > > npx0: <math processor> on motherboard > > npx0: INT 16 interface > > acpi0: <DELL CPi R > on motherboard > > pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0 > > pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0 > > > > > > [ pci_link1 seems to have an irq here. . . ] > > > > > > pci_link2: <ACPI PCI Link LNKC> irq 11 on acpi0 > > pci_link3: <ACPI PCI Link LNKD> irq 11 on acpi0 > > pci_link4: <ACPI PCI Link LNKE> on acpi0 > > pci_link5: <ACPI PCI Link LNKH> irq 11 on acpi0 > > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 > > cpu0: <ACPI CPU> on acpi0 > > acpi_throttle0: <ACPI CPU Throttling> on cpu0 > > acpi_acad0: <AC Adapter> on acpi0 > > acpi_cmbat0: <Control Method Battery> on acpi0 > > acpi_cmbat1: <Control Method Battery> on acpi0 > > acpi_lid0: <Control Method Lid Switch> on acpi0 > > acpi_button0: <Power Button> on acpi0 > > acpi_button1: <Sleep Button> on acpi0 > > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > > pci0: <ACPI PCI bus> on pcib0 > > pci_link1: Unable to choose an IRQ > > > > > > [ so why does it need to choose an irq here? ] > > It's not quite that simple. :( It may be that the link says that irq 11 is > not valid. Can you provide a verbose dmesg? > > -- > John Baldwin <jhb@FreeBSD.org> <>< http://www.FreeBSD.org/~jhb/ > "Power Users Use the Power to Serve" = http://www.FreeBSD.org > John, Thanks for the insight. Not only can i provide a verbose dmesg, but I can do so for both the beta and for HEAD prolepsis# uname -a FreeBSD prolepsis.math.uiuc.edu 7.0-CURRENT FreeBSD 7.0-CURRENT #4: Fri Jul 22 23:53:40 UTC 2005 kaduk@prolepsis.math.uiuc.edu:/usr/obj/usr/src/sys/PROLEPSIS i386 as well as a regular dmesg from HEAD, since there are even more curiousities, namely, in the verbose boots, pci_link1 is assigned an IRQ, but apparently not in the regular boots. I hope the attached dmesgs are meaningful, Ben Kaduk [-- Attachment #2 --] Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-BETA1 #2: Sat Jul 16 21:34:06 UTC 2005 kaduk@prolepsis.math.uiuc.edu:/usr/obj/usr/src/sys/PROLEPSIS Preloaded elf kernel "/boot/kernel/kernel" at 0xc0c0c000. Preloaded elf module "/boot/kernel/linux.ko" at 0xc0c0c158. Preloaded elf module "/boot/modules/nvidia.ko" at 0xc0c0c204. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0c0c2b0. Calibrating clock(s) ... i8254 clock: 1193198 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2492654706 Hz CPU: Mobile Intel(R) Pentium(R) 4 - M CPU 2.50GHz (2492.65-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x4400<CNTX-ID,<b14>> real memory = 1073405952 (1023 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001025000 - 0x000000003ed76fff, 1037377536 bytes (253266 pages) avail memory = 1037340672 (989 MB) bios32: Found BIOS32 Service Directory header at 0xc00ffe80 bios32: Entry = 0xffe90 (c00ffe90) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xc96e pnpbios: Found PnP BIOS data at 0xc00fe2d0 pnpbios: Entry = f0000:e2f4 Rev = 1.0 pnpbios: Event flag at 4b4 Other BIOS signatures found: random: <entropy source, Software, Yarrow> mem: <memory> Pentium Pro MTRR support enabled io: <I/O> null: <null device, zero device> npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <DELL CPi R > on motherboard acpi0: [MPSAFE] pci_open(1): mode 1 addr port (0x0cf8) is 0x8000eac4 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=1a308086) pcibios: BIOS version 2.10 Found $PIR table, 9 entries at 0xc00fc580 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 29 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 B 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 D 0x6b 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 D 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 31 A 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 31 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 1 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 2 0 A 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 2 1 A 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 2 1 B 0x63 none embedded 2 3 A 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 2 3 B 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 8 0 A 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 8 0 B 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 8 1 A 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 8 1 B 0x63 3 4 5 6 7 9 10 11 12 14 15 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 atpic: Programming IRQ9 as level/low pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0 pci_link0: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 9 10 11 pci_link0: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 9 10 11 pci_link0: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 9 10 11 pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0 pci_link1: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 5 7 pci_link1: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 5 7 pci_link1: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 5 7 pci_link2: <ACPI PCI Link LNKC> irq 11 on acpi0 pci_link2: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 9 10 11 pci_link2: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 9 10 11 pci_link2: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 9 10 11 pci_link3: <ACPI PCI Link LNKD> irq 11 on acpi0 pci_link3: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 5 7 9 10 11 pci_link3: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 5 7 9 10 11 pci_link3: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 5 7 9 10 11 pci_link4: <ACPI PCI Link LNKE> on acpi0 pci_link4: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link4: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link4: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link5: <ACPI PCI Link LNKH> irq 11 on acpi0 pci_link5: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link5: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link5: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 