Date: Fri, 29 Sep 2006 05:03:12 +0200 From: =?iso-8859-2?Q?Daniel_Dvo=F8=E1k?= <dandee@hellteam.net> To: <freebsd-stable@freebsd.org> Subject: radeon drm does not attach Message-ID: <000901c6e373$ce9cbb00$6508280a@tocnet28.jspoj.czf>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
Hi all,
I have a problem with drm dri radeon and similar stuff for long time, and
every time it begins with (not)detection radeon X600.
In FreeBSD 6.0-RELEASE and PC-BSD 1.2(6.1-RELEASE-p2+custom kernel drm and
radeon compiled in), if drm and radeon devices are compiled in kernel, the
card is not detected correct and drm0 is not attached.
It was the same with loadding kernel modul through loader.conf in
6.0-RELEASE.
So dri r300 and similar stuff could not work at all. :(
Today I tested with 6.2-BETA1 with loadding kernel modul radeon.ko and
drm.ko through loader.conf, and IT WORKS at the end !!! Voila !
It is the first time when it works, I tried it a year ago and no success.
Is it some type of chance or really some in drm radeon and these stuff have
changed radically ???
Could anybody confirm that issue ?
It seems that drm, radeon modules compiled in kernel did not detect PCIE
cards at all.
dmesg is attached.
P.S.: I am not currently subscribed in the freebsd-stable and
freebsd-questions mailling lists, so mail me directly. Thanks.
[-- Attachment #2 --]
drm_load="YES"
radeon_load="YES"
acpi_load="YES"
acpi_asus_load="YES"
acpi_video_load="YES"
sound_load="YES"
smb_load="YES"
smbus_load="YES"
[-- Attachment #3 --]
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.2-BETA1 #0: Mon Sep 18 17:47:02 UTC 2006
root@opus.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3200+ (2200.22-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x20ff2 Stepping = 2
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
Features2=0x1<SSE3>
AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow+,3DNow>
AMD Features2=0x1<LAHF>
real memory = 2147418112 (2047 MB)
avail memory = 2096492544 (1999 MB)
ACPI APIC Table: <Nvidia AWRDACPI>
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <Nvidia AWRDACPI> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xda003000-0xda003fff at device 2.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
ehci0: <NVIDIA nForce4 USB 2.0 controller> mem 0xfeb00000-0xfeb000ff at device 2.1 on pci0
ehci0: [GIANT-LOCKED]
usb1: EHCI version 1.0
usb1: companion controller, 4 ports each: usb0
usb1: <NVIDIA nForce4 USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
ugen0: vendor 0x0458 WebCAM USB2.0, rev 2.00/1.02, addr 2
pci0: <multimedia, audio> at device 4.0 (no driver attached)
atapci0: <nVidia nForce CK804 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 6.0 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <nVidia nForce CK804 SATA300 controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xd400-0xd40f mem 0xda001000-0xda001fff irq 21 at device 8.0 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci5: <ACPI PCI bus> on pcib1
nve0: <NVIDIA nForce MCP9 Networking Adapter> port 0xc000-0xc007 mem 0xda000000-0xda000fff irq 22 at device 10.0 on pci0
nve0: Ethernet address 00:11:d8:a4:58:2f
miibus0: <MII bus> on nve0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
nve0: Ethernet address: 00:11:d8:a4:58:2f
pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci4: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pci2: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci1: <ACPI PCI bus> on pcib5
drm0: <ATI Radeon RV380 X600> port 0xb000-0xb0ff mem 0xd0000000-0xd7ffffff,0xd9000000-0xd900ffff irq 18 at device 0.0 on pci1
info: [drm] Initialized radeon 1.24.0 20060225
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xccfff,0xd0000-0xd3fff on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: Logitech USB Mouse, rev 1.10/6.20, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
Timecounter "TSC" frequency 2200223071 Hz quality 800
Timecounters tick every 1.000 msec
acd0: DVDR <NEC DVD RW ND-3520A/1.04> at ata1-master UDMA33
acd1: CDRW <NEC NR-7500A/1.20> at ata1-slave PIO4
ad4: 305245MB <WDC WD3200KS-00PFB0 21.00M21> at ata2-master SATA300
Trying to mount root from ufs:/dev/ad4s3a
Loading configuration files.
Entropy harvesting:
interrupts
ethernet
point_to_point
kickstart
.
swapon: adding /dev/ad4s3b as swap device
Starting file system checks:
/dev/ad4s3a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad4s3a: clean, 488252 free (1812 frags, 60805 blocks, 0.4% fragmentation)
/dev/ad4s3f: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad4s3f: clean, 3362649 free (3505 frags, 419893 blocks, 0.1% fragmentation)
/dev/ad4s3e: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad4s3e: clean, 506350 free (62 frags, 63286 blocks, 0.0% fragmentation)
Mounting local file systems:
.
Setting hostname: .
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
inet 127.0.0.1 netmask 0xff000000
Starting devd.
Starting ums0 moused:
.
hw.acpi.cpu.cx_lowest:
C1
->
C1
Additional routing options:
.
Mounting NFS file systems:
.
Creating and/or trimming log files:
.
Starting syslogd.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout
Initial i386 initialization:
.
Additional ABI support:
.
Starting rpcbind.
NFS access cache time=2
Starting amd.
Starting usbd.
Starting local daemons:
.
Updating motd
.
Configuring syscons:
keymap
keyrate
font8x16
font8x14
font8x8
blanktime
screensaver
logo_saver: the console does not support M_VGA_CG320
module_register_init: MOD_LOAD (logo_saver, 0xc696aac8, 0) error 19
.
Starting cron.
Local package initialization:
.
Additional TCP options:
.
Starting default moused:
.
Starting background file system checks in 60 seconds.
Thu Sep 28 23:46:57 CEST 2006
Sep 28 23:47:01 login: ROOT LOGIN (root) ON ttyv0
umass0: vendor 0x0457 USB Mass Storage Device, rev 2.00/1.00, addr 3
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <USB 2.0 Flash Disk 0.00> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 1968MB (4030464 512 byte sectors: 255H 63S/T 250C)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?000901c6e373$ce9cbb00$6508280a>