Date: Wed, 14 Oct 2009 12:00:37 GMT From: Warren Block <wblock@wonkity.com> To: freebsd-gnats-submit@FreeBSD.org Subject: misc/139598: CAM reports "xptioctl: put "device pass" in your kernel config file" even when already present Message-ID: <200910141200.n9EC0b3B022909@www.freebsd.org> Resent-Message-ID: <200910141210.n9ECA2CU056454@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 139598 >Category: misc >Synopsis: CAM reports "xptioctl: put "device pass" in your kernel config file" even when already present >Confidential: no >Severity: non-critical >Priority: low >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Wed Oct 14 12:10:02 UTC 2009 >Closed-Date: >Last-Modified: >Originator: Warren Block >Release: 8.0-RC1 >Organization: >Environment: FreeBSD lightning 8.0-RC1 FreeBSD 8.0-RC1 #4: Wed Oct 14 04:51:37 MDT 2009 root@lightning:/usr/obj/usr/src/sys/LIGHTNING i386 >Description: CAM error message is wrong, reporting "device pass" is not present in the kernel even though the device is present. kernel config: ---------- include GENERIC ident LIGHTNING nocpu I486_CPU nocpu I586_CPU nooptions INET6 nooptions WITNESS nooptions INVARIANTS ---------- "device pass" is included in GENERIC. Adding it explicitly to the config file makes no difference. The device is an IDE DVDRW drive via a USB-to-IDE adapter. This error may occur with other types of devices using CAM, like USB memory card readers. /var/log/messages: ugen3.3: <vendor 0x059b> at usbus3 umass0: <vendor 0x059b USB 2.0 Storage Device, class 0/0, rev 2.00/1.03, addr 3> on usbus3 umass0: SCSI over Bulk-Only; quirks = 0x0000 umass0:1:0:-1: Attached to scbus1 (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition (probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:29,0 (probe0:umass-sim0:0:0:0): Power on, reset, or bus device reset occurred (probe0:umass-sim0:0:0:0): Retrying Command (per Sense Data) xptioctl: pass driver is not in the kernel xptioctl: put "device pass" in your kernel config file xptioctl: pass driver is not in the kernel xptioctl: put "device pass" in your kernel config file xptioctl: pass driver is not in the kernel xptioctl: put "device pass" in your kernel config file xptioctl: pass driver is not in the kernel xptioctl: put "device pass" in your kernel config file xptioctl: pass driver is not in the kernel xptioctl: put "device pass" in your kernel config file (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition (probe0:umass-sim0:0:0:0): NOT READY asc:3a,0 (probe0:umass-sim0:0:0:0): Medium not present (probe0:umass-sim0:0:0:0): Unretryable error cd0 at umass-sim0 bus 0 target 0 lun 0 cd0: <ATAPI DVD A DH20A4P 9P59> Removable CD-ROM SCSI-0 device cd0: 40.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present >How-To-Repeat: Connect external USB DVD drive or other device that uses CAM. Check log messages. Verify that kernel already has "device pass" defined. >Fix: >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200910141200.n9EC0b3B022909>