ACPI timer: 0/10 0/10 0/10 0/10 0/10 0/10 0/10 0/10 0/10 0/10 -> 0 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 acpi_throttle0: P_CNT from P_BLK 0x8e0 acpi_acad0: <AC Adapter> on acpi0 acpi_cmbat0: <Control Method Battery> on acpi0 acpi_cmbat1: <Control Method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 found-> vendor=0x8086, dev=0x1a30, revid=0x04 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 3, range 32, base e8000000, size 27, enabled found-> vendor=0x8086, dev=0x1a31, revid=0x04 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24c2, revid=0x03 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type 4, range 32, base 0000bf80, size 5, enabled pcib0: matched entry for 0.29.INTA (src \\_SB_.PCI0.LNKA:0) pcib0: slot 29 INTA routed to irq 11 via \\_SB_.PCI0.LNKA found-> vendor=0x8086, dev=0x24c4, revid=0x03 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[20]: type 4, range 32, base 0000bf40, size 5, enabled pcib0: matched entry for 0.29.INTB (src \\_SB_.PCI0.LNKD:0) pcib0: slot 29 INTB routed to irq 11 via \\_SB_.PCI0.LNKD found-> vendor=0x8086, dev=0x24c7, revid=0x03 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 map[20]: type 4, range 32, base 0000bf20, size 5, enabled pcib0: matched entry for 0.29.INTC (src \\_SB_.PCI0.LNKC:0) pcib0: slot 29 INTC routed to irq 11 via \\_SB_.PCI0.LNKC found-> vendor=0x8086, dev=0x24cd, revid=0x03 bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base f4fffc00, size 10, enabled pcib0: matched entry for 0.29.INTD (src \\_SB_.PCI0.LNKH:0) pcib0: slot 29 INTD routed to irq 11 via \\_SB_.PCI0.LNKH found-> vendor=0x8086, dev=0x2448, revid=0x83 bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x8080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24cc, revid=0x03 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24ca, revid=0x03 bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[20]: type 4, range 32, base 0000bfa0, size 4, enabled map[24]: type 1, range 32, base 00000000, size 10, memory disabled found-> vendor=0x8086, dev=0x24c5, revid=0x03 bus=0, slot=31, func=5 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 0000b800, size 8, enabled map[14]: type 4, range 32, base 0000bc40, size 6, enabled map[18]: type 1, range 32, base f4fff800, size 9, enabled map[1c]: type 1, range 32, base f4fff400, size 8, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LNKB:0) pci_link1: Picked IRQ 9 with weight 0 pcib0: slot 31 INTB routed to irq 9 via \\_SB_.PCI0.LNKB found-> vendor=0x8086, dev=0x24c6, revid=0x03 bus=0, slot=31, func=6 class=07-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 0000b400, size 8, enabled map[14]: type 4, range 32, base 0000b080, size 7, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LNKB:0) pcib0: slot 31 INTB routed to irq 9 via \\_SB_.PCI0.LNKB agp0: <Intel 82845 host to AGP bridge> mem 0xe8000000-0xefffffff at device 0.0 on pci0 agp0: Reserved 0x8000000 bytes for rid 0x10 type 3 at 0xe8000000 agp0: allocating GATT for aperture of size 128M pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xc000-0xcfff pcib1: memory decode 0xfc000000-0xfdffffff pcib1: prefetched decode 0xf0000000-0xf3ffffff pci1: <ACPI PCI bus> on pcib1 pci1: physical bus=1 found-> vendor=0x10de, dev=0x0286, revid=0xa1 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0027, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base fc000000, size 24, enabled pcib1: (null) requested memory range 0xfc000000-0xfcffffff: good map[14]: type 3, range 32, base f0000000, size 26, enabled pcib1: (null) requested memory range 0xf0000000-0xf3ffffff: good pcib1: matched entry for 1.0.INTA (src \\_SB_.PCI0.LNKA:0) pcib1: slot 0 INTA routed to irq 11 via \\_SB_.PCI0.LNKA nvidia0: <GeForce4 4200 Go> mem 0xfc000000-0xfcffffff,0xf0000000-0xf3ffffff irq 11 at device 0.0 on pci1 nvidia0: Reserved 0x1000000 bytes for rid 0x10 type 3 at 0xfc000000 nvidia0: Reserved 0x4000000 bytes for rid 0x14 type 3 at 0xf0000000 nvidia0: [GIANT-LOCKED] uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xbf80-0xbf9f irq 11 at device 29.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf80 uhci0: [GIANT-LOCKED] usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xbf40-0xbf5f irq 11 at device 29.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf40 uhci1: [GIANT-LOCKED] usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xbf20-0xbf3f irq 11 at device 29.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf20 uhci2: [GIANT-LOCKED] usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0: <Intel 82801DB/DBL/DBM (ICH4) USB 2.0 controller> mem 0xf4fffc00-0xf4ffffff irq 11 at device 29.7 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xf4fffc00 ehci0: [GIANT-LOCKED] usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: <Intel 82801DB/DBL/DBM (ICH4) USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: 6 ports with 6 removable, self powered pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xd000-0xefff pcib2: memory decode 0xf6000000-0xfbffffff pcib2: prefetched decode 0xfff00000-0xfffff pcib2: Subtractively decoded bridge. pci2: <ACPI PCI bus> on pcib2 pci2: physical bus=2 found-> vendor=0x14e4, dev=0x4401, revid=0x01 bus=2, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base faffe000, size 13, enabled pcib2: (null) requested memory range 0xfaffe000-0xfaffffff: good pcib2: matched entry for 2.0.INTA (src \\_SB_.PCI0.LNKC:0) pcib2: slot 0 INTA routed to irq 11 via \\_SB_.PCI0.LNKC found-> vendor=0x104c, dev=0xac44, revid=0x02 bus=2, slot=1, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0000, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x07 (1750 ns) intpin=a, irq=255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base 00000000, size 12, memory disabled found-> vendor=0x104c, dev=0x8029, revid=0x00 