Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 8 May 1998 11:06:15 -0700 (PDT)
From:      Tom <tom@sdf.com>
To:        Wilko Bulte <wilko@yedi.iaf.nl>
Cc:        Terry Lambert <tlambert@primenet.com>, kpielorz@caladan.tdx.co.uk, beng@lcs.mit.edu, dec@phoenix.its.rpi.edu, freebsd-hackers@FreeBSD.ORG
Subject:   Re: dump/restore problem (was: Network problem with 2.2.6-RELEASE)
Message-ID:  <Pine.BSF.3.95q.980508110041.5270A-100000@misery.sdf.com>
In-Reply-To: <199805081641.SAA12479@yedi.iaf.nl>

next in thread | previous in thread | raw e-mail | index | archive | help

On Fri, 8 May 1998, Wilko Bulte wrote:

> DLTs need blocksizes >= 64 Kb to be kept happy streaming. I used a DLT2000
> for years on my FreeBSD box, I now have a DLT4000. I can't keep 'm streaming
> from a 4G Barracuda with the current 64kB physio() limit. Keep the tape and
> the disks on seperate SCSI channels (I have 2x NCR810).
> 
> I've never even *owned* a IDE disk, let alone used one on my system so I
> cannot comment on what this might do with DLT drives.

  Well, my DLT 4000 drive has a 2MB buffer, and I've never had a problem
making it stream properly.  Some backup situtions (tar on a fileystem with
lots of small files) are probably going troublesome, but that can be
avoided by using something like star, which uses a double-buffer
arragement.  Some have reported that star is faster than dump.

  Well, IDE is automatically not using the SCSI bus, so there is no
problem there.  So if they are reasonable drives, it should work.  I get
about 5MB/s filesystem performance, which isn't great, but more than
enough to keep a DLT4000 busy.

> Wilko
> _     ______________________________________________________________________
>  |   / o / /  _  Bulte 				  email: wilko @ yedi.iaf.nl 
>  |/|/ / / /( (_) Arnhem, The Netherlands          WWW:   http://www.tcja.nl
> ______________________________________________ Powered by FreeBSD __________

Tom


To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hackers" in the body of the message



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.95q.980508110041.5270A-100000>