bus=2, slot=1, func=1 class=0c-00-10, hdrtype=0x00, mfdev=1 cmdreg=0x0116, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base faffd800, size 11, enabled pcib2: (null) requested memory range 0xfaffd800-0xfaffdfff: good map[14]: type 1, range 32, base faff8000, size 14, enabled pcib2: (null) requested memory range 0xfaff8000-0xfaffbfff: good pcib2: matched entry for 2.1.INTA (src \\_SB_.PCI0.LNKD:0) pcib2: slot 1 INTA routed to irq 11 via \\_SB_.PCI0.LNKD found-> vendor=0x14e4, dev=0x4324, revid=0x02 bus=2, slot=3, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base faff6000, size 13, enabled pcib2: (null) requested memory range 0xfaff6000-0xfaff7fff: good pcib2: matched entry for 2.3.INTA (src \\_SB_.PCI0.LNKB:0) pcib2: slot 3 INTA routed to irq 9 via \\_SB_.PCI0.LNKB bfe0: <Broadcom BCM4401 Fast Ethernet> mem 0xfaffe000-0xfaffffff irq 11 at device 0.0 on pci2 bfe0: Reserved 0x2000 bytes for rid 0x10 type 3 at 0xfaffe000 miibus0: <MII bus> on bfe0 bmtphy0: <BCM4401 10/100baseTX PHY> on miibus0 bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bfe0: bpf attached bfe0: Ethernet address: 00:0b:db:99:e8:c7 bfe0: [MPSAFE] cbb0: <TI4510 PCI-CardBus Bridge> at device 1.0 on pci2 pcib2: cbb0 requested memory range 0xf6000000-0xfbffffff: good cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xf6000000 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pcib2: matched entry for 2.1.INTA (src \\_SB_.PCI0.LNKD:0) pcib2: slot 1 INTA routed to irq 11 via \\_SB_.PCI0.LNKD cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0xac44104c 0x02100007 0x06070002 0x00822008 0x10: 0xf6000000 0x020000a0 0x20040302 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b 0x40: 0x013e1028 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x28407061 0x00000000 0x001f0000 0x012c1202 0x90: 0x606483c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 fwohci0: vendor=104c, dev=8029 fwohci0: vendor=104c, dev=8029 fwohci0: <1394 Open Host Controller Interface> mem 0xfaffd800-0xfaffdfff,0xfaff8000-0xfaffbfff irq 11 at device 1.1 on pci2 fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xfaffd800 fwohci0: [MPSAFE] fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 46:4f:c0:00:1d:2f:1c:61 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) pci2: <network> at device 3.0 (no driver attached) pci2:3:0: Transition from D0 to D3 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xbfa0-0xbfaf at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xbfa0 ata0: <ATA channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata0: [MPSAFE] ata1: <ATA channel 1> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER> ata1: [MPSAFE] pcm0: <Intel ICH4 (82801DB)> port 0xb800-0xb8ff,0xbc40-0xbc7f mem 0xf4fff800-0xf4fff9ff,0xf4fff400-0xf4fff4ff irq 9 at device 31.5 on pci0 pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xb800 pcm0: Reserved 0x40 bytes for rid 0x14 type 4 at 0xbc40 pcm0: [GIANT-LOCKED] pcm0: <SigmaTel STAC9750/51 AC97 Codec (id = 0x83847650)> pcm0: Codec features headphone, 20 bit DAC, 20 bit ADC, 5 bit master volume, SigmaTel 3D Enhancement pcm0: Primary codec extended features variable rate PCM, reserved 1, AMAP, reserved 4 pcm0: sndbuf_setmap 3e723000, 4000; 0xed67f000 -> 3e723000 pcm0: sndbuf_setmap 3e71c000, 4000; 0xed683000 -> 3e71c000 pci0: <simple comms, generic modem> at device 31.6 (no driver attached) pci0:31:6: Transition from D0 to D3 acpi_tz0: <Thermal Zone> on acpi0 psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: current command byte:0065 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model GlidePoint, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 sio0: irq maps: 0xa01 0xa09 0xa01 0xa01 sio0: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 flags 0x10 on acpi0 sio0: type 16550A ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 1 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sc: sc0 already exists; skipping it sio: sio0 already exists; skipping it vga: vga0 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcf7ff,0xcf800-0xcffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) sio1 failed to probe at port 0x2f8 irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vt0: not probed (disabled) isa_probe_children: probing PnP devices ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. Device configuration finished. Timecounter "TSC" frequency 2492654706 Hz quality 800 Timecounters tick every 1.000 msec Linux ELF exec handler installed lo0: bpf attached acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times acpi_cmbat0: battery initialization start acpi_cmbat0: battery initialization done, tried 1 times acpi_cmbat1: battery initialization start ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire ad0: setting PIO4 on Intel ICH4 chip ad0: setting UDMA100 on Intel ICH4 chip ad0: 76319MB <IC25N080ATMR04 0 MO4OAD0A> at ata0-master UDMA100 ad0: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad0 pcib2: pccard0 requested memory range 0xf6000000-0xfbffffff: good pccard0: CIS version PC Card Standard 5.0 pccard0: CIS info: IBM, 56K Data-Fax Modem pccard0: Manufacturer code 0x89, product 0x47 pccard0: function 0: serial port, ccr addr 300 mask 3 pccard0: function 0, config table entry 32: I/O card; irq mask ffff; iomask a, iospace 3f8-3ff; rdybsy_active io8 irqlevel powerdown audio pccard0: function 0, config table entry 33: I/O card; irq mask ffff; iomask a, iospace 2f8-2ff; rdybsy_active io8 irqlevel powerdown audio pccard0: function 0, config table entry 34: I/O card; irq mask ffff; iomask a, iospace 3e8-3ef; rdybsy_active io8 irqlevel powerdown audio pccard0: function 0, config table entry 35: I/O card; irq mask ffff; iomask a, iospace 2e8-2ef; rdybsy_active io8 irqlevel powerdown audio pcib2: pccard0 requested I/O range 0x3f8-0x3ff: in range pcib2: pccard0 requested memory range 0xf6000000-0xfbffffff: good sio4: <IBM 56K Data-Fax Modem> at port 0x3f8-0x3ff irq 11 function 0 config 32 on pccard0 sio4: type 16550A sio4: unable to activate interrupt in fast mode - using normal mode ata1: reiniting channel .. ata1: reset tp1 mask=03 ostat0=00 ostat1=00 ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER> ata1: reinit done .. ata1: reiniting channel .. ata1: reset tp1 mask=03 ostat0=00 ostat1=00 ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER> ata1: reinit done .. ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire acd0: setting PIO4 on Intel ICH4 chip acd0: setting UDMA33 on Intel ICH4 chip acd0: <MATSHITA CD-RW/DVD-ROM UJDA740/1.03> CDRW drive at ata1 as master acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: CD-ROM 120mm data disc pcm0: measured ac97 link rate at 47991 Hz, will use 48000 Hz (probe0:sbp0:0:0:0): error 22 (probe0:sbp0:0:0:0): Unretryable Error (probe1:sbp0:0:1:0): error 22 (probe1:sbp0:0:1:0): Unretryable Error (probe2:sbp0:0:2:0): error 22 (probe2:sbp0:0:2:0): Unretryable Error (probe3:sbp0:0:3:0): error 22 (probe3:sbp0:0:3:0): Unretryable Error (probe4:sbp0:0:4:0): error 22 (probe4:sbp0:0:4:0): Unretryable Error (probe5:sbp0:0:5:0): error 22 (probe5:sbp0:0:5:0): Unretryable Error (probe6:sbp0:0:6:0): error 22 (probe6:sbp0:0:6:0): Unretryable Error Trying to mount root from ufs:/dev/ad0s3a start_init: trying /sbin/init Loading configuration files. kenv: unable to get dumpdev kernel dumps on /dev/ad0s2b Entropy harvesting: interrupts ethernet point_to_point kickstart . swapon: adding /dev/ad0s2b as swap device Starting file system checks: /dev/ad0s3a: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s3a: clean, 94235 free (795 frags, 11680 blocks, 0.6% fragmentation) /dev/ad0s3e: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s3e: clean, 122362 free (42 frags, 15290 blocks, 0.0% fragmentation) /dev/ad0s3f: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s3f: clean, 6422559 free (64215 frags, 794793 blocks, 0.8% fragmentation) /dev/ad0s3d: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s3d: clean, 93274 free (226 frags, 11631 blocks, 0.2% fragmentation) Setting hostname: prolepsis.math.uiuc.edu. DHCPREQUEST on bfe0 to 255.255.255.255 port 67 DHCPACK from 130.126.110.10 bound to 130.126.111.24 -- renewal in 1800 seconds. bfe0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=8<VLAN_MTU> inet6 fe80::20b:dbff:fe99:e8c7%bfe0 prefixlen 64 scopeid 0x1 inet 130.126.111.24 netmask 0xfffffc00 ether 00:0b:db:99:e8:c7 media: Ethernet autoselect (100baseTX <full-duplex>) status: active lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet 127.0.0.1 netmask 0xff000000 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 Additional routing options: . Starting devd. Starting ums0 moused: . hw.acpi.cpu.cx_lowest: C1 -> C1 dhclient bfe0: already running? dhclient bfe0: already running? Mounting NFS file systems: . Creating and/or trimming log files: . Starting syslogd. Checking for core dump on /dev/ad0s2b... savecore: unable to open bounds file, using 0 savecore: no dumps found ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib /usr/local/lib/compat/pkg a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout /usr/X11R6/lib/aout Starting usbd. Starting local daemons: . Updating motd . Configuring syscons: blanktime screensaver splash: image decoder found: blank_saver . Starting sshd. Initial i386 initialization: . Additional ABI support: linux . Starting cron. Local package initialization: . Additional TCP options: . Starting default moused: . Starting background file system checks in 60 seconds. Sat Jul 23 00:23:21 UTC 2005 Jul 23 00:23:27 prolepsis login: ROOT LOGIN (root) ON ttyv0 [-- Attachment #3 --] Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 7.0-CURRENT #4: Fri Jul 22 23:53:40 UTC 2005 kaduk@prolepsis.math.uiuc.edu:/usr/obj/usr/src/sys/PROLEPSIS Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Mobile Intel(R) Pentium(R) 4 - M CPU 2.50GHz (2492.65-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x4400<CNTX-ID,<b14>> real memory = 1073405952 (1023 MB) avail memory = 1041526784 (993 MB) npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <DELL CPi R > on motherboard pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0 pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0 pci_link2: <ACPI PCI Link LNKC> irq 11 on acpi0 pci_link3: <ACPI PCI Link LNKD> irq 11 on acpi0 pci_link4: <ACPI PCI Link LNKE> on acpi0 pci_link5: <ACPI PCI Link LNKH> irq 11 on acpi0 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 acpi_acad0: <AC Adapter> on acpi0 acpi_cmbat0: <Control Method Battery> on acpi0 acpi_cmbat1: <Control Method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci_link1: Unable to choose an IRQ agp0: <Intel 82845 host to AGP bridge> mem 0xe8000000-0xefffffff at device 0.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xbf80-0xbf9f irq 11 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xbf40-0xbf5f irq 11 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xbf20-0xbf3f irq 11 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0: <Intel 82801DB/DBL/DBM (ICH4) USB 2.0 controller> mem 0xf4fffc00-0xf4ffffff irq 11 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: <Intel 82801DB/DBL/DBM (ICH4) USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: 6 ports with 6 removable, self powered pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci2: <ACPI PCI bus> on pcib2 bfe0: <Broadcom BCM4401 Fast Ethernet> mem 0xfaffe000-0xfaffffff irq 11 at device 0.0 on pci2 miibus0: <MII bus> on bfe0 bmtphy0: <BCM4401 10/100baseTX PHY> on miibus0 bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bfe0: Ethernet address: 00:0b:db:99:e8:c7 cbb0: <TI4510 PCI-CardBus Bridge> at device 1.0 on pci2 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 fwohci0: <1394 Open Host Controller Interface> mem 0xfaffd800-0xfaffdfff,0xfaff8000-0xfaffbfff irq 11 at device 1.1 on pci2 fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 46:4f:c0:00:1d:2f:1c:61 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) pci2: <network> at device 3.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xbfa0-0xbfaf at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 pcm0: <Intel ICH4 (82801DB)> port 0xb800-0xb8ff,0xbc40-0xbc7f mem 0xf4fff800-0xf4fff9ff,0xf4fff400-0xf4fff4ff irq 9 at device 31.5 on pci0 pcm0: [GIANT-LOCKED] pcm0: <SigmaTel STAC9750/51 AC97 Codec> pci0: <simple comms, generic modem> at device 31.6 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model GlidePoint, device ID 0 sio0: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 flags 0x10 on acpi0 sio0: type 16550A ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 1 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcf7ff,0xcf800-0xcffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. Timecounter "TSC" frequency 2492651536 Hz quality 800 Timecounters tick every 1.000 msec ad0: 76319MB <IC25N080ATMR04 0 MO4OAD0A> at ata0-master UDMA100 sio4: <IBM 56K Data-Fax Modem> at port 0x3f8-0x3ff irq 11 function 0 config 32 on pccard0 sio4: type 16550A sio4: unable to activate interrupt in fast mode - using normal mode acd0: CDRW <MATSHITA CD-RW/DVD-ROM UJDA740/1.03> at ata1-master UDMA33 Trying to mount root from ufs:/dev/ad0s3a Loading configuration files. kenv: unable to get dumpdev kernel dumps on /dev/ad0s2b Entropy harvesting: interrupts ethernet point_to_point kickstart . swapon: adding /dev/ad0s2b as swap device Starting file system checks: /dev/ad0s3a: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s3a: clean, 93586 free (826 frags, 11595 blocks, 0.7% fragmentation) /dev/ad0s3e: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s3e: clean, 122362 free (42 frags, 15290 blocks, 0.0% fragmentation) /dev/ad0s3f: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s3f: clean, 6422559 free (64215 frags, 794793 blocks, 0.8% fragmentation) /dev/ad0s3d: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s3d: clean, 93247 free (215 frags, 11629 blocks, 0.2% fragmentation) Setting hostname: prolepsis.math.uiuc.edu. DHCPREQUEST on bfe0 to 255.255.255.255 port 67 DHCPACK from 130.126.110.10 bound to 130.126.111.24 -- renewal in 1800 seconds. bfe0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=8<VLAN_MTU> inet6 fe80::20b:dbff:fe99:e8c7%bfe0 prefixlen 64 scopeid 0x1 inet 130.126.111.24 netmask 0xfffffc00 ether 00:0b:db:99:e8:c7 media: Ethernet autoselect (100baseTX <full-duplex>) status: active lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet 127.0.0.1 netmask 0xff000000 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 Additional routing options: . Starting devd. Starting ums0 moused: . hw.acpi.cpu.cx_lowest: C1 -> C1 dhclient bfe0: already running? dhclient bfe0: already running? Mounting NFS file systems: . Creating and/or trimming log files: . Starting syslogd. Checking for core dump on /dev/ad0s2b... savecore: unable to open bounds file, using 0 savecore: no dumps found ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib /usr/local/lib/compat/pkg a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout /usr/X11R6/lib/aout Starting usbd. Starting local daemons: . Updating motd . Configuring syscons: blanktime screensaver . Starting sshd. Initial i386 initialization: . Additional ABI support: linux . Starting cron. Local package initialization: . Additional TCP options: . Starting default moused: . Starting background file system checks in 60 seconds. Sat Jul 23 00:31:15 UTC 2005 Jul 23 00:31:19 prolepsis login: ROOT LOGIN (root) ON ttyv0 [-- Attachment #4 --] Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 7.0-CURRENT #4: Fri Jul 22 23:53:40 UTC 2005 kaduk@prolepsis.math.uiuc.edu:/usr/obj/usr/src/sys/PROLEPSIS Preloaded elf kernel "/boot/kernel/kernel" at 0xc084d000. Preloaded elf module "/boot/kernel/linux.ko" at 0xc084d158. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc084d204. Calibrating clock(s) ... i8254 clock: 1193172 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2492653032 Hz CPU: Mobile Intel(R) Pentium(R) 4 - M CPU 2.50GHz (2492.65-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x4400<CNTX-ID,<b14>> real memory = 1073405952 (1023 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c25000 - 0x000000003ed76fff, 1041571840 bytes (254290 pages) avail memory = 1041526784 (993 MB) bios32: Found BIOS32 Service Directory header at 0xc00ffe80 bios32: Entry = 0xffe90 (c00ffe90) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xc96e pnpbios: Found PnP BIOS data at 0xc00fe2d0 pnpbios: Entry = f0000:e2f4 Rev = 1.0 pnpbios: Event flag at 4b4 Other BIOS signatures found: random: <entropy source, Software, Yarrow> mem: <memory> Pentium Pro MTRR support enabled io: <I/O> null: <null device, zero device> npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <DELL CPi R > on motherboard acpi0: [MPSAFE] pci_open(1): mode 1 addr port (0x0cf8) is 0x8000eac4 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=1a308086) pcibios: BIOS version 2.10 Found $PIR table, 9 entries at 0xc00fc580 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 29 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 B 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 29 D 0x6b 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 C 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 30 D 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 0 31 A 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 0 31 B 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 1 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15 embedded 2 0 A 0x62 3 4 5 6 7 9 10 11 12 14 15 embedded 2 1 A 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 2 1 B 0x63 none embedded 2 3 A 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 2 3 B 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 8 0 A 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 8 0 B 0x63 3 4 5 6 7 9 10 11 12 14 15 embedded 8 1 A 0x61 3 4 5 6 7 9 10 11 12 14 15 embedded 8 1 B 0x63 3 4 5 6 7 9 10 11 12 14 15 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 atpic: Programming IRQ9 as level/low pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0 pci_link0: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 9 10 11 pci_link0: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 9 10 11 pci_link0: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 9 10 11 pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0 pci_link1: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 5 7 pci_link1: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 5 7 pci_link1: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 5 7 pci_link2: <ACPI PCI Link LNKC> irq 11 on acpi0 pci_link2: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 9 10 11 pci_link2: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 9 10 11 pci_link2: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 9 10 11 pci_link3: <ACPI PCI Link LNKD> irq 11 on acpi0 pci_link3: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 5 7 9 10 11 pci_link3: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 5 7 9 10 11 pci_link3: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 5 7 9 10 11 pci_link4: <ACPI PCI Link LNKE> on acpi0 pci_link4: Links after initial probe: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link4: Links after initial validation: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link4: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link5: <ACPI PCI Link LNKH> irq 11 on acpi0 pci_link5: Links after initial probe: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link5: Links after initial validation: Index IRQ Rtd Ref IRQs 0 11 N 0 3 4 5 6 7 9 10 11 12 14 15 pci_link5: Links after disable: Index IRQ Rtd Ref IRQs 0 255 N 0 3 4 5 6 7 9 10 11 12 14 15 ACPI timer: 0/10 0/10 0/10 0/10 0/10 0/10 0/10 0/10 0/10 0/10 -> 0 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 acpi_throttle0: P_CNT from P_BLK 0x8e0 acpi_acad0: <AC Adapter> on acpi0 acpi_cmbat0: <Control Method Battery> on acpi0 acpi_cmbat1: <Control Method Battery> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 found-> vendor=0x8086, dev=0x1a30, revid=0x04 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 3, range 32, base e8000000, size 27, enabled found-> vendor=0x8086, dev=0x1a31, revid=0x04 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24c2, revid=0x03 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type 4, range 32, base 0000bf80, size 5, enabled pcib0: matched entry for 0.29.INTA (src \\_SB_.PCI0.LNKA:0) pcib0: slot 29 INTA routed to irq 11 via \\_SB_.PCI0.LNKA found-> vendor=0x8086, dev=0x24c4, revid=0x03 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[20]: type 4, range 32, base 0000bf40, size 5, enabled pcib0: matched entry for 0.29.INTB (src \\_SB_.PCI0.LNKD:0) pcib0: slot 29 INTB routed to irq 11 via \\_SB_.PCI0.LNKD found-> vendor=0x8086, dev=0x24c7, revid=0x03 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=11 map[20]: type 4, range 32, base 0000bf20, size 5, enabled pcib0: matched entry for 0.29.INTC (src \\_SB_.PCI0.LNKC:0) pcib0: slot 29 INTC routed to irq 11 via \\_SB_.PCI0.LNKC found-> vendor=0x8086, dev=0x24cd, revid=0x03 bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base f4fffc00, size 10, enabled pcib0: matched entry for 0.29.INTD (src \\_SB_.PCI0.LNKH:0) pcib0: slot 29 INTD routed to irq 11 via \\_SB_.PCI0.LNKH found-> vendor=0x8086, dev=0x2448, revid=0x83 bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x8080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24cc, revid=0x03 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24ca, revid=0x03 bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[20]: type 4, range 32, base 0000bfa0, size 4, enabled map[24]: type 1, range 32, base 00000000, size 10, memory disabled found-> vendor=0x8086, dev=0x24c5, revid=0x03 bus=0, slot=31, func=5 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 0000b800, size 8, enabled map[14]: type 4, range 32, base 0000bc40, size 6, enabled map[18]: type 1, range 32, base f4fff800, size 9, enabled map[1c]: type 1, range 32, base f4fff400, size 8, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LNKB:0) pci_link1: Picked IRQ 9 with weight 0 pcib0: slot 31 INTB routed to irq 9 via \\_SB_.PCI0.LNKB found-> vendor=0x8086, dev=0x24c6, revid=0x03 bus=0, slot=31, func=6 class=07-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 0000b400, size 8, enabled map[14]: type 4, range 32, base 0000b080, size 7, enabled pcib0: matched entry for 0.31.INTB (src \\_SB_.PCI0.LNKB:0) pcib0: slot 31 INTB routed to irq 9 via \\_SB_.PCI0.LNKB agp0: <Intel 82845 host to AGP bridge> mem 0xe8000000-0xefffffff at device 0.0 on pci0 agp0: Reserved 0x8000000 bytes for rid 0x10 type 3 at 0xe8000000 agp0: allocating GATT for aperture of size 128M pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xc000-0xcfff pcib1: memory decode 0xfc000000-0xfdffffff pcib1: prefetched decode 0xf0000000-0xf3ffffff pci1: <ACPI PCI bus> on pcib1 pci1: physical bus=1 found-> vendor=0x10de, dev=0x0286, revid=0xa1 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0027, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base fc000000, size 24, enabled pcib1: (null) requested memory range 0xfc000000-0xfcffffff: good map[14]: type 3, range 32, base f0000000, size 26, enabled pcib1: (null) requested memory range 0xf0000000-0xf3ffffff: good pcib1: matched entry for 1.0.INTA (src \\_SB_.PCI0.LNKA:0) pcib1: slot 0 INTA routed to irq 11 via \\_SB_.PCI0.LNKA pci1: <display, VGA> at device 0.0 (no driver attached) uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xbf80-0xbf9f irq 11 at device 29.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf80 uhci0: [GIANT-LOCKED] usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xbf40-0xbf5f irq 11 at device 29.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf40 uhci1: [GIANT-LOCKED] usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xbf20-0xbf3f irq 11 at device 29.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbf20 uhci2: [GIANT-LOCKED] usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0: <Intel 82801DB/DBL/DBM (ICH4) USB 2.0 controller> mem 0xf4fffc00-0xf4ffffff irq 11 at device 29.7 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xf4fffc00 ehci0: [GIANT-LOCKED] usb3: EHCI version 1.0 usb3: companion controllers, 2 ports each: usb0 usb1 usb2 usb3: <Intel 82801DB/DBL/DBM (ICH4) USB 2.0 controller> on ehci0 usb3: USB revision 2.0 uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub3: 6 ports with 6 removable, self powered pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0xd000-0xefff pcib2: memory decode 0xf6000000-0xfbffffff pcib2: prefetched decode 0xfff00000-0xfffff pcib2: Subtractively decoded bridge. pci2: <ACPI PCI bus> on pcib2 pci2: physical bus=2 found-> vendor=0x14e4, dev=0x4401, revid=0x01 bus=2, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base faffe000, size 13, enabled pcib2: (null) requested memory range 0xfaffe000-0xfaffffff: good pcib2: matched entry for 2.0.INTA (src \\_SB_.PCI0.LNKC:0) pcib2: slot 0 INTA routed to irq 11 via \\_SB_.PCI0.LNKC found-> vendor=0x104c, dev=0xac44, revid=0x02 bus=2, slot=1, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0000, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x07 (1750 ns) intpin=a, irq=255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base 00000000, size 12, memory disabled found-> vendor=0x104c, dev=0x8029, revid=0x00 bus=2, slot=1, func=1 class=0c-00-10, hdrtype=0x00, mfdev=1 cmdreg=0x0116, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base faffd800, size 11, enabled pcib2: (null) requested memory range 0xfaffd800-0xfaffdfff: good map[14]: type 1, range 32, base faff8000, size 14, enabled pcib2: (null) requested memory range 0xfaff8000-0xfaffbfff: good pcib2: matched entry for 2.1.INTA (src \\_SB_.PCI0.LNKD:0) pcib2: slot 1 INTA routed to irq 11 via \\_SB_.PCI0.LNKD found-> vendor=0x14e4, dev=0x4324, revid=0x02 bus=2, slot=3, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base faff6000, size 13, enabled pcib2: (null) requested memory range 0xfaff6000-0xfaff7fff: good pcib2: matched entry for 2.3.INTA (src \\_SB_.PCI0.LNKB:0) pcib2: slot 3 INTA routed to irq 9 via \\_SB_.PCI0.LNKB bfe0: <Broadcom BCM4401 Fast Ethernet> mem 0xfaffe000-0xfaffffff irq 11 at device 0.0 on pci2 bfe0: Reserved 0x2000 bytes for rid 0x10 type 3 at 0xfaffe000 miibus0: <MII bus> on bfe0 bmtphy0: <BCM4401 10/100baseTX PHY> on miibus0 bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bfe0: bpf attached bfe0: Ethernet address: 00:0b:db:99:e8:c7 bfe0: [MPSAFE] cbb0: <TI4510 PCI-CardBus Bridge> at device 1.0 on pci2 pcib2: cbb0 requested memory range 0xf6000000-0xfbffffff: good cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xf6000000 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pcib2: matched entry for 2.1.INTA (src \\_SB_.PCI0.LNKD:0) pcib2: slot 1 INTA routed to irq 11 via \\_SB_.PCI0.LNKD cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0xac44104c 0x02100007 0x06070002 0x00822008 0x10: 0xf6000000 0x020000a0 0x20040302 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc 0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b 0x40: 0x013e1028 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x28407061 0x00000000 0x001f0000 0x012c1202 0x90: 0x606483c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe120001 0x00c00000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 fwohci0: vendor=104c, dev=8029 fwohci0: vendor=104c, dev=8029 fwohci0: <1394 Open Host Controller Interface> mem 0xfaffd800-0xfaffdfff,0xfaff8000-0xfaffbfff irq 11 at device 1.1 on pci2 fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xfaffd800 fwohci0: [MPSAFE] fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 46:4f:c0:00:1d:2f:1c:61 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) pci2: <network> at device 3.0 (no driver attached) pci2:3:0: Transition from D0 to D3 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH4 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xbfa0-0xbfaf at device 31.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xbfa0 ata0: <ATA channel 0> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata0: [MPSAFE] ata1: <ATA channel 1> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER> ata1: [MPSAFE] pcm0: <Intel ICH4 (82801DB)> port 0xb800-0xb8ff,0xbc40-0xbc7f mem 0xf4fff800-0xf4fff9ff,0xf4fff400-0xf4fff4ff irq 9 at device 31.5 on pci0 pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xb800 pcm0: Reserved 0x40 bytes for rid 0x14 type 4 at 0xbc40 pcm0: [GIANT-LOCKED] pcm0: <SigmaTel STAC9750/51 AC97 Codec (id = 0x83847650)> pcm0: Codec features headphone, 20 bit DAC, 20 bit ADC, 5 bit master volume, SigmaTel 3D Enhancement pcm0: Primary codec extended features variable rate PCM, reserved 1, AMAP, reserved 4 pcm0: sndbuf_setmap 3e75d000, 4000; 0xed2eb000 -> 3e75d000 pcm0: sndbuf_setmap 3e759000, 4000; 0xed2ef000 -> 3e759000 pci0: <simple comms, generic modem> at device 31.6 (no driver attached) pci0:31:6: Transition from D0 to D3 acpi_tz0: <Thermal Zone> on acpi0 psmcpnp0: <PS/2 mouse port> irq 12 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 atkbd0: [GIANT-LOCKED] psm0: current command byte:0065 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model GlidePoint, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000008, packet size:3 psm0: syncmask:c0, syncbits:00 sio0: irq maps: 0xa01 0xa09 0xa01 0xa01 sio0: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 flags 0x10 on acpi0 sio0: type 16550A ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 1 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sc: sc0 already exists; skipping it sio: sio0 already exists; skipping it vga: vga0 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcf7ff,0xcf800-0xcffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) sio1 failed to probe at port 0x2f8 irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vt0: not probed (disabled) isa_probe_children: probing PnP devices ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. Device configuration finished. Timecounter "TSC" frequency 2492653032 Hz quality 800 Timecounters tick every 1.000 msec Linux ELF exec handler installed lo0: bpf attached acpi_acad0: acline initialization start acpi_acad0: On Line acpi_acad0: acline initialization done, tried 1 times acpi_cmbat0: battery initialization start acpi_cmbat0: battery initialization done, tried 1 times acpi_cmbat1: battery initialization start ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire ad0: setting PIO4 on Intel ICH4 chip ad0: setting UDMA100 on Intel ICH4 chip ad0: 76319MB <IC25N080ATMR04 0 MO4OAD0A> at ata0-master UDMA100 ad0: 156301488 sectors [155061C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad0 pcib2: pccard0 requested memory range 0xf6000000-0xfbffffff: good pccard0: CIS version PC Card Standard 5.0 pccard0: CIS info: IBM, 56K Data-Fax Modem pccard0: Manufacturer code 0x89, product 0x47 pccard0: function 0: serial port, ccr addr 300 mask 3 pccard0: function 0, config table entry 32: I/O card; irq mask ffff; iomask a, iospace 3f8-3ff; rdybsy_active io8 irqlevel powerdown audio pccard0: function 0, config table entry 33: I/O card; irq mask ffff; iomask a, iospace 2f8-2ff; rdybsy_active io8 irqlevel powerdown audio pccard0: function 0, config table entry 34: I/O card; irq mask ffff; iomask a, iospace 3e8-3ef; rdybsy_active io8 irqlevel powerdown audio pccard0: function 0, config table entry 35: I/O card; irq mask ffff; iomask a, iospace 2e8-2ef; rdybsy_active io8 irqlevel powerdown audio pcib2: pccard0 requested I/O range 0x3f8-0x3ff: in range pcib2: pccard0 requested memory range 0xf6000000-0xfbffffff: good sio4: <IBM 56K Data-Fax Modem> at port 0x3f8-0x3ff irq 11 function 0 config 32 on pccard0 sio4: type 16550A sio4: unable to activate interrupt in fast mode - using normal mode ata1: reiniting channel .. ata1: reset tp1 mask=03 ostat0=00 ostat1=00 ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER> ata1: reinit done .. ata1: reiniting channel .. ata1: reset tp1 mask=03 ostat0=00 ostat1=00 ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER> ata1: reinit done .. ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire acd0: setting PIO4 on Intel ICH4 chip acd0: setting UDMA33 on Intel ICH4 chip acd0: <MATSHITA CD-RW/DVD-ROM UJDA740/1.03> CDRW drive at ata1 as master acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc pcm0: measured ac97 link rate at 48012 Hz, will use 48000 Hz (probe0:sbp0:0:0:0): error 22 (probe0:sbp0:0:0:0): Unretryable Error (probe1:sbp0:0:1:0): error 22 (probe1:sbp0:0:1:0): Unretryable Error (probe2:sbp0:0:2:0): error 22 (probe2:sbp0:0:2:0): Unretryable Error (probe3:sbp0:0:3:0): error 22 (probe3:sbp0:0:3:0): Unretryable Error (probe4:sbp0:0:4:0): error 22 (probe4:sbp0:0:4:0): Unretryable Error (probe5:sbp0:0:5:0): error 22 (probe5:sbp0:0:5:0): Unretryable Error (probe6:sbp0:0:6:0): error 22 (probe6:sbp0:0:6:0): Unretryable Error Trying to mount root from ufs:/dev/ad0s3a start_init: trying /sbin/init Loading configuration files. kenv: unable to get dumpdev kernel dumps on /dev/ad0s2b Entropy harvesting: interrupts ethernet point_to_point kickstart . swapon: adding /dev/ad0s2b as swap device Starting file system checks: /dev/ad0s3a: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s3a: clean, 93581 free (829 frags, 11594 blocks, 0.7% fragmentation) /dev/ad0s3e: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s3e: clean, 122362 free (42 frags, 15290 blocks, 0.0% fragmentation) /dev/ad0s3f: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s3f: clean, 6422559 free (64215 frags, 794793 blocks, 0.8% fragmentation) /dev/ad0s3d: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s3d: clean, 93241 free (209 frags, 11629 blocks, 0.2% fragmentation) Setting hostname: prolepsis.math.uiuc.edu. DHCPREQUEST on bfe0 to 255.255.255.255 port 67 DHCPACK from 130.126.110.10 bound to 130.126.111.24 -- renewal in 1800 seconds. bfe0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=8<VLAN_MTU> inet6 fe80::20b:dbff:fe99:e8c7%bfe0 prefixlen 64 scopeid 0x1 inet 130.126.111.24 netmask 0xfffffc00 ether 00:0b:db:99:e8:c7 media: Ethernet autoselect (100baseTX <full-duplex>) status: active lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet 127.0.0.1 netmask 0xff000000 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 Additional routing options: . Starting devd. Starting ums0 moused: . hw.acpi.cpu.cx_lowest: C1 -> C1 dhclient bfe0: already running? dhclient bfe0: already running? Mounting NFS file systems: . Creating and/or trimming log files: . Starting syslogd. Checking for core dump on /dev/ad0s2b... savecore: unable to open bounds file, using 0 savecore: no dumps found ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib /usr/local/lib/compat/pkg a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout /usr/X11R6/lib/aout Starting usbd. Starting local daemons: . Updating motd . Configuring syscons: blanktime screensaver splash: image decoder found: blank_saver . Starting sshd. Initial i386 initialization: . Additional ABI support: linux . Starting cron. Local package initialization: . Additional TCP options: . Starting default moused: . Starting background file system checks in 60 seconds. Sat Jul 23 00:32:53 UTC 2005 Jul 23 00:32:59 prolepsis login: ROOT LOGIN (root) ON ttyv0help
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?47d0403c0507221754dceab